Just bought a rear exhaust Sirio S12-TSP and just wondering what glow plug to use. Thanks for your help in advance.

tjfm :)

I just got a hpi nitro rs4 from a guy on craigslist its looks great and i got everything to get it fired up but when i give it gas it just revs up and wont move but if i do lift it up and give it gas the wheels will move a little but not very fast. Please help me get this car running like it should

:flaming:I just got a hpi rs4 from a guy on craigslist its looks great and i got everything to get it fired up but when i give it gas it just revs up and wont move but if i do lift it up and give it gas the wheels will move a little but not very fast. Please help me get this car running like it should:flaming:

Last year at this time i had bought a mtx4r, built it and had planned to race it this past summer. However i was very busy and never got a chance to get out with it. In the mean time i had bought alot of spares and consumables.

So heres my question. the car as it is right now is bone stock. What upgrades should i look into? I was looking into a ceramic bearing kit, but does anyone sugest a brand? acer? Boca? Also is there any aluminum or titanium parts i should look at to help lighten/stengthin the car?

Thanks for any advice in advance.

Where can I find a rebuild kit for the Mugen Ninja Jx 12 "piston, sleeve" and whatever else that goes with, blew the motor awhile back would like to fix it thanks in advance

Just bought a OS T-1050 Pipe


Looking forward to see the performance ............


Can anyone who has this pipe share your experience, compare to 1040
how about the mid and high range power?

I know that osspeed has improved the bottom end power of 1050 compare to 1040, how about the mid and high range? anyone has tried it?


appreciate your information
Thanks!

I am almost embarrassed to ask this but what is the wheel offset for my Mugen MTX-3? Is it the same for the MTX-4 (I have both)? It has been a while since I had to buy tires and now it is time.

Thanks very much for helping the Nubee!

let me start off by saying that I'm not to familiar on the whole
tire truing thing I will be truing 1/8 dirt foam tires for the oval
and grooving them so I'm looking for a good machine to do this with
would like it to be 120v but 12v is OK any advice would be helpful
thanks

Looking to make a softer front bar for Serpent 966.

I had picked up the optional soft sway bar but appear to be same when measured for all different points with digital calipers

That being the case what is the most effective way to soften a blade style sway bar?

Machine it thinner, Machine it narrower or simple drill small holes in face of blade?

Thanks for the help in advance.

Press release:

PROTOform "R5-N" #1520-30

Protoform is excited to announce the immediate release of the all new “R5-N” 200mm gas sedan race body. Gas sedan bodies require numerous openings to be cut in the roof area to enable cooling and fuel filling and thus the bodies tend to become aerodynamically “dirty” and inefficient. Protoform has designed a body to minimize the net drag losses caused by these openings. The unique side windows as well as the rear window contours enhance the efficiency of the linear airflow into and out of the body - without having a negative effect on engine cooling. Every feature including the large rear wing is within EFRA/ROAR/200mm Global Body Spec dimensions. The enlarged wing struts allow for the use of larger screws for quicker trackside adjustments, and the center strut adds stability. Made to fit all the popular 200mm gas chassis this body is pulled in .030 lexan. It’s supplied with protective covering, decal sheet, window masks and wing hardware.

The "R5-N" is sure to be another “step forward” for the serious racer - something Protoform has built its reputation on.

Attached Thumbnails

       

I picked up 2 Ofna 1/10 nitro cars locally. Got them both running pretty good.

This one came with a manual listing Nitro 10, nitro 10 sprint, nitro 10 semi pro, nitro 10 team, and nitro 10 pro racer.

How do I tell which model I have?

Here are some pics if any of you are familiar with this model.

Thanks,

Mark

Attached Thumbnails

       

Is it ok to run my HPI RS4 Evo 3 with two wheel drive? I just took out the front dogbones it it looks like it might work. Will this wear out the engine faster? Thanks!

D@@m...this thing cannot read over 250 degree that i usually go above...guys ......if u run over this range, please do not buy :flaming::D

Hello, i'am new to on-road, and i have somes questions for you.
I have a Kyosho MP 7.5 Kanai III that i want to convert to on-road. What i want to do is put the Inferno GT two speed center trany (40/46) with the two speed clutchbell, put the GT shock tower, shocks and body.

But i have a doubt about the GT tranny durability. I'll run an AB moded Drag moded Jammin JPX 28 in it, and this engine put out alot of power.

I've read that somes guys put the Ipanema special tranny, but $160.00 is alot of money for a two speed tranny.

So i need to know if the inferno GT stock two speed trany is good, or i should absolutly buy the Ipanema one.

I'll not race with this car, only bash with friends in parking lots.

Thank you!

David;)

Closed