New and used stuff for sale (engine, KO radio, servos ect)
#1
New and used stuff for sale (engine, KO radio, servos ect)
Hi all,
Some goodies for sale
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850
3. used 2X KR-408S 4 channel rx. 1 SOLD
RM 250 each
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo X2 1 booked RM 220 each
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
5. used Xceed 5A lipo regulator X2 RM 80 each
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Some goodies for sale
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850
3. used 2X KR-408S 4 channel rx. 1 SOLD
RM 250 each
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo X2 1 booked RM 220 each
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
5. used Xceed 5A lipo regulator X2 RM 80 each
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Last edited by ck960; 12-27-2010 at 07:18 AM. Reason: update
#2
BUMP!! PM to deal..
thanks
thanks
#3
updated and price NEGO!!!
BUMP!! PM to deal
updated and price NEGO!!!
updated and price NEGO!!!
#4
BUMP... all price NEGO till letgo...
Funding for new project
Funding for new project
#5
Hi all,
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720
3. used 2X KR-408S 4 channel rx. All sold thanks buyer
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150 down to RM120
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo X2 1 booked RM 220 each down to RM200
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.[/QUOTE]
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720
3. used 2X KR-408S 4 channel rx. All sold thanks buyer
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150 down to RM120
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo X2 1 booked RM 220 each down to RM200
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.[/QUOTE]
Last edited by ck960; 12-27-2010 at 07:18 AM.
#6
BUMP add new item
Hi all,
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720
3. used 2X KR-408S 4 channel rx. All sold thanks buyer
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150 down to RM120
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo X2 1 booked RM 220 each down to RM200
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear RM 200 each
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720
3. used 2X KR-408S 4 channel rx. All sold thanks buyer
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150 down to RM120
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo X2 1 booked RM 220 each down to RM200
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear RM 200 each
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Last edited by ck960; 12-27-2010 at 07:19 AM.
#7
Hi all,
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720
3. used 2X KR-408S 4 channel rx. All sold thanks buyer
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150 down to RM120
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo X2 1 booked RM 220 each down to RM200
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear RM 200 each
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
1. New engine IDM .12 EVO 4 and New IDM 2617 tune pipe
Top of the line IDM engine, seal still intact.
SOLD
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720
3. used 2X KR-408S 4 channel rx. All sold thanks buyer
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150 down to RM120
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo X2 1 booked RM 220 each down to RM200
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear RM 200 each
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
the rest still avilable... come come.... NEGO till let go!!!
#8
Hi all,
NEW YEAR price slash!!! come come....
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720 down again RM650
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150 down to RM120
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo 1 sold 1 left down to RM180
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear RM 200 each down to RM180
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70... down give me a price
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35 down give me a price
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
NEW YEAR price slash!!! come come....
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720 down again RM650
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150 down to RM120
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo 1 sold 1 left down to RM180
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear RM 200 each down to RM180
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70... down give me a price
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35 down give me a price
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
#9
Tech Addict
Hi all,
NEW YEAR price slash!!! come come....
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720 down again RM650
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150 down to RM120
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo 1 sold 1 left down to RM180
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear RM 200 each down to RM180
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70... down give me a price
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35 down give me a price
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
NEW YEAR price slash!!! come come....
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720 down again RM650
4. used KO PROPO low profile digital high speed servo PDS2511-ISC RM 150 down to RM120
Basic Information
Modulation: Digital
Torque: 6.0V: 132.5 oz-in (9.54 kg-cm)
Speed: 6.0V: 0.13 sec/60°
Weight: 1.64 oz (46.5 g)
Dimensions: Length:1.61 in (40.9 mm)
Width:0.83 in (21.1 mm)
Height:1.25 in (31.8 mm)
Gear Type: Metal
Rotation/Support: Dual Bearings
used FUTABA S9451 digital high speed servo 1 sold 1 left down to RM180
Speed:0.10sec/60° (at 6.0V)
Torque:8.7kg.cm (at 6.0V)
Size:40x20x36.6mm
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear RM 200 each down to RM180
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70... down give me a price
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35 down give me a price
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.
#10
#12
#13
update!!!
Hi all,
NEW YEAR price slash!!! come come....
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720 down again RM650
4. used KO PROPO low profile digital high speed servo PDS2511-ISC SOLD
used FUTABA S9451 digital high speed servo SOLD
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear RM 200 each down to RM180
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70... down give me a price
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35 down give me a price
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.[/QUOTE]
NEW YEAR price slash!!! come come....
Some goodies for sale lai... lai... lai... all price lowered.... funding for new project....
2. used KO PROPO EX1UR 2.4ghz set with 1 KR-408S 4 channel rx, box and manual.
DIY drop down and multi angle steering wheel (only 1 in M'sia )
(can put back to original position if preferred)
Projet 2200 lipo TX batt.
RM 850 down to RM 720 down again RM650
4. used KO PROPO low profile digital high speed servo PDS2511-ISC SOLD
used FUTABA S9451 digital high speed servo SOLD
Used 2X Sanwa Hyper ERG-VX digital high torque, metal gear RM 200 each down to RM180
Technical Information
Speed 0.10sec/60?(6V)
Torque 13kg-cm (6V)
Dimensions 39.0x20.0x37.4mm
Weight 61g
5. used Xceed 5A lipo regulator X2 RM 80 each down to RM 70... down give me a price
LiPo regulator XS. Newly developed ultra small Lipo regulator . 22mm(L) x 12mm(W) x 7mm(H).less then 7 grams only. To ensure the voltage that goes into you receiver is correct, when used with Xceed LiPo packs, we have a special lightweight regulator for dropping the voltage from 7.4V to 6V, eliminating the chance of damaging your radio equipment.
used King power 5A lipo regulator for RX RM 50 down to rm35 down give me a price
PM to deal, item in JB
COD or buyer pay shipping.
All used item is in good working condition. If COD can test before buy.
Thanks for viewing. Have a nice day.[/QUOTE]