1/14 Recoil!!

[BIG DADDY8]

Originally Posted by BIG DADDY8

Do they make 2 degree c-hubs for the recoil?

Does anyone know?????

[YmeBP]

Originally Posted by BIG DADDY8

Does anyone know?????

I saw a company once that had aluminum c-hubs for sale not sure what degree, anyone know what the company name was i can't seem to find them anymore.

[geeunit1014]

Originally Posted by BIG DADDY8

Does anyone know?????

Sporwerks only goes down to 6*, if im not mistaken. Why do you need such a shallow angle? are you trying to get more entry steering or something?

[BIG DADDY8]

Originally Posted by geeunit1014

Sporwerks only goes down to 6*, if im not mistaken. Why do you need such a shallow angle? are you trying to get more entry steering or something?

they go down to 4 degree. We run them on asphault and with the foams(45shore) in some of the turns it traction rolls if pushed too hard. We run them with the xlr8 motor and 1500 lipos. There awsome. Went from the 6 to the 4 and seemed to handle much better. Just was looking to try something different.

[HoaRC]

Originally Posted by bigb11

For anybody who want the EXOTEK servo mounts,I have 30 pair in gun metal for sale - email me b5080@vh.net

Post a picture of the servo mounts. I used the universal servo mount - Glue

[geeunit1014]

Originally Posted by BIG DADDY8

they go down to 4 degree. We run them on asphault and with the foams(45shore) in some of the turns it traction rolls if pushed too hard. We run them with the xlr8 motor and 1500 lipos. There awsome. Went from the 6 to the 4 and seemed to handle much better. Just was looking to try something different.

If your traction rolling, theres other things you can do to get it out. If the caster change helped, maybe you could try taking some camber gain out of the front. try putting a 1mm shim under the front ballstuds on the diff case. you can always put some CA on the fronts if that doesnt help.

[BIG DADDY8]

Originally Posted by geeunit1014

If your traction rolling, theres other things you can do to get it out. If the caster change helped, maybe you could try taking some camber gain out of the front. try putting a 1mm shim under the front ballstuds on the diff case. you can always put some CA on the fronts if that doesnt help.

Does gluing the tire really help that much?

[geeunit1014]

Originally Posted by BIG DADDY8

Does gluing the tire really help that much?

yes. CA is pretty much instant traction roll cure no matter what the setup is. It will make the car push some, but you can tune around that.

[BIG DADDY8]

Originally Posted by geeunit1014

yes. CA is pretty much instant traction roll cure no matter what the setup is. It will make the car push some, but you can tune around that.

Front and rear or just the front?

[geeunit1014]

Originally Posted by BIG DADDY8

Front and rear or just the front?

Fronts only

[SpraydbySprague]

Any ideas on replacement shock pistons? There is so much blow by with the stock pistons in the Recoil shocks, the holes in the pistons are useless.

[geeunit1014]

Originally Posted by SpraydbySprague

Any ideas on replacement shock pistons? There is so much blow by with the stock pistons in the Recoil shocks, the holes in the pistons are useless.

I believe you can use the 18R piston/shaft

[SpraydbySprague]

Originally Posted by geeunit1014

I believe you can use the 18R piston/shaft

Interesting. I own both vehicles. I'll have to take some measurements.

[duneland]

The aluminum shocks for the Vendetta tc are an excellent upgrade. They are one of the best shocks I have ever used! (and that is hundreds of different shocks).

[zake540]

Originally Posted by duneland

The aluminum shocks for the Vendetta tc are an excellent upgrade. They are one of the best shocks I have ever used! (and that is hundreds of different shocks).

Are you using the springs from the detta tc also?