7.4 v lipos work fine....ive got the same 1 u mentioned for my heli....it works ausome just get a good connector....or the right 1
its HEAPS punchy and lifts the wheels up with STOCK ELECTRONICS....but i got 46mm wide foam drag slicks on the back so i duno if itll do it with stock tyres...
i just bought the DD slipper the other day....and after i buy mamba im gona get the oil shocks and IF i need it ill get the ball diff or stock up on stock diffs....
Lipos are fine, but make sure you don't over discharge them. If you do, it won't charge up again anymore, like the paper-weight I have now...
It's absolutely cactus... It's got a grand total of 4V under load..
Lipos are fine, but make sure you don't over discharge them. If you do, it won't charge up again anymore, like the paper-weight I have now...
It's absolutely cactus... It's got a grand total of 4V under load..
I have brought them back to life before , I hit it with a NIMH charge at about 1.5 amps for a short time then charged it normally, and it worked fine.. also have done this , ( I have a much more CTX ) , just sit there and keep pressing charge as it cuts out, my 7.4 was at like 3.8v, and every time i hit charge it would take a small amount so I just kept hitting it, and watching the voltage, surely but slowly it came up and then eventually it kept on charging, to full capacity, on another note I tried this again on another cell but it didn't take charge as the cell had dropped out completely.. So it may or may not work ....
__________________
Cheers
Chow......
_____________________________________________
Action R/C Team Schumacher Driver
Schumacher Mi4 -Mi3 - LRP - Spektrum - Ko - Action R/C
am just woundering whats the highest turn motor the losi esc can take as i dont have a clue and never even thought of it as we all race stock any way lol but might a bigger motor in there but i dont know what the stock esc can take?
a fully charged lipo its about 8.++ V, wont it kill the esc if voltage too high?
yeah also same qeustion, what is the lowest turn motor you have tried on Mini T sick electronics and live to tell the story about it..
thanks for all respond so far......
No it won't kill the electronics, we have and still do run one of our mini T on 8.4v 7 cell nmih which peaks at about 9.6v and no damage yet , have also stuck on an 11.1v lipo with no damage to esc but we melted the endbell on the motor (losi speed) due to excessive RPM The biggest motor that I have run is an orion big block which isn't much, didn't need more as I got brushless......
__________________
Cheers
Chow......
_____________________________________________
Action R/C Team Schumacher Driver
Schumacher Mi4 -Mi3 - LRP - Spektrum - Ko - Action R/C
Well, got my Pro Slipper kit today, and my ball diffs are in teh hobby shop, going to pick them up next time. No sign of the shocks though
Rod
__________________
Hot Bodies D4 WCE, D8
DX3R
Feedback: http://rctech.net/forum/showthread.php?t=116684&highlight=gatermaxx
Hot Bodies Racing
Thanks RCCompound, Independent R/C and Axiom Motors
what the different between pro slipper and stock slipper?
actually i am new to buggy thing, how do u adjust the slipper??
the pro slipper actually is a slipper with metal disks and proper slipper pads and a spring...the stock slipper is 2 peices of plastic and a wave washer.....
the pro slipper is better if u want to race because its more tunable
speaking of which i got a brand new spur gear bag that has 2 60T spurs in it...if ne1 is interested pm me
Similar Threads