News @ Mini Z Dyansty
#31
Here's few thing that i know about MR-03
1. only supports 2.4Ghz PCB as the chassis is design only for it.
2. Front A-Arm suspension system not like all other mini-z (similler like PN front A Arm system)
3. Chassis is narrower as theres no need to allocate space for crystal, means the PCB is somewhere above the batteries.
4. Front part of chassis is way lower than MR-02 so this will allow new type of bodyshell..but not so sure what to call it (jeff tolong jawab)
5. If not mistaken all MR-02/MR015 rear parts compitable with MR-03
6. still uses the same mini-z VR and the small motor to power the steering...
all my info here is based on what i see from the pic, sorry if got wrong info..
1. only supports 2.4Ghz PCB as the chassis is design only for it.
2. Front A-Arm suspension system not like all other mini-z (similler like PN front A Arm system)
3. Chassis is narrower as theres no need to allocate space for crystal, means the PCB is somewhere above the batteries.
4. Front part of chassis is way lower than MR-02 so this will allow new type of bodyshell..but not so sure what to call it (jeff tolong jawab)
5. If not mistaken all MR-02/MR015 rear parts compitable with MR-03
6. still uses the same mini-z VR and the small motor to power the steering...
all my info here is based on what i see from the pic, sorry if got wrong info..
#32
#34
#35
1. only supports 2.4Ghz PCB as the chassis is design only for it.
Maybe include the traction control unit in Dnano
2. Front A-Arm suspension system not like all other mini-z (similler like PN front A Arm system)
Interchangeble with MR015 and MR02 front off set.
3. Chassis is narrower as theres no need to allocate space for crystal, means the PCB is somewhere above the batteries.
Can put in both MR015 narrow body and MR02 wide body.
4. Front part of chassis is way lower than MR-02 so this will allow new type of bodyshell..but not so sure what to call it (jeff tolong jawab)
Yes, like new type of lemans body shell.
5. If not mistaken all MR-02/MR015 rear parts compitable with MR-03
Hopefully......
6. still uses the same mini-z VR and the small motor to power the steering...
But the servo motor is coreless.
Info from other forums........
Maybe include the traction control unit in Dnano
2. Front A-Arm suspension system not like all other mini-z (similler like PN front A Arm system)
Interchangeble with MR015 and MR02 front off set.
3. Chassis is narrower as theres no need to allocate space for crystal, means the PCB is somewhere above the batteries.
Can put in both MR015 narrow body and MR02 wide body.
4. Front part of chassis is way lower than MR-02 so this will allow new type of bodyshell..but not so sure what to call it (jeff tolong jawab)
Yes, like new type of lemans body shell.
5. If not mistaken all MR-02/MR015 rear parts compitable with MR-03
Hopefully......
6. still uses the same mini-z VR and the small motor to power the steering...
But the servo motor is coreless.
Info from other forums........
#36
I would like to wish Jeff Cheong a HAPPY BIRTHDAY!!!
#37
#38
#39
Season Race Finally Over !!!
Congratulation to the driver, thanks to organizer and shop owner.
Congratulation to the driver, thanks to organizer and shop owner.
#40
Coming Up....
#41
Kau Kau Kam...
#43
Police Car...