R/C Tech Forums - View Profile: gijoe64

Go Back  R/C Tech Forums > Members List
Reload this Page >

gijoe64's Profile

gijoe64 gijoe64 is offline

Tech Master

About Me

  • About gijoe64
    Location
    Corona, Ca
    Occupation
    Sales Manager
  • Signature
    Raymon Robinson

    ARC, LRP Go Blue!!

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 03-21-2018 02:37 PM
  • Join Date: 04-20-2003
  • Referrals: 0

Friends

Showing Friends 1 to 7 of 7

Visitor Messages

Showing Visitor Messages 1 to 10 of 12
  1. gijoe64
    07-20-2015 08:37 PM - permalink
    I want to sell it all together, and this is a good deal and a great car
  2. bigbank66
    07-20-2015 07:44 PM - permalink
    Ok...im interested...work wit me can u do $280 for the rolling chassis??
  3. 08-13-2014 11:45 PM - permalink
    Hi there,
    I read a post that you did stating to go ahead and ask any questions about the kemora. I run the Kemora on several rally tracks here in Colorado. In my Tamiya xv-01 I am running 10,000 dif oil in the front and 3000 in the rear and like the performance, I just didn't know if that oil set up would transfer nicely with the Kemora. I am wondering if you have any ideas on dif oil weights for the kemora?
  4. 05-20-2014 10:00 PM - permalink
    If you are interested in Hudy set up, paypal me some $ and I'll ship ASAP. My paypal is [email protected]
  5. RCRallyGuy
    02-05-2014 12:22 PM - permalink
    Ray,
    I was wondering the difference in length of the mini 8ights a-arms and the kemora/kalahri a-arms?
  6. 07-03-2013 09:03 AM - permalink
    Hello gijoe64,
    That's how I do the gears all the time. We run 2 VMX's and a Kyosho DRX and HPI wr8 flux and have only stripped the pinion gear on the DRX which I am running with the VMX 4800 Kv motor and Esc. But I am now running a metal pinion gear in it, no prob's.
    There are some metal pinion gears for the Losi mini8 will they fit by any chance as I did read on one site that some parts are the same as Vaterra's.

    Cheers Steve
  7. 07-01-2013 11:08 AM - permalink
    Hello gijoe64.
    That's how I do the gears all the time when putting them on. We run a 2 Venom VMX's and a Kyosho DRX and a HPI Flux and have stripped the pinion gear only on the DRX which is running the Venom VMX 4800 kv motor and ESC, makes it dame quick, but have not stripped the pinion gear after putting a metal one on it. There are some metal gears for the Losi Mini8, will they fit the Kemora.

    Cheers Steve
  8. gijoe64
    07-01-2013 10:15 AM - permalink
    We are not coming out with a metal spur gear for the Kemora, when setting the gear mesh please use a strip of paper and place it between the pinion and spur gear slide motor over to the spur gear then tighten your mesh should be perfict and you should have not stripping problems
  9. 07-01-2013 07:22 AM - permalink
    Hello gijoe64.
    Can you tell me if vaterra are going to make a metal spur gear as me and my brother's Kemora's have done 6 spur gears and 3 pinion gears each and I have notice a lot of other people have done there gears into. We like the car but if we can't stop from doing gears in we will have to look the Tagon ranger or a Traxxs rally car.

    Cheers Steve
  10. 11-21-2010 01:05 PM - permalink
    Does this come with a speed control and motor

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.