NORTH AMERICAN MINI CHAMPIONSHIPS

[geeunit1014]

Originally Posted by duneland

I am sorry for the delay, but I have had a lot of irons in the fire for the last couple weeks. I will get all those things accomplished in the next couple of days if possible. As far as the 1/18 pan car class goes... Stock will be 4 cell with a 300 size motor (likely a hand out, will try to firm up the supplier on Monday. If it turns out to NOT be a hand out for this class, I will post the required motor by mid-week). Any motor/battery combo for mod. I'll post the dimensions and such in a couple days, but there won't be anything unusual there. Thanks for your patience.

Dune, if it helps you guys, i would suggest the robotronic 300 motor for both stock classes. It has worked well for us in M18's in the MRL, not too fast, not too slow. good speed for stock, and it should work well in the pan cars a well. motors are cheap and durable, and seem to be consistent from motor to motor.

[duneland]

Originally Posted by geeunit1014

Dune, if it helps you guys, i would suggest the robotronic 300 motor for both stock classes. It has worked well for us in M18's in the MRL, not too fast, not too slow. good speed for stock, and it should work well in the pan cars a well. motors are cheap and durable, and seem to be consistent from motor to motor.

It's on the 'short list'! Will make the call in the next couple of days. Even if it doesn't end up as the 1/18 tc motor, it is likely to be the pan car motor. Will let you guys know asap.

[Micro_Racer]

Any updates on classes and rules?

[duneland]

North Am
Class Rules:
On Road;

1/18 4wd Sedan
Length 256mm max.
Wheelbase 140-151mm
Width 111mm w/body
Bodies must resemble 2 or 4 door cars that have raced in a Touring car series. Mazda 6, Stratus, Alfa Romeo etc.
Stock;
5 cell 2/3 A battery
280 or 300 size motor.
Handout recommended for Championship level events.
Open;
NO BATTERY OR MOTOR RESTRICTIONS!

1/14 4wd Sedan
Length 329mm max.
Wheelbase 178mm-193mm
Width 140mm max. with body
Body; Same as 1/18 except size.
Stock;
6 cell 2/3 A battery
Kit Recoil or 380 Mabuchi closed endbell motor, ie. Carisma R380.
Open;
NO BATTERY OR MOTOR RESTRICTIONS!

1/18 2wd pan car

Length 213-253mm
Wheelbase 123-150mm
Width 116mm max. with body
Body style; Can-Am/GTP/WSC or GT/GT-1/Trans-Am
Stock;
4 cell 2/3 A battery
300 size closed endbell motor.
Open;
NO BATTERY OR MOTOR RESTRICTIONS!


Stock classes will be hand out motors. Motors will be announced soon and will fit the parameters listed above.
Will get the off-road up soon.

[Kemosobbie]

I am running the 1/14 open class. Mainly becasue I want to run Lipo.
I am thinking of running a brushed motor? Maybe the Duratraz Vr3.

[scootr117]

I must have missed this in here ....What is the schedule for this event. Offroad day vs. Onroad day...I need to schedule the time off to make it...earlier is better

[WFO7640]

What about offroad rules?

[scootr117]

Originally Posted by scootr117

I must have missed this in here ....What is the schedule for this event. Offroad day vs. Onroad day...I need to schedule the time off to make it...earlier is better

BUMP.......

[duneland]

Off-road is Sat. On-road is Sunday!

[duneland]

Class Rules:
On Road;

1/18 4wd Sedan
Length 256mm max.
Wheelbase 140-151mm
Width 111mm w/body
Bodies must resemble 2 or 4 door cars that have raced in a Touring car series. Mazda 6, Stratus, Alfa Romeo etc.
Stock;
5 cell 2/3 A battery
280 or 300 size motor.
Handout recommended for Championship level events.
Open;
NO BATTERY OR MOTOR RESTRICTIONS!

1/14 4wd Sedan
Length 329mm max.
Wheelbase 178mm-193mm
Width 140mm max. with body
Body; Same as 1/18 except size.
Stock;
6 cell 2/3 A battery
Kit Recoil or 380 Mabuchi closed endbell motor, ie. Carisma R380.
Open;
NO BATTERY OR MOTOR RESTRICTIONS!

1/18 2wd pan car

Length 213-253mm
Wheelbase 123-150mm
Width 116mm max. with body
Body style; Can-Am/GTP/WSC or GT/GT-1/Trans-Am
Stock;
4 cell 2/3 A battery
300 size closed endbell motor.
Open;
NO BATTERY OR MOTOR RESTRICTIONS!



Off Road

Mini Buggy
Length 260mm max.
Wheelbase 169mm max.
Width 194mm max.
Buggy style body.
Stock;
6 cell 2/3 A
380 (VR3) for DTX
370 kit motor for Asc.
Open;
NO BATTERY/MOTOR LIMITATIONS!

Mini Truck

Length 260mm max.
Wheelbase 169mm max.
Width 225mm max.
Truck body
Stock;
Same as buggy
Open;
NO BATTERY/MOTOR LIMITATIONS!

Mini Monster Truck







2wd off-road

This is for the Losi and like vehicles.
No stretching of chassis beyond the slider and Desert truck dimension.
Open
Motor/Battery

[sg1]

Is Sunday morning the only practice for on-road?

[duneland]

Originally Posted by sg1

Is Sunday morning the only practice for on-road?

If it were up to me, we would be able to practice till around 11 Sat. night and open around 6am Sun.
I'll have a talk with the owners and see what we can do.
You can count on what was previously posted, and we will try to get some more. We will take the jumps down and open practice up on Sat after racing... Not sure how long we can hang out.. Will let you know asap.

[Micro_Racer]

Originally Posted by duneland

We have decided to have BOTH stock and mod for 1/18 pan! We have found enough interest locally to justify the inclusion of a stock class!
We are very close to a decision on the stock 1/18 motors. Hand outs will be the same for 1/18 4wd tc and 1/18 2wd pan. stock 1/18 pan will be 4 cell 2/3 ....

What will be the stock hand out motor for the 1/18th 2wd pan class?

[Micro_Racer]

Is this race still a go?

[Micro_Racer]

Is anyone going to this race? And if so what on-raod class are you running. I was thinking of pan car stock and mod...