Sounds like the other guys need to use traction compound. They are probably getting loose because they aren't saucing their tires and their tires are picking up the gunk that has adhered to the soda.
Anyone know how to program the stock esc with the RC18T? I just recently bought a used one for my 3 year old son, and I'm looking to tune it down if possible. It's got a fireball motor in it right now, but I did just pick up a new stock motor for it. He's got a very heavy throttle finger, so I need it to go much, much slower Any suggestions
__________________
SC10(MM5700), slash(MM5700), slash(stock), SC8(O.S.28XZ)
RC10GT(O.S.12CV), '93RC10 World's Edition(empty at the moment)
NTC3(stock)
Nitro 4TEC 3.3(stock)
Aquacraft Miss Vegas(stock)
use a 4 cell or 1s lipo to cut down on the power the motor gets, I've seen this suggested other places when you want a child to learn to drive an rc, depending on your radio you can also adjust it to prevent full throttle
use a 4 cell or 1s lipo to cut down on the power the motor gets, I've seen this suggested other places when you want a child to learn to drive an rc, depending on your radio you can also adjust it to prevent full throttle
I'm using the stock radio that comes with the RTR, so there's not too much adjustability. I don't want to upgrade the radio as my son has been known to throw things when he gets frustrated The battery thing sounds good though for now. I'll have to try that out. Atleast they aren't as expensive as the ones for my trucks I was also thinking about eventually buying a CC micro system. I have two MM's that I run in my trucks and I'm familiar with wide range of tunability of their systems, so I was thinking if all else fails, I could throw one of those systems in there and tune it way down using the throttle curve, punch, and timing settings. Okay, so that leads to another question: Would it possible to detune the CC micro system enough to make it manageable for a 3 year old? Has anyone tried this? thanks for the help
__________________
SC10(MM5700), slash(MM5700), slash(stock), SC8(O.S.28XZ)
RC10GT(O.S.12CV), '93RC10 World's Edition(empty at the moment)
NTC3(stock)
Nitro 4TEC 3.3(stock)
Aquacraft Miss Vegas(stock)
where can i buy metal gears for the rear end or diff gear and the ring gear
__________________
jammin x1 with ofna .26 and dx3s
custom built like nothin u can buy losi mini late model
rc18t mamba 4000kv bl and spectrum dx3s looks like an mini version of the eight t
ofna lx1 with dx3s and ofna .26 and jr servos
l4 oval car roller with LOTS of hop ups mini lst with mamba 8000kv and 4 cell lipo
i checked tower a few days ago and had all but the 18t 2 of my LHS dont have in stock nor there web pages advertise them anymore just was curius if i missed something
anyone know a good brushless system for the 18t i want to run one truck during the carpet season at my LHS and have one for outdoor racing any help would be great
Any suggestions
I was also thinking about eventually buying a CC micro system. I have two MM's that I run in my trucks and I'm familiar with wide range of tunability of their systems, so I was thinking if all else fails, I could throw one of those systems in there and tune it way down using the throttle curve, punch, and timing settings. Okay, so that leads to another question: Would it possible to detune the CC micro system enough to make it manageable for a 3 year old? Has anyone tried this? thanks for the help
Similar Threads