disaster999
Regional Moderator
Last Activity: Yesterday 11:51 PM
User Lists
Showing Visitor Messages 1 to 2 of 2
-
hi disaster, is saw a picture of your sticker on the M17, do you have for M12s as well?
i use almost the same body layout but other colors.
is it possible to make one for me?
brgds,
Giovanni -
bandit: stator have smaller diameter rotor and less air gap. stator ID is 12.4mm it uses thicker wires on stator compare to the same IFMAR/EFRA/ROAR approved motor. It will create more magnetic field. It's able to do that cuase of the smaller ID on the stator.
Less air gap, stator and rotor, give you stronger cog, torque and less rpm. Since bandit uses 12.3mm rotor, it has less rotating mass which in return give you more rpm.
If your local track doesn't check on motor, you can use standard V10 stator with bandit rotor to give you excellent rpm with good amount of torque.
PS Standard V10 stator have ID of 14mm
490 Likes
-
JCarr liked post by disaster999 On thread : Team ORCA USA Discussion ThreadIf the program box doesnt show anything when you plug it in then most likely the mainboard is fried somehow. Talk to the shop where you bought it, or the local distributor for repairs. Doubt you can...Liked On: 04-16-2024, 03:36 AM
Posted On: 04-15-2024, 08:25 PMDan liked post by disaster999 On thread : Mugen MTC2Just better driveability. Felt better, I had more confidence, able to make small corrections and the car would respond to it. Before the felt "flat" and I had to wrestle the car on every turn. ...Liked On: 04-09-2024, 12:04 PM
Posted On: 04-08-2024, 11:12 PMBigRon liked post by disaster999 On thread : Exotek F1ultra R5The R5 is like the CW version where you can mount the battery transversely or inline so it covers carpet tracks as well.Liked On: 04-08-2024, 01:11 AM
Posted On: 04-07-2024, 06:20 PMfat500 liked post by disaster999 On thread : Exotek F1ultra R5With the announcement of the new Exotek F1ultra R5 a few weeks back, they just released new CAD drawings and a description of all the updated parts on the car. Sneak peak of the updated F1Ultra F1...Liked On: 03-28-2024, 11:58 AM
Posted On: 03-27-2024, 06:40 PMracing_jason liked post by disaster999 On thread : Exotek F1ultra R5With the announcement of the new Exotek F1ultra R5 a few weeks back, they just released new CAD drawings and a description of all the updated parts on the car. Sneak peak of the updated F1Ultra F1...Liked On: 03-28-2024, 06:39 AM
Posted On: 03-27-2024, 06:40 PMZoomies liked post by disaster999 On thread : Common programming boxThey recently released a new program box which SHOULD be easier to use https://www.hobbywingdirect.com/products/multifunction-lcd-program-box-g3 or you can use the old one...Liked On: 03-27-2024, 06:46 PM
Posted On: 03-27-2024, 02:36 AMV8 Rumble liked post by disaster999 On thread : Sponsored Driver versus Privateer: The Good, Bad, and Honest Truthhttps://scontent-hkg4-1.xx.fbcdn.net/v/t39.30808-6/428682356_18418588843033864_1171034044370893510_n.jpg?stp=dst-jpg_fr_q85&_nc_cat=100&ccb=1-7&_nc_sid=5f2048&_nc_ohc=c--kSMODE28AX_AIBsc&_nc_ht=sconte...Liked On: 03-22-2024, 03:47 AM
Posted On: 03-19-2024, 10:51 PMWayneKerr liked post by disaster999 On thread : Sponsored Driver versus Privateer: The Good, Bad, and Honest Truthhttps://scontent-hkg4-1.xx.fbcdn.net/v/t39.30808-6/428682356_18418588843033864_1171034044370893510_n.jpg?stp=dst-jpg_fr_q85&_nc_cat=100&ccb=1-7&_nc_sid=5f2048&_nc_ohc=c--kSMODE28AX_AIBsc&_nc_ht=sconte...Liked On: 03-19-2024, 11:28 PM
Posted On: 03-19-2024, 10:51 PMracing_jason liked post by disaster999 On thread : UNcorporated 12R7 (3D Printed 12th scale) by devotid DesignI would try and find a way to route the sensor cable under the battery so its a little bit cleaner. Other than that chassis looks good. Interested to see how the car hold up using regular PLA filamentLiked On: 03-14-2024, 06:18 AM
Posted On: 03-14-2024, 01:42 AMCalinative liked post by disaster999 On thread : Mugen MTC2Its pretty much the same for any car out there. I was in the same boat before pulling my hair out trying to have the same ride height for all 4 corners. Corner balance would just result in severely...Liked On: 03-07-2024, 07:35 PM
Posted On: 03-06-2024, 10:20 PMCoderc liked post by disaster999 On thread : Exotek F1ultraSome say leaving them on for too long will break down the rubber too much and basically ruin the whole tire. But Ive left them on for hours and even until they have dried and dont notice much...Liked On: 03-07-2024, 05:40 AM
Posted On: 03-06-2024, 10:32 PMCoderc liked post by disaster999 On thread : 1/10 R/C F1's...Pics, Discussions, Whatever...https://cimg2.ibsrv.net/gimg/www.rctech.net-vbulletin/447x593/image_114921d8b4eb48ace93ac4338f8f0bcb52a282bb.png Replace those KF014 may solve your issue, If it doesnt then maybe your knuckle needs...Liked On: 03-06-2024, 05:18 AM
Posted On: 03-04-2024, 05:18 PMalana07 liked post by disaster999 On thread : Mugen MTC2Just unfortunate how a certain Xray driver not once, but twice ruined his A1 and A2 main.Liked On: 03-05-2024, 06:02 PM
Posted On: 03-04-2024, 10:54 PMRick Vessell liked post by disaster999 On thread : Mugen MTC2Just unfortunate how a certain Xray driver not once, but twice ruined his A1 and A2 main.Liked On: 03-05-2024, 06:52 AM
Posted On: 03-04-2024, 10:54 PMDesertRat liked post by disaster999 On thread : $3k budget to (finally) start TC racingYou could probably save a lot more and buy a lot more by not using all overpriced Hudy products.Liked On: 03-04-2024, 02:35 PM
Posted On: 03-01-2024, 07:44 PM- Join Date
- 08-22-2001
- Total Posts
- 3,987
- Likes Received
- 490
- Likes Given
- 157
- iTrader
- Click Here
You have not created any albumsThe last 10 visitor(s) to this page were:This page has had 4,119 visitsContact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.