"targetingxmod" Brushless 4s Kyosho Mini Inferno - Nitro Diff's :)
#16
Tech Elite
Thread Starter
Is this the part? This one is a metal one, very rare to find.... even the plastic one.
-Atomic AK076
This is the plastic one:
-Kyosho IHW22
Hope that helps if that's the part you are looking for... with the part number you know where to find...
#17
AK076 yup this one! where bro? i want to use BL but the plastic might not handle the torque
Last edited by leone; 10-16-2013 at 05:58 PM. Reason: wrong answer
#18
Tech Elite
Thread Starter
Remember that i do not bash and i make sure the mesh is right everytime i open de the car!
Don't worry to much about that item... what this car eats first is drivecups and dogbones ends! At least for my drive style!
#19
Tech Elite
Thread Starter
#20
Tech Elite
Thread Starter
#21
Tech Elite
Thread Starter
#22
Tech Addict
Nice speed with that little car ! I've got the same gps for a few months now and its great.reading seems very acurate
#23
Tech Elite
Thread Starter
New video...new record on this one...
BUT...Mini Inferno "Stage 2" is ready....
-Cut some of the wing flaps, for more speed :P
-Also put a front wing pointing down...
Later!
+ YouTube Video | |
BUT...Mini Inferno "Stage 2" is ready....
-Cut some of the wing flaps, for more speed :P
-Also put a front wing pointing down...
Later!
Last edited by targetingxmod; 02-25-2016 at 01:11 AM.
#24
Tech Elite
Thread Starter
Well this ain't a 4s anymore!!
-Welcome to 2016 :P
Yes, it's even smaller then the 4s lipo it was sitting in there...and it beeps 6 times
Can't wait to test it to see what Kmh on the gps...
-The Mamba Max Pro was having the 1.32 firmware that is not compatible with 6s. But with the last firmaware or at least the 1.33 it does everything its should. I was getting worried... but no more!
-Welcome to 2016 :P
Yes, it's even smaller then the 4s lipo it was sitting in there...and it beeps 6 times
Can't wait to test it to see what Kmh on the gps...
-The Mamba Max Pro was having the 1.32 firmware that is not compatible with 6s. But with the last firmaware or at least the 1.33 it does everything its should. I was getting worried... but no more!
Last edited by targetingxmod; 03-03-2016 at 02:41 AM.
#25
Tech Elite
Thread Starter
#26
Tech Elite
Thread Starter
#27
Tech Elite
Thread Starter
So some flights later...
-Some shock tower protection, leftovers from the rear wing of my Mp9e....drilled with 3mm
-Yep!! Much better!
And i noticed my outdrivers rub the shock towers... not anymore!
-Shaved/dremelled the botton of the 2 shock tower. No more drag... more freedom.
Those aftermarket pieces sometimes are not right!!
It should give me 1 kmh extra :P
-Some shock tower protection, leftovers from the rear wing of my Mp9e....drilled with 3mm
-Yep!! Much better!
And i noticed my outdrivers rub the shock towers... not anymore!
-Shaved/dremelled the botton of the 2 shock tower. No more drag... more freedom.
Those aftermarket pieces sometimes are not right!!
It should give me 1 kmh extra :P
Last edited by targetingxmod; 03-19-2016 at 11:25 AM.
#28
Tech Elite
Thread Starter
With a blink of an eye....it went straight to concrete....
If i had the rear Tbone bumper it didn't happen! Well might as order one as fast as possible. Only thing broken was a cupdrive. I have spares. The bend stuff i hammer it to straight again!!
If i had the rear Tbone bumper it didn't happen! Well might as order one as fast as possible. Only thing broken was a cupdrive. I have spares. The bend stuff i hammer it to straight again!!
Last edited by targetingxmod; 05-10-2016 at 02:10 PM.
#29
Tech Elite
Thread Starter
Video of the crash:
Last edited by targetingxmod; 11-29-2018 at 01:45 PM.
#30
Tech Elite
Thread Starter