I'm just wondering WHY I have to wait 3 days you guys to Post my Orders?
Come On guys Is that a Chinese Holiday or something?
how comes Putting 10 items into an envolope takes 2-3 days?
My orders Still not been Posted!
Never had to wait that Long before with RCMARKET!
That was My first and the Last order from you guys!:mad:

*click the image to buy
The Yeah Racing Li-Po Racing Pack Battery 5200mAh 7.4V has just arrived rcMart.com.
This new li-po battery (#LP-0051) is specifically developed for all 1/10 explosive RC cars. It makes the cars perform speedy! Most of the RC drivers comment it is a MUST buy item especially for the competition! The process of installation is very simple and time-saving which applies to all RC cars. Just strengthen your car with this powerful li-po battery!

Feature:
# For: 1/10 RC Car
Specification:
# Discharge rate: 30C
# Burst Rate: 50C
# Capacity:5000mAh
# Voltage:7.4v
# Length: Approx. 137mm
# Width: Approx. 46mm
# Height: Approx. 25mm
# Net: Approx. 290g
Why go Li-Po?
# Runtime up to 30% longer than traditional NiMH/NiCd (of the same capacity).
# Weight up to 40% lighter than traditional NiMH/NiCd (of the same capacity).
# Li-Po power delivery ensures maximum power throughout the discharge cycle.
# Less internal resistance offered by advanced cell fusion technology.
# Less energy lost in form of heat makes a greater power output.
# Complicated maintenance-free or conditioning-free.
# Balancing port included.
# Compatibles 90% of 1/10 scale chassis with little or zero modification.
# Can be used and recharged unlimited times per session.
# Less cost over time as longer lifespan up to 10 times that of NiMH/NiCd.
# Sealed case makes perfect for tracks looking.
Where to buy?
http://www.rcmart.com/catalog/rc-bat...h-p-29930.html

*Click the image for more information
The Yeah Racing Aluminum Front Gear Box Joint for M05 & M05 PRO just released @ yeahracing.com

Description:
# These are the Yeah Racing Aluminum Front Gear Box Joint (BU) for Tamiya M05 & M05 Pro.
# Great upgrade for the standard plastic parts or to replace broken parts
# Less flexing than standard parts
# Made of high quality aluminum
# Long lasting & durable
# Make your car looks stunning
# Easy to fit, straight forward replacement
Feature:
# For: Tamiya M05 & M05 Pro
# Material: Aluminum
# Color: Blue
Source: yeahracing

*Click the image for more information
Brand new hop ups for HPI FORMULA TEN from Yeah Racing - (#F10-042OR) Aluminum Steering Arm and (#F10-014OR) Aluminum Rear Main Drive Shaft have just arrived yeahracing.com. Please also consider the other new released hop ups for F10 - (#F10-006OR) Aluminum Knuckle Arm and (#F10-142) FRP T Bar.


Yeah Racing Aluminum Rear Main Drive Shaft (OR) for HPI Formula Ten
Description:
# These are the Yeah Racing Aluminum Rear Main Drive Shaft (OR) for HPI Formula Ten.
# Great upgrade for the standard plastic parts or to replace broken parts
# Less flexing than standard parts
# Made of high quality aluminum
# Long lasting & durable
# Make your car looks stunning
# Easy to fit, straight forward replacement
Feature:
# For: HPI Formula Ten
# Material: Aluminum
# Color: Orange

Yeah Racing Aluminum Steering Arm (OR) for HPI Formula Ten
Description:
# These are the Yeah Racing Aluminum Steering Arm (OR) for HPI Formula Ten.
# Great upgrade for the standard plastic parts or to replace broken parts
# Less flexing than standard parts
# Made of high quality aluminum
# Long lasting & durable
# Make your car looks stunning
# Easy to fit, straight forward replacement
Feature:
# For: HPI Formula Ten
# Material: Aluminum
# Color: Orange

Yeah Racing (#F10-006OR) Aluminum Knuckle Arm (OR) for HPI Formula Ten
Description:
# These are the Yeah Racing Aluminum Knuckle Arm (OR) for HPI Formula Ten.
# Great upgrade for the standard plastic parts or to replace broken parts
# Less flexing than standard parts
# Made of high quality aluminum
# Long lasting & durable
# Make your car looks stunning
# Easy to fit, straight forward replacement
Features:
# For: HPI Formula Ten
# Material: Aluminum
# Color: Orange

Yeah Racing 1.6mm/1.4mm FRP T Bar (GN) for HPI Formula Ten
*FRP T Bar is available in 2 thickness
# 1.4mm FRP T Bar (GN) - (#F10-142-1.4)
# 1.6mm FRP T Bar (GN) - (#F10-142-1.6)
Description:
# Yeah Racing FRP T Bar, produced from high quality Fibre-reinforced Plastic this T-bar comes with ultra strength and flexibility, and can be twisted nicely to cope with the shock from racing. The item can highly improve the suspension system and obtain more grip, the light in weight will also improve the top speed running of the car.
Features:
# For: HPI Formula Ten
# Material: FRP
# Color: Transparent Green
Source: Yeah Racing

*Click the image to buy
The Tamiya (#92206) 1:10 TB-03D EP Chassis Kit w/Upgrade Pack is restocked on the rcMart's shelf. Due to the popularity of this chassis, the stock is very limited so be quick to get one before it has been sold out again!

Based on the previously released TB-03D Drift Spec Chassis Kit (Item 58420), this 4WD TB-03 chassis machine features the same excellent direct drive feeling. This kit features the many drift specifications such as Super Driftech resin tires, outboard type suspension, short reversible suspension arms, soft spring damped shocks, and dedicated suspension mounts, for exciting drifting. Also included is a special Upgrade Parts Set full of Option Parts to add further value to your drift machine.
TB-03D Drift Spec Chassis Kit x 1pc.
Over 15,000 yen worth of Option Parts are included in the Upgrade Parts Set.
Motor, ESC, 2-Channel R/C system, battery pack and charger separately required.
RC 1:10, Car, Electric-Powered, On Road
Specification:
Vehicle:
Drive: 4WD
Length: 363mm
Wheelbase: 257mm
Tread Front and Rear: 165mm
Gear Ratio: 7.09: 1
Tires: F/R Width/Diameter 24mm/63m
Include:
TB-03D Chassis
Instruction
Optional parts included:
TB-02 Drive Shaft
TB-03 Aluminum Universal Propeller Shaft
TB-03 Aluminum Propeller Joint Set (Rear)
TB-03 Front One-way Unit
TB-03 Aluminum Heat Sink
TB-03D Direct Coupling
TB-03D Aluminum Bumper Support
TB-03D Aluminum Rear Upright (1 degree)
Where to buy?
http://www.rcmart.com/catalog/rc-tam...k-p-29390.html

*Click the image for more information
The Yeah Racing (#LP-0051) Li-Po Racing Pack Battery 5200mAh 7.4V is released and available @ yeahracing.com
This new li-po battery (#LP-0051) is specifically developed for all 1/10 explosive RC cars. It makes the cars perform speedy! Most of the RC drivers comment it is a MUST buy item especially for the competition! The process of installation is very simple and time-saving which applies to all RC cars. Just strengthen your car with this powerful li-po battery!

Feature:
# For: 1/10 RC Car
Specification:
# Discharge rate: 30C
# Burst Rate: 50C
# Capacity:5000mAh
# Voltage:7.4v
# Length: Approx. 137mm
# Width: Approx. 46mm
# Height: Approx. 25mm
# Net: Approx. 290g
Why go Li-Po?
# Runtime up to 30% longer than traditional NiMH/NiCd (of the same capacity).
# Weight up to 40% lighter than traditional NiMH/NiCd (of the same capacity).
# Li-Po power delivery ensures maximum power throughout the discharge cycle.
# Less internal resistance offered by advanced cell fusion technology.
# Less energy lost in form of heat makes a greater power output.
# Complicated maintenance-free or conditioning-free.
# Balancing port included.
# Compatibles 90% of 1/10 scale chassis with little or zero modification.
# Can be used and recharged unlimited times per session.
# Less cost over time as longer lifespan up to 10 times that of NiMH/NiCd.
# Sealed case makes perfect for tracks looking.

*Click the image to buy
Three of the most hottest 1/10 RC Trucks from TRAXXAS - (#5309) New REVO 3.3, (#5610) Summit and (#5805) Slash has been fully restocked @ rcMart.com. Please be hurry to get hold of them before they are gone again!!
Where to buy?
http://www.rcmart.com/catalog/kits-t...facturers_id=0

*Click the image to buy
All of the Traxxas 1/16 4WD RTR EP Truck has been restocked @ rcMart.com including the brushless and brushed model of the E-Revo and Slash. Please check the list below for the whole range:

1/16 brshless / brushed Slash
*Traxxas (#7005) 1/16 4WD Brushed Slash RTR Short Course Truck RTR (Scott Douglas/ Mike Oberg Edition)
*Traxxas (#7008) 1/16 4WD Brushless Slash RTR Short Course Truck
*Traxxas (#7008) 1/16 4WD Brushless Slash RTR Short Course Truck (Jerry Whelchel Edition)
*Traxxas (#7008) 1/16 4WD Brushless Slash RTR Short Course Truck (Rick Huseman Edition)
*Traxxas (#7008) 1/16 4WD Brushless Slash RTR Short Course Truck (Scott Douglas/ Mike Oberg Edition)
1/16 brushless / brushed E-Revo
*Traxxas (#7105) 1/16 Brushed 4WD E-Revo RTR
*Traxxas (#7108) 1/16 4WD Brushless E-Revo RTR
Where to buy?
http://www.rcmart.com/catalog/advanc...axxas+%237+rtr

*Click the image to buy
The new power supply series - Power Master Legend from Muchmore has been released and now available @ rcMart.com with 3 colours to choose from (MM-CTXPLB) Blue, (MM-CTXPLK) Black and (MM-CTXPLP) Purple.

Feature:
Light weight 1,800g
Constant current 22A x 2CHANNEL(total:44A)
Peak current 28A x 2 CHANEL at 1 sec (total 56A)
Input AC100-240ACV 50~60Hz (Auto adjusting)
Out voltage DC11.4~13.6V (Dual Adjustable)
Front service output current Max 3A & overload protector
USB output 5V 1A
Dual power monitor Black LCD display
Low noise and absolute stability
Medium alligator clips & Banana connector can be used for connecting to output terminals
Overload, short circuit, temp protector
Cellmaster legend docking system
Cooling fan RPM adjustable
Main power switch equipped
Front service output separation switch
Specification:
Constant current: 22A x 2CHANNEL(total:44A)
Peak current: 28A x 2 CHANEL at 1 sec (total 56A)
Input: AC100-240ACV 50~60Hz (Auto adjusting)
Out voltage: DC11.4~13.6V (Dual Adjustable)
Front service output: current Max 3A & overload protector
USB output: 5V 1A
Size: 263x179x52mm
Weight: 1800g
Where to buy?
http://www.rcmart.com/catalog/advanc...+master+legend

*Click the image to buy
The Team Orion Carbon Molecular Li-Po Batteries Power Pack - (#ORI14031)3800, (#ORI14030)4600, (#ORI14029)5000 and (#ORI14028)5400 has just arrived rcMart.com
New Technology
LiPo technology has been in full development in the last 5 years. Team Orion has been the first company to introduce the hardcase concept for RC cars and it became the worldwide standard. Now it is time to set the standard in term of power and performances: during 2008 Oscar Jansen, our electric R&D manager, has been working closely with our manufacturing plant to create the most powerful Lipo battery produced today.

Made for RC
The goal has been to produce cells made for the RC Car application and not to just choose existing cells from the industrial production and put them on the market. Everything started from a white page, a new factory has been established and all the production is exclusive to Team Orion.
Maximum power, maximum security
The basic idea is to produce the lowest internal resistance batteries with the highest power output able to provide the peak current required for acceleration but also to maintain the voltage under heavy load. All this has been achieved with the main goal: Maximum Security.
Multi Carbon Molecules
Multi carbon molecules are used in the construction of the LiPo batteries. The cells have the possibility to recover voltage extremely fast. This allows a 45C constant current discharge of 10 seconds which means about 250 Amps (!). For such current pure copper 12AWG wire is used, soldered directly to the cell terminals. Each cells are factory matched before assembling.

Key Features
* 45C discharge
* 3C charge
* XH Balancer Connector
* Carbon look
* Original hardcase protection
* 12AWG super flexible silicone cables
* UN tested and IATA approved
Source: Orion
Where to buy?
http://www.rcmart.com/catalog/batter..._id=79&sort=1a

*Click the image to buy
The brand new battery for Traxxas 1:16 (Slash & Revo) from Yeah Racing is now available @ rcMart.com. With the special designed plug, this battery is a direct fit for the 1:16 Slash or Revo. Li-Po powered 11.1V 1300mAh battery could extend the valuable time to enjoy the RC moment!!

Yeah Racing (#LP-0039) 11.1V 1300mAh Li-Po Battery Specifications:
Capacity: 1300mAh
Discharge Rate: 20C
Voltage: 11.1V
Weight: approx. 103.2g
Dimension (without wire): aaprox. (L)82mm x (W)30mm x (H)18mm
Source: yeahracing
Where to buy?
http://www.rcmart.com/catalog/rc-bat...g-p-29711.html

*Click the image to buy
All the way from Japan, the racing tyres which are specially designed for RC Formula. The Shimizu Racing tyres for F104 and TRG Wheel Set (Slick Tyre) and FORMULA TEN, F201 Wheel Set (Grooved Tyre) has just arrived rcMart.com.
Please check the following list for the new Shimizu Tyres:

For FORMULA TEN / F201 Wheel Set
- Shimizu Racing (#PS-0561) Soft Grooved Tyre (F) w/ Inner Sponge for Formula Ten
- Shimizu Racing (#PS-0563) Medium Grooved Tyre (F) w/ Inner Sponge for Formula Ten
- Shimizu Racing (#PS-0565) Grooved Tyre (R) w/ Inner Sponge for Formula Ten
For F104 / TRG Wheel Set
- Shimizu Racing (#PS-0571) Soft Racing Slick Tyre (F) w/ Inner Sponge for F104
- Shimizu Racing (#PS-0573) Medium Racing Slick Tyre (F) w/ Inner Sponge for F104
- Shimizu Racing (#PS-0575) Racing Slick Tyre (R) w/ Inner Sponge for F104
Where to buy?
http://www.rcmart.com/catalog/tire-w...id=277&sort=1aa

rcMart 2009 Pre X'mas Sale
Hottest RC Car Kits!! Great Prices!! Fast Shipping!!
Dear rcMart Valued Customers,
Now you may start to ponder what kinds of X'mas gifts your family or friends desire.
Here, we have the best choices for you -- the valuable & hottest R/C vehicles with the best prices ever. Click the following links to check the product details, please.
The X'mas sale will last until Nov 30, 2009. However, prompt action is highly recommended as the X'mas air mail deadline approaches.

*Click here to enlarge the newsletter
Just keep watching it!
No exaggeration BUT only satisfaction!
The Hottest RC Products, All in rcMart!
Best regards,
rcMart.com

*Click the image to buy
Brand new hop ups for HPI FORMULA TEN from Yeah Racing - (#F10-006OR) Aluminum Knuckle Arm and (#F10-142) FRP T Bar have just arrived rcMart.com


Yeah Racing (#F10-006OR) Aluminum Knuckle Arm (OR) for HPI Formula Ten
Description:
# These are the Yeah Racing Aluminum Knuckle Arm (OR) for HPI Formula Ten.
# Great upgrade for the standard plastic parts or to replace broken parts
# Less flexing than standard parts
# Made of high quality aluminum
# Long lasting & durable
# Make your car looks stunning
# Easy to fit, straight forward replacement
Features:
# For: HPI Formula Ten
# Material: Aluminum
# Color: Orange

Yeah Racing 1.6mm/1.4mm FRP T Bar (GN) for HPI Formula Ten
*FRP T Bar is available in 2 thickness
# 1.4mm FRP T Bar (GN) - (#F10-142-1.4)
# 1.6mm FRP T Bar (GN) - (#F10-142-1.6)
Description:
# Yeah Racing FRP T Bar, produced from high quality Fibre-reinforced Plastic this T-bar comes with ultra strength and flexibility, and can be twisted nicely to cope with the shock from racing. The item can highly improve the suspension system and obtain more grip, the light in weight will also improve the top speed running of the car.
Features:
# For: HPI Formula Ten
# Material: FRP
# Color: Transparent Green
Source: Yeah Racing
Where to buy?
http://www.rcmart.com/catalog/for-hp...acturers_id=47

*Click the image the buy
Do you own a HPI E10 and looking for optional hop ups but can’t find it anywhere else? Please visit rcMart.com because the Yeah Racing aluminum hop ups parts for E10 have arrived exclusively. Yeah Racing is the only manufacturer to produce the hop ups parts for HPI E10 so far. Due to no other aluminum parts for E10 available on the market, the shiny purple coated aluminum hop ups from Yeah Racing is going to make the E10 looks unique from the crowd.

E10-133PP
Aluminum F/R Gear Box Joint
for HPI E10 E10-022PP
Aluminum F/R Propeller Joint
for HPI E10 Features: Features: - For: HPI E10
- Material: Aluminum
- Color: Purple - For: HPI E10
- Material: Aluminum
- Color: Purple Includes: Includes: - Aluminum F/R Gear Box Joint (1 Pair) - Aluminum F/R Propeller Joint (1 Pair) E10-015PP
Aluminum Dog Bone
for HPI E10 E10-018SV
Aluminum Wheel Washer
for HPI E10 Features: Features: - For: HPI E10
- Material: Aluminum
- Color: Purple - For: HPI E10
- Material: Aluminum
- Color: Silver Includes: Includes: - Aluminum Dog Bone(1 Pair) - Aluminum Wheel Washer (1 Pair) E10-014V2PP
Aluminum Short Shaft
for HPI E10 E10-014PP
Aluminum Main Shaft plus Spur Gear Ring
for HPI E10 Features: Features: - For: HPI E10
- Material: Aluminum
- Color: Purple - For: HPI E10
- Material: Aluminum
- Color: Purple Includes: Includes: - Aluminum Short Shaft (1 Pc) - Aluminum Main Shaft (1 Pc)
- Spur Gear Ring (1 Pc) Source: yeahracing

Where to buy?
http://www.rcmart.com/catalog/for-hp..._737_1414.html