Anyone have a b4 setup for TCHR?
#1
Anyone have a b4 setup for TCHR?
I just got a B4 about 5 min ago. I called TCHR but they sold out so I went to the the hobby store 1 block away from my house and spent $10 more since I couldn't wait!
Just wanted to know what else I should get as far as shock oil or springs ect. And any other setup advice you can give me. My goal is to be running this Sat. (I have a Sat. Off!!!!)
Just wanted to know what else I should get as far as shock oil or springs ect. And any other setup advice you can give me. My goal is to be running this Sat. (I have a Sat. Off!!!!)
#2
Hi Travis this is what I'm running and it is a very easy and stable setup.
Front:30wt
#2 piston
green springs
.090 limiting
1I shock mounting
2B camber link w/3washers
25 deg. caster block
axle mid
.030 bumpsteer
arms level
-2 deg. camber
Rear:25wt
#2 piston
silver springs
.090 limiting
2I shock mounting
1B camber link w/1 washer
2 deg anti-squat
short wheelbase
-2 deg camber
bones level
battery forward
I'm running a Monster stock, geared with the stock spur, and 19 pinion. Also am running the kit tires, but get the Trinity grey foams for the rear, and stuff the stock rear foams in the front tires.
Front:30wt
#2 piston
green springs
.090 limiting
1I shock mounting
2B camber link w/3washers
25 deg. caster block
axle mid
.030 bumpsteer
arms level
-2 deg. camber
Rear:25wt
#2 piston
silver springs
.090 limiting
2I shock mounting
1B camber link w/1 washer
2 deg anti-squat
short wheelbase
-2 deg camber
bones level
battery forward
I'm running a Monster stock, geared with the stock spur, and 19 pinion. Also am running the kit tires, but get the Trinity grey foams for the rear, and stuff the stock rear foams in the front tires.
#3
The only upgrades to the car I have, is titanium camber/steering links, alum front brace, and steering bearings (tc3).
#5
Your right a Chev/Ford deal there. I like the orange controllers myself.
#6
Check out the latest set-up on the RC10B4 thread in this forum.