1/16 revo...servo issues
#1
1/16 revo...servo issues
ok i am aware there is a search button so if your gonna take time out of your life to tell me about the search option,and act cool please save it....
when i turn my wheels the servo jitters back and worth.
yes the batterys are charged...no i dont have interference(fm rx/tx)
the servo jitters no matter what kind of battery combination i have single nimh,2 nimh(series and paralell) and with one or two lipos hooked up.
this started happening out of the blue it was fine when i did a speed test with the new lipos (no i did not wire them in series,only parallel)
now experience tells me that that the battery's in the controller are dying...not the case ...fresh ones....its either a bad servo or im missing something completely.
any help would be great
when i turn my wheels the servo jitters back and worth.
yes the batterys are charged...no i dont have interference(fm rx/tx)
the servo jitters no matter what kind of battery combination i have single nimh,2 nimh(series and paralell) and with one or two lipos hooked up.
this started happening out of the blue it was fine when i did a speed test with the new lipos (no i did not wire them in series,only parallel)
now experience tells me that that the battery's in the controller are dying...not the case ...fresh ones....its either a bad servo or im missing something completely.
any help would be great
#2
Mine started doing this today. It is also loosing centre. They are good servos while they work. Also running lipo.
Think it is just best to change to a different servo.
Think it is just best to change to a different servo.
#3
i need to find out what servos will fit.
#4
i just bought the hitec hs 82 servo. it works really well. better than the stock one and a little but cheaper. i need to find a good horn for it though i dont like the one that comes on it.
#5
I bought a Scanner SSV-9317BB from the local shop. Much smaller than the stock servo but more powerful. Cheap too! Also uses a Hitec spline just like the stock one so it drops in.