Topeka Onroad Racing
05-15-2015, 08:01 PM
Everything looks good except the Porsche body. here's what the official Roar VTA body selections are:
Body Specifications:
Late '60s to early '70s American pony car Vintage Trans-Am bodies only.
Bolink part numbers:
BL2262 '68 Chevrolet Camaro
Also known as RJ Speed Part # BOL2262 and #1054
BL2263 '65 Ford Mustang
Also known as RJ Speed Part # BOL2263 and #1055
HPI part numbers:
17510 - 1970 Plymouth AAR 'Cuda
7494 - 1968 Chevrolet Camaro
17531 - 1969 CHEVROLET CAMARO Z28
17508 - 1965 Ford Shelby GT-350
17519 - 1966 Ford Mustang GT
104926 - 1966 FORD MUSTANG GT COUPE BODY
17546 - 1970 Ford Mustang Boss 302 (scale wing ok- NOTE THIS IS NOT A SEDAN WING, IT IS THE SMALL SCALE WING)
105106 - 1970 DODGE CHALLENGER BODY
McAllister Racing part numbers:
#286 1969 Mustang body
#295 1970 Pontiac Firebird Trans Am VTA body- 1/10- 200mm
#304 1970 CAMARO TRANS AM BODY 1/10th, 200mm, VTA Class
#305 1968 COUGAR TRANS AM BODY 1/10th, 200mm, VTA Class
For the HPI and Bolink/RJ Speed Mustangs and McAllister Cougar which are not provided with a spoiler:
A lexan spoiler of 16mm total height from trunk deck, and overall chord of 20mm is allowable. All other bodies must use the spoiler included with that specific body set as intended. Built in spoilers may not be enhanced.
Parma part numbers:
10143 - 1969 Z28 Camaro
10141 - 1970 Boss Mustang
10113 - 1970 'Cuda
Pegasus Hobbies part numbers:
PGH4001 - 1970 Camaro SS
PGH4002 - 1970 'Cuda
PGH4003 - 1970 Mustang
Protoform part numbers:
#1526 - J71
#1535-30 1971 Pontiac Firebird Trans Am
Body Specifications:
Late '60s to early '70s American pony car Vintage Trans-Am bodies only.
Bolink part numbers:
BL2262 '68 Chevrolet Camaro
Also known as RJ Speed Part # BOL2262 and #1054
BL2263 '65 Ford Mustang
Also known as RJ Speed Part # BOL2263 and #1055
HPI part numbers:
17510 - 1970 Plymouth AAR 'Cuda
7494 - 1968 Chevrolet Camaro
17531 - 1969 CHEVROLET CAMARO Z28
17508 - 1965 Ford Shelby GT-350
17519 - 1966 Ford Mustang GT
104926 - 1966 FORD MUSTANG GT COUPE BODY
17546 - 1970 Ford Mustang Boss 302 (scale wing ok- NOTE THIS IS NOT A SEDAN WING, IT IS THE SMALL SCALE WING)
105106 - 1970 DODGE CHALLENGER BODY
McAllister Racing part numbers:
#286 1969 Mustang body
#295 1970 Pontiac Firebird Trans Am VTA body- 1/10- 200mm
#304 1970 CAMARO TRANS AM BODY 1/10th, 200mm, VTA Class
#305 1968 COUGAR TRANS AM BODY 1/10th, 200mm, VTA Class
For the HPI and Bolink/RJ Speed Mustangs and McAllister Cougar which are not provided with a spoiler:
A lexan spoiler of 16mm total height from trunk deck, and overall chord of 20mm is allowable. All other bodies must use the spoiler included with that specific body set as intended. Built in spoilers may not be enhanced.
Parma part numbers:
10143 - 1969 Z28 Camaro
10141 - 1970 Boss Mustang
10113 - 1970 'Cuda
Pegasus Hobbies part numbers:
PGH4001 - 1970 Camaro SS
PGH4002 - 1970 'Cuda
PGH4003 - 1970 Mustang
Protoform part numbers:
#1526 - J71
#1535-30 1971 Pontiac Firebird Trans Am
05-16-2015, 02:35 AM
Whats up guys, so I took the information you gave me awhile ago and have been doing a little research and looking around. Watching Youtube and reading more forums. I think that the VTA class is perfect for what I'm looking for. So, as I do with most projects I mapped out the complete end goal to get an idea of what I'm looking at. I read the official VTA rules and used that to create a finished car on paper and would like to submit that here for your opinions.
Chassis: Associated TC4 Club Kit
Electronics: Novak Edge 2s/Ballistic Boss 25.5t Race Combo; Futaba s3003
Front Wheels: HPI Black 8 Spoke 0mm offset #3806
Rear Wheels: HPI Black 8 Spoke 6mm offset #3811
Front Tires: HPI #4793
Rear Tires: HPI #4797
Body: HPI Porsche 911 GT1 #7038 (With period appropriate paint job, because I don't want to be laughed at lol)
Radio: Futaba 3PL 2.4ghz w/ R2004GF receiver
This all clocks in at just over $500, I already have good 2s 5000mAh batteries and charger. I took my time to try and make sure I choose legal parts but alot of the rules indicate that the local track can change some. So I figured I'd submit here to see what you guys think. I choose that radio for its multi-model function as I would like to run my 2 off-road RC's with it as well.
Chassis: Associated TC4 Club Kit
Electronics: Novak Edge 2s/Ballistic Boss 25.5t Race Combo; Futaba s3003
Front Wheels: HPI Black 8 Spoke 0mm offset #3806
Rear Wheels: HPI Black 8 Spoke 6mm offset #3811
Front Tires: HPI #4793
Rear Tires: HPI #4797
Body: HPI Porsche 911 GT1 #7038 (With period appropriate paint job, because I don't want to be laughed at lol)
Radio: Futaba 3PL 2.4ghz w/ R2004GF receiver
This all clocks in at just over $500, I already have good 2s 5000mAh batteries and charger. I took my time to try and make sure I choose legal parts but alot of the rules indicate that the local track can change some. So I figured I'd submit here to see what you guys think. I choose that radio for its multi-model function as I would like to run my 2 off-road RC's with it as well.
Will you have time to come to Topeka tomorrow?
05-16-2015, 11:55 AM
Tech Rookie
Unfortunately I will not be able to come out tomorrow. Once this semester is over I will have more time. I had originally been looking at a few tamiya kits but it was a little difficult to decipher all the different types.
05-16-2015, 05:59 PM
05-16-2015, 06:02 PM
I won't be there either guys. My son was not doing well and ended up at Childrens Mercy having surgery (he had pyloric stenosis). Things are ok now, but needless to say, RC racing is low on my list of things to do right now.
have fun tomorrow, and hopefully I will be able to make it out soon!
have fun tomorrow, and hopefully I will be able to make it out soon!
05-17-2015, 03:53 AM
I won't be there either guys. My son was not doing well and ended up at Childrens Mercy having surgery (he had pyloric stenosis). Things are ok now, but needless to say, RC racing is low on my list of things to do right now.
have fun tomorrow, and hopefully I will be able to make it out soon!
have fun tomorrow, and hopefully I will be able to make it out soon!
05-17-2015, 04:28 AM
Racing is a go today folks. See everyone soon.
05-17-2015, 07:27 PM
Hey guys I came out and hung out for a while today, had a good time and saw some good friends.... I should have a car together in a couple weeks and ready to re-join the on road scene... What's the hot ticket for tires in 17.5... And gratin recomendations
05-17-2015, 08:18 PM
i'm Running RIDE tires this year and so far been really pleased with the wear. but I've paid a lot more attention to the track temp and changing to appropriate tires.
RIDE with the red lettering. 28, 32 and 36.
RIDE with the red lettering. 28, 32 and 36.
05-17-2015, 08:23 PM
Had a lot of fun today but the wind could of been a little lower speed than mach II today. my i suggest no one to ever purchase a junk Coleman 12x12 ez up tent. big piece of weak JUNK!!!! I'm fixing it and keeping the turd at home for back yard trips only.
Want to say thanks to everyone who can out and raced today. nice to see some new racers coming to enjoy the day with us. I'll be getting the points standing up sometime later this week. having internet issues at the new house and waiting to get resolved.
Want to say thanks to everyone who can out and raced today. nice to see some new racers coming to enjoy the day with us. I'll be getting the points standing up sometime later this week. having internet issues at the new house and waiting to get resolved.
05-20-2015, 06:34 AM
05-24-2015, 04:07 AM
05-27-2015, 02:41 PM
Subway Cup Points Race Results 5-3-15 & 5-17-15
05-27-2015, 02:54 PM
Subway Cup Pionts Series Race Results as of 5/17/15
Here is the points listings from the past two points races.
The first race points are from the two Mains that were ran and the second race points are from only one Main ran.
The first race points are from the two Mains that were ran and the second race points are from only one Main ran.
05-27-2015, 03:12 PM
Dee & Mee Onroad Subway Cup 2015 Season Schedule
