A couple more pics and a very short video - (3-4 seconds) - one of my RC18's buzzing the camera at 60+ mph. The car in the video is powered by a Mamba ESC, Dynamite C4-9200kv motor and 3 cell 1320mah Thunder Power Lipo's = Motor is turning at over 102,000 rpm at full throttle - Losi pre-glued foams on all 4.
A couple more pics and a very short video - (3-4 seconds) - one of my RC18's buzzing the camera at 60+ mph. The car in the video is powered by a Mamba ESC, Dynamite C4-9200kv motor and 3 cell 1320mah Thunder Power Lipo's = Motor is turning at over 102,000 rpm at full throttle - Losi pre-glued foams on all 4.
Hi guys,
Heres a pic of my 100% real rc18 truggy it started as an 18b and was converted to a truck just as what happens in the 8th scale world
That looks sweet, yet another top ride by crabboy, Is that a brushless that I can spy in that there ??? Now I really want one of those too .. Go the Truggy.
P.s. The M18 is going great guns, I threw in my mamba and wow sticks like it is on rails... Thanks again man.
__________________
Cheers
Chow......
_____________________________________________
Action R/C Team Schumacher Driver
Schumacher Mi4 -Mi3 - LRP - Spektrum - Ko - Action R/C
That looks sweet, yet another top ride by crabboy, Is that a brushless that I can spy in that there ??? Now I really want one of those too .. Go the Truggy.
P.s. The M18 is going great guns, I threw in my mamba and wow sticks like it is on rails... Thanks again man.
Thanks Drew,
Yep its a mamba system Glad your happy with the m18 it was always good to me but you sound like your getting a bit more use out of it
loosk sweet so are the pro line rims for the half eight as well, i wanna do a buggy version with the jconcepts body and crimefighter.
did it take any modifiying or did the rims just bolt on
Yeah they are the pro-line velocity rims they fit on with amost no mods you just need some MI hex adaptors they can be found on http://www.rcmart.com/catalog/defaul...th=144_653_696I use the first ones by 3-racing. As you can see on my car the shafts do stick out a bit but nothing you cant fix with a trusty dremel
Has anyone found a stronger servo saver for the 18T?
Nobody noticed what servo I'm using??? Jr 3550 with the kimbourgh servo saver.
If you want the best steering this is the way to go
THese servos are ran in 1/12ths and they cost $95 new $40 used
best setup you can have
1.61 oz.
0.58" x 1.30" x 1.02"
38 oz in@6.0v
0.11 sec.@6.0v
Coreless Motor
Nylon Gears
__________________
Its only fast if you know how to drive it.
B.b.B - Bodies by Brandon
Xray T2---Powered By eXpress Motors and Batteries.
Cefx C12---Powered By eXpress Motors and Batteries.
My feedback- http://forums.londonrc.com/showthread.php?t=14676
well my crimefighter tires and rims got here fo my rc18b, the tires are as wide as the buggy fronts. the rims are bigger dia. then assoc. rims and with the tires mounted they are just slightly taller than the stock ae tires. i can't wait till i get the hex adapters (waiting for the shipment from hk) the tires should last much longer than the stock ones. when i get the adapters i will post how much the width gets changed with these new rims.
hey guys , got a quick question for you. im just getting into 1/18 and was wondering if i could use my extra quantum2 in an 18b or do i have to get a speedo thats just for a micro? thanks
if you can get it to fit in a 18b there is no reason why you could use the qc2, voltage is the same and amp draw is less. so the speedo would just run cooler.
Glad your happy with the m18 it was always good to me but you sound like your getting a bit more use out of it 
Similar Threads