ORCA is a well-known and established brand of R/C products, it offers a selection of quality & race proven products like brushless systems, LiPO batteries, tools & accessories......more will be released in near future !!!
ORCA factory would like to thank Malaysia RC hobbists of its overwhelming supports, and following is the ORCA battery offer in conjunction with the Chinese New Year :
PROMOTION A
ORCA 7.4V 25C 4000mah LiPO Battery Hard Case x 2packs
doriftu, it depends on what you are looking for. ORCA does have lipos that fit the M03, but unfortunately it is not a Hard Hard case lipo. If you do not mind the so called lexan type casing, then we do have one that can just fit in without modification. If you do not mind cutting out the chassis slightly(I used this chassis for the 4hour enduro race earlier this month), and it will be the regular 4000mah 25C for fun or the 4000mah 35C for enthusiatic racing. Edwinlee, I hope I also answered your question. p.s. its not the 3000Kv motor, its called 11.5T motor that can be used for regular racing.
Toh WL, I am sorry to inform you that ORCA currently does not have an ESC that can support 3 turns but there is one in the pipeline and should be out within a few months time.
MTX3-B, the gladiator ESC is an economical beginners ESC very very well suited for the M-03 class as proven by the 4 hour enduro race, drifting and leisure racing for touring. The gladiator is only rated up to 9.5T. It is sensorless but it can drive any form of bushless motors(sensored/sensorless).
doriftu, it depends on what you are looking for. ORCA does have lipos that fit the M03, but unfortunately it is not a Hard Hard case lipo. If you do not mind the so called lexan type casing, then we do have one that can just fit in without modification. If you do not mind cutting out the chassis slightly(I used this chassis for the 4hour enduro race earlier this month), and it will be the regular 4000mah 25C for fun or the 4000mah 35C for enthusiatic racing.
Hi Mike,
your reply came too late i have gotten the orca pack some time ago. Yes, the so called lexan is softer than I expected. Overall, the pack is not too bad for its price but hopefully the casing can be improve in the future.
Thanks for your inputs on the lipo fitment for my M03. Let say my M03 take a lot of beating and I cant afford to modify the chassis and sacrifice on chassis strength. However, I will modify the lipo instead to make it heavier and stiffer
Hi Mike,
your reply came too late i have gotten the orca pack some time ago. Yes, the so called lexan is softer than I expected. Overall, the pack is not too bad for its price but hopefully the casing can be improve in the future.
Thanks for your inputs on the lipo fitment for my M03. Let say my M03 take a lot of beating and I cant afford to modify the chassis and sacrifice on chassis strength. However, I will modify the lipo instead to make it heavier and stiffer
Cheers
kenneth
Kenneth, I think cutting up the chassis is alright as long as you don't cut too much. THe first one I tried, its cut pretty badly as I did not take it apart to cut it. As long as you dismantle the front part and cut it properly, its not going to make a diff to the structure as we have proven it at the 4 hours Endurance. Try not to cut too much of the chassis, just as big as the battery needs.
Orca RC Products
(WHILE STOCK LAST)
i have gotten the orca pack some time ago. Yes, the so called lexan is softer than I expected. Overall, the pack is not too bad for its price but hopefully the casing can be improve in the future. 
Similar Threads