1Likes**Georgia Local Buy/Sell/Trade **
07-01-2012, 10:45 AM
#1516
Sakura Zero S with upgrades
Last edited by ToddOswalt; 07-01-2012 at 05:52 PM.
07-02-2012, 12:36 PM
#1517
Have a nice 22 roller fresh rebuild on diff and shocks all tlr kit car. Almost new tires needs nothing but electronics. Also have a xxx cr roller with psi carbon chassis mid motor set up, aluminum hubs, aluminum front pivot block. Ti ni hinge pins. Extended width front hubs. Diff was just cleaned and regreased, has associated B4.1 rtr aluminum shocks will have new oil shortly. Would like to trade both of these for a nice xxx sct roller with upgades or with a good assortment of extra parts. OR A nice scx 10 honcho or wraith. Have a well used dx3s transmitter that was painted black but looks nice almost like a wrap. It's works well and does the job. Only looking to trade it for a flysky gt3b with reciever in nice condition. Finally a duratrax onyx 200 nimh charger almost new with box to trade for a 5000 mah 2s Lipo battery or 2. Pm or text 7063860019 can send pics through text message. Thanks. Have some hot wheels to sell or trade for rc items if anyone collects them.
TLR 22 roller 100.00
xxx cr roller 50.00 comes with almost enough parts to build another buggy
Spektrum dx3s 40.00
duratrax onyx 200 charger 20.00
or will sell whole lot locally for 175.00
text 7063860019
Last edited by Marty78; 07-02-2012 at 12:38 PM. Reason: number
07-03-2012, 03:23 AM
#1519
07-05-2012, 05:30 PM
#1520
If anyone is interested i have a super nice generator for sale. It's practically brand new never had a gallon of gas ran thru it. It is a Generac 10,000 watt 19HP with elec start. It is a beast. Pm me if interested. It is close to 2000$ new, im asking 900 obo.
07-07-2012, 10:35 PM
#1521
ten t
anyone have losi ten t parts for sale or trade, looking for an re11 pipe
Last edited by Marty78; 07-08-2012 at 07:23 AM. Reason: option
***ATTENTION VINTAGE GUYS***
07-11-2012, 07:33 AM
#1525
f1 and drift cars for sale and other stuff
SOLDThis is a tc4 that is set up for drifting but can easily be changed over to vta or usgt. it has fully locked diffs front and rear, front aluminum axels and an hpi silvia body with mirrors, exhust pipe, and front bumper mounted intercooler. it will come with an extra body (alfa romeo 8c) and rubber tires, a hitec steering servo and a associated 2.4ghz radio and reciever, and hpi silver drift springs all around. asking $90.00 obo
SOLDthis is an hpi sprint 2 set up for drifting. it comes with rear locked diff and front one way diff. an AI super reverse digital esc and firebolt 15t brushed motor. no foam bumber or body and comes on rubber tires. great car for drifting or vta ill include the front diff and spare parts. $40.00
I have a Thunderpower 8.5 modified brushless motor that is brand new and never been put into any car. it comes with the sensor wire and instruction manuel. $80.00
Also I have a speedpassions 17.5r brushless motor that has 4 races on it and still runs very strong. It also comes with the sensor wires. $40.00
This is a 3racing F109 in very good condition. Recently has been completly rebuilt and has titanium turnbuckles, 2 full sets of rubber tires, 1 set of foam tires. 2 bodies. 2 spare wing sets front and rear.
The Electronics: it has a Monter Horsepower D3 21.5 brushless motor with a Ko Pro VFS-1 bmc esc, and it comes with a Futaba S9650 highspeed steering servo. This is an AMAZING F1 car and the only reason im trying to sell it is bc ive got to much invested into touring car and its to hard for me to switch my driving styles back and forth. $300.00 obo, this thing has over $450.00 worth off electronics and gear on it.
Last edited by Mattbennett1988; 07-16-2012 at 07:02 PM.
07-11-2012, 07:44 PM
#1527
07-12-2012, 08:46 PM
#1528
** Can meet in Chattanooga/Ringgold area**
UPDATE!
Mini 8ight in great condition. Tore it down last night and completely cleaned the buggy and regreased diffs. I am looking to get into an 1/8th scale nitro, and funds are needed. That's the ONLY reason I am selling this little thing. It has the stock motor and ESC, comes with a HiTec 225-mg servo, Kimbrough servo saver, carbon front shock tower, an extra body that is painted white, new stock tires on stock wheels, and two Gens Ace 1800mah 25c 2s lipos. I will also include the stock servo and saver. car has been re-soldered to use Dean's connectors.
Car has the normal scrapes on the bottom of the chassis plate and some light marring on plastic undercarriage pieces such as suspension arms. Other than that, the only thing that needs to be replaced is the front bumper. I will be including numerous replacement parts. Extra shock caps and rod ends for the shocks, extra gearboxes, hinge pins, Spindles and hub carriers, suspension mounts, and an entire set of new ball cups.
Ready to rock and roll with the transmitter that came with it, but If at all possible, I would suggest binding it with a better Spektrum transmitter if you have one.
Asking $250, or possible trades for an 1/8th scale nitro roller.
UPDATE!
Mini 8ight in great condition. Tore it down last night and completely cleaned the buggy and regreased diffs. I am looking to get into an 1/8th scale nitro, and funds are needed. That's the ONLY reason I am selling this little thing. It has the stock motor and ESC, comes with a HiTec 225-mg servo, Kimbrough servo saver, carbon front shock tower, an extra body that is painted white, new stock tires on stock wheels, and two Gens Ace 1800mah 25c 2s lipos. I will also include the stock servo and saver. car has been re-soldered to use Dean's connectors.
Car has the normal scrapes on the bottom of the chassis plate and some light marring on plastic undercarriage pieces such as suspension arms. Other than that, the only thing that needs to be replaced is the front bumper. I will be including numerous replacement parts. Extra shock caps and rod ends for the shocks, extra gearboxes, hinge pins, Spindles and hub carriers, suspension mounts, and an entire set of new ball cups.
Ready to rock and roll with the transmitter that came with it, but If at all possible, I would suggest binding it with a better Spektrum transmitter if you have one.
Asking $250, or possible trades for an 1/8th scale nitro roller.
Last edited by Ehatcher; 07-13-2012 at 03:29 PM.
07-13-2012, 03:38 AM
#1529
Rc8e converted to rc8be ARTR
Rc8e converted to rc8be minus a b c d plates just add radio battery and go. This is the buggy I raced till this spring,
includes AE servo and Castle Mamba Monster 2200 combo plus whatever spares parts I have.
The mamba monster esc and motor have 2 race days on them after recieving them as a warranty replacement from caste creations and is worth almost the total price I am asking for everything.
$275.00 picked up near Suwanee add $10.00 if shipped with trackable shipping.
Cash in person or Paypal only
email [email protected] for faster response
includes AE servo and Castle Mamba Monster 2200 combo plus whatever spares parts I have.
The mamba monster esc and motor have 2 race days on them after recieving them as a warranty replacement from caste creations and is worth almost the total price I am asking for everything.
$275.00 picked up near Suwanee add $10.00 if shipped with trackable shipping.
Cash in person or Paypal only
email [email protected] for faster response
07-13-2012, 10:30 AM
#1530
ten t
I have a nice losi ten t artr for sale. price is 150.00 only needs a radio system and a tire reglued, runs great motor has only been ran 6-8 times. will be at dalton rc saturday for the races. call or text 7063860019 will look a trade offers on a nice 2wd short course truck
Last edited by Marty78; 07-13-2012 at 01:33 PM. Reason: option