Turtle Trax Fall Brawl warm up 11/8 @ 1:30

[Rfury]

Just a reminder to get there on time and keep things rolling. Sunset is at 5:42 PM ET.

[Team Turtle]

Originally Posted by Rfury

Just a reminder to get there on time and keep things rolling. Sunset is at 5:42 PM ET.

Yep sign ups over at 12:30 no entries past that point. Start at 1:30 sharp!

[ShaunMac]

Weather seems to be "warming up" for the Warm-up Race on Sunday. Zero chance of rain and temps in the 70's. Couldn't ask for better weather. So come on out and let's have some fun in the dirt getting prepared for the upcoming "Fall Brawl Race" next weekend.

Look forward to seeing everyone on Sunday.

[SPEEDYCYCLONE]

Just in case, are Lights available on the track ?
also, enough AC hookups for everyone ? I may drag my race trailer there

[LMRacing]

Originally Posted by SPEEDYCYCLONE

Just in case, are Lights available on the track ?
also, enough AC hookups for everyone ? I may drag my race trailer there

we have some lights, but not enough to race by, there is enough electricity for eveyones chargers, fans, and small radios and whatnot but no trailer plugs for a/c and whatnot.

All the power is located at the drivers stand so everyone needs to bring a drop cord and a 6 way for there power and so people can run off each other.

[Rfury]

Originally Posted by K_Spec_RC

You know that thing that connects that thing to the other thing? where that twisty thing goes right? yeah that part, it broke.

rear axle snapped last race

Originally Posted by ShaunMac

Wasn't that like a month ago? Man... are parts for the Kyosho THAT hard to get?

Originally Posted by Rfury

I think in his case it has more to do with lack of funds. Parts are easy to get. If UPS or USPS do their jobs

Originally Posted by K_Spec_RC

Like Richie said, parts are easy to get, its just that I cant afford them right now. Thankfully, the SCT project has been free up to this point

Wanna a stunner? This is the part he broke.

http://www.amainhobbies.com/product_...-Wheel-Shaft-1

The entire drive shaft is $41.

[Team Turtle]

Originally Posted by SPEEDYCYCLONE

Just in case, are Lights available on the track ?
also, enough AC hookups for everyone ? I may drag my race trailer there

We should have plenty of daylight to get everything wrapped up. We run a pretty tight show when we need to. Also another reason I dropped one qualifier and dropped entry fee. Gives everyone time to get here practice, race, and still get home in time for dinner


We have plenty of room for trailers just don't prefer alot of noisy generators running. There is ample power at the track just need a drop cord to hook up to. Wouldnt recommend running air but you shouldnt need it anyway.

[Team Turtle]

For others:

I will have a few tables and chairs probably enough to pit 6 or 7 people if you dont have one to bring. These will be first come first serve.

[ShaunMac]

Originally Posted by Rfury

Wanna a stunner? This is the part he broke.

http://www.amainhobbies.com/product_...-Wheel-Shaft-1

The entire drive shaft is $41.

If he had got a B4 he would only have to spend $7.... and that's for two axles!!!

RB5 is the rich man's buggy. The B4 is for the poor fella that can barely afford to buy tires. I think Keith got the wrong buggy.

[Team Turtle]

Originally Posted by Rfury

Wanna a stunner? This is the part he broke.

http://www.amainhobbies.com/product_...-Wheel-Shaft-1

The entire drive shaft is $41.

This is why I run a B4 I can buy a new car cheaper than you can fix yours.

[Rfury]

You do get a pair of drive shafts for $41 though.

Keith is just hard on his equipment. I have not broken as much as he has.

[ShaunMac]

Originally Posted by Rfury

You do get a pair of drive shafts for $41 though.

Keith is just hard on his equipment. I have not broken as much as he has.

Those driveshafts MUST be optimized!!

Yeah... Keith only races once in a blue moon, but when he does he gives it 110%. Which usually results in POW!!! BOOM!!! BANG!!!

[Metalsoft]

I am a go for sunday, just wondering if someone would PM the directions to me coming from Garden lakes, ( or anywhere in the west rome area )

Thanks!!

[K_Spec_RC]

lol... I see how it is... I'm the new Chad huh? j/k (but not really =} )

On the brighter side, the chassis is almost ready on the SCT! Just gotta run some screws through the two halves to reinforce it a bit more.

[Rfury]

Originally Posted by rcbo

I'm thinking about selling my 4wd and building a SCT for next year.

Originally Posted by Team Turtle

ME TOO They work good on slime should work really good on a sticky surface

Now you guys have me thinking about this. Kyosho needs to hurry up with their SCT.