Robitronics Scalpel 1/18th Pan Car?

[ShadowAu]

With the lipo chassis what brands/models of lipo was it designed to fit?

[bigb11]

right now it is set up for a lipo pack that measures 67mmx37mmx15mm. i would like to make it a bit longer(73mm).

[loopedout]

any rubber tires avail for the scapel?

[theDr]

[bigb11]

Originally Posted by loopedout

any rubber tires avail for the scapel?

We should get some different compounds this week. Also here are two new things.

1. aluminum servo mounts
2. new left rear pod - you we be able to install a Novak brushless motor

Servo mounts are availible now!, also have Parma mini speed 8 bodies in stock.

[Airwave]

For now I'm using 4 cells battery and I'm very interested in LiPO...

Normally, the Lipo battery are lighter than the NiMH ones... I know that your Oval chassis could is dedicated to oval races but is the balance with a lipo really catastrophic?

What would be the consequence of a Oval chassis on a normal track? Will the car turn more on the battery side?

I looked for the Apogee lipo, the 1500 would fit perfectly the Oval chassis...

What is the model you will recommend for you saddle lipo chassis?

[bigb11]

Originally Posted by bigb11

Here it is our new lipo chassis, thanks Troy. it comes with battery hold downs.

Originally Posted by Airwave

For now I'm using 4 cells battery and I'm very interested in LiPO...

Normally, the Lipo battery are lighter than the NiMH ones... I know that your Oval chassis could is dedicated to oval races but is the balance with a lipo really catastrophic?

What would be the consequence of a Oval chassis on a normal track? Will the car turn more on the battery side?

I looked for the Apogee lipo, the 1500 would fit perfectly the Oval chassis...

What is the model you will recommend for you saddle lipo chassis?

We are working on lipo chassis right now, it was designed to use the Apogee lipo 1000. we are thinking about making it fit a longer lipo pack.

The oval chassis is designed for left turn only racing and would not handle very well.

[Airwave]

Yes, I saw that, but I was hoping that I can use the 1500MAh!

Ok so you plan to use 2 1000MAh in parallel? Something like 2S2P? Is this possible?

And after that there will be no sufficient place to mount the electronic, isn't it?

That's why the oval chassis was so interesting for me...

My receiver is SOOOOOO huge (Futaba R603FS))

[bigb11]

Originally Posted by Airwave

Yes, I saw that, but I was hoping that I can use the 1500MAh!

Ok so you plan to use 2 1000MAh in parallel? Something like 2S2P? Is this possible?

And after that there will be no sufficient place to mount the electronic, isn't it?

That's why the oval chassis was so interesting for me...

My receiver is SOOOOOO huge (Futaba R603FS))

With our chassis you could place your lipo pack on either side, I am using the right side for lipo pack, left side for speed control, receiver. Its up to you, I will sell you want ever you like. Our website is www.browneng.org.
I hope this helps you.

[RCMadness]

Originally Posted by bigb11

We should get some different compounds this week. Also here are two new things.

1. aluminum servo mounts
2. new left rear pod - you we be able to install a Novak brushless motor

Servo mounts are availible now!, also have Parma mini speed 8 bodies in stock.

I like the new pod plate that lets you use the Mongoose Motor!

[bigb11]

Originally Posted by loopedout

any rubber tires avail for the scapel?

We finally have our foam tires in stock. Fronts are 1.225 dia. and rears are 1.250 dia.

Fronts come in the following: white, blue, black, pink, xxpink, purple, xxpurple, pearl white, purple/orange, grey, xxpink/orange.

Rears come in the following: white, grey, pink, pearl white, xxpink.

Fronts are $15.00, Rears are $16.00.

Also here is our new lipo chassis.

we are going to RC Madness tommorow for the race, weather is bad here today.

Happy Holidays to all.

[ShadowAu]

Originally Posted by bigb11

We finally have our foam tires in stock. Fronts are 1.225 dia. and rears are 1.250 dia.

Fronts come in the following: white, blue, black, pink, xxpink, purple, xxpurple, pearl white, purple/orange, grey, xxpink/orange.

Rears come in the following: white, grey, pink, pearl white, xxpink.

Fronts are $15.00, Rears are $16.00.

I was never very good at the colour thing ... whats hard and whats soft?

[bigb11]

Originally Posted by bigb11

We finally have our foam tires in stock. Fronts are 1.225 dia. and rears are 1.250 dia.

Fronts come in the following: white, blue, black, pink, xxpink, purple, xxpurple, pearl white, purple/orange, grey, xxpink/orange.

Rears come in the following: white, grey, pink, pearl white, xxpink.

Fronts are $15.00, Rears are $16.00.

Also here is our new lipo chassis.

we are going to RC Madness tommorow for the race, weather is bad here today.

Happy Holidays to all.

Originally Posted by ShadowAu

I was never very good at the colour thing ... whats hard and whats soft?

black,blue,purple,xx purple -hard
white,pink,pearl white, xx pink - soft
pink/orange,purple/orange - med

[Hide]

Any UK distributors?

[bigb11]

No, not at this time. Please go to www.browneng.org we ship world wide.