Hello! nope, turned out to be a pretty cool idea. If you have the Speed Passion motor, take a needle nose and gently pull the female plugs out of the motor. If you also have a Speed Passion esc, the male ends will now push right into the motor. Save those female plugs from the motor however, in case you ever run a different esc than Speed Passion, then you would solder these plugs onto the esc wires, so you can push them back into the motor. Long story short, if you have a SP motor and esc, just pull those plugs from the motor and put them somewhere you wont lose them. Hope this helps, if you have any questions, just let me know!