Looking to sell a roller I have obtained that needs engine/electrics to be running or could be used for a parts car. Comes with radio gear, some blue alloy hopups and a few baggies of parts. $60+shipping. Pic coming soon, waiting on batteries to charge in my cam. Should be up in the next hour or so. I do offer paypal and will ship ups with tracking available to the buyer.

I think I want to get more involved in offroad racing so I am gonna be getting rid of my XRay T2 Pro 4wd sedan. It basically has all the T2 008 upgrades on it. Also I have Tamiya shocks on the car, a Corally battery holder and a custom battery strap.

I am looking for an X-Factory X6 2wd buggy, X-60 2wd buggy or a 4wd buggy. Open to other 2wd/4wd 1/10 electric offroad trades as well.

let me know what you have.

No electronics will be included.

Chirag

Attached Thumbnails

 

I have the older style setup station by Hudy. It is sitting around, because I got out of onroad racing.

The station is for 1/10 scale onroad cars.

Included is- Hudy setup board. All fixtures that measure camber, caster, toe. Plus the droop and ride height gauges.

Asking $45 + shipping if your not in Austin, Tx.

James W.

Attached Thumbnails

   

Tekis RS used once. Sold out everywhere in the country. Shipped priority. 200.00
pm me if interested.

Two barely used 3200mah 2s Hard Case Enerland Lipos. $30 each shipped First Class in US-only.

I purchased these to run a spec class at my local track but ended up not running it. These LIPO's have maybe had 5 charges, never over-discharged and always charged with a Lipo Balancer.

Single picture attached though both are same. They have Traxxas connectors on them.

Buy from me with confidence. I have 10years of experience on feebay, maintaining PowerSeller status with 100%. PM me for my ID if you want to check me out.

Attached Thumbnails

 

I have several brand new sets of Stainless Steel Screws for large scale up for sale by RCScrewz.

PayPal only

You can check my feedback on eBay or rcnitrotalk.com under the user name robmob.
__________________________________________________ _____________
FG Marder Buggy Kit
Item No. fg002

300+ Pieces in the kit which comes in a reusable container.

Asking $35 for the set which includes Priority Mail shipping inside the USA.



__________________________________________________ _____________
FG Monster/Stadium Truck Kit
Item No. fg006

350+ Pieces in the kit which comes in a reusable container.

Asking $40 for the set which includes Priority Mail shipping inside the USA.



__________________________________________________ _____________
Duratrax Firehammer Kit
Item No. dur017

240+ Pieces in the kit which comes in a reusable container.

Asking $35 for the set which includes Priority Mail shipping inside the USA.

I have an Associated SC10 for sale. I bought it used and have only raced it on carpet since then.

Comes with
-Goosebumps all the way around
-Chassis brace
-JConcepts Body with working LEDs
-Stock-ESC,Motor,and Servo

No RX or TX

$125+ Actual Shipping(of your choice) from 46241

Only trade would be for a TC4 or TC5

-I will post new/better pics shortly-

Attached Thumbnails

 

OFNA starter box, with the dual motors. Used, but in good condition. Had a lipo in it. No connector is included on the battery wires. Rear support is cracked.

$35 shipped to lower 48


















Victor Engineering Power Supply. Used, works fine. Dirty from being used for 8th scale outdoor charging.

$35 shipped




PP only

Thanks,
Casey

This is it, the mother load of 10th scale gas truck stuff. I have not used this for a while, so it is time to clean out my stockpile of stuff.

Factory Team GT2 in great condition. Has Dynamite Platinum motor with 9 tanks on it. Shocks have IRC shock boots. Motor has IRC heavy steel flywheel. Has quick change motor mount (like an 8th buggy 2 piece motor mount). Comes with 1 used body (painted white), a new body painted orange and a new body painted light blue. Truck has Traxxas rear turnbuckles (stronger than stock).

Parts list
Used spare diff
7949 NIP brake pad
7917 NIP front arms - 2 packages
7230 NIP ball cups - 2 packages
7892 NIP front sub chassis
7983 NIP posi lock drive hub pins - 3 packages
9630 NIP ballstud washers
7955 NIP 54T spur gear
6951 NIP Stealth diff lube
7921 NIP Steering block
7927 NIP outer hinge pins
6937 NIP blue 4/40 locknuts
7914 NIP front shock tower
7940 NIP rear shock tower
7933 NIP crush tube - 2 packages
7773 NIP 6-32x3 screws
7932 NIP 1.5 degree rear hubs - 3 packages
7416 NIP threaded shock collars - 2 packages
7666 NIP diff drive rings
9621 NIP inner hinge pin set
3911 NIP transmission shim kit
7666 NIP diff rings
6574 NIP diff thrust balls
5407 NIP red silicone o-rings
7922 NIP 30 degree caster blocks
1417 NIP 2.8" titanium turnbuckles
NIP gas tank
new out of package front shock tower
new out of package rear shock tower
new out of package front upper steering support
new out of package front sub assembly
new out of package lower part of battery box
new out of package flanged bearings for clutch - 2 of them

In parts boxes I have (all out of packages) and new unless noted
7 new inner camber mounts for the rear
4 of the back rear arm mounts
3 clutch bells (1 new, 2 used)
1 FT rear chassis braces - used
1 RTR rear chassis brace
3 of the front mounts for the rear arms
10 yellow JConcepts rod ends
3 pair of rear hubs
3 rear arms
1 PRM front arm set (includes bulkhead)

Front bulkhead
5 front arms
servo horns
4 front outer hinge pins - used
1 front inner hinge pin - used
1 whole front bellcrank steering assembly - no bearings
1 set of front titanium rods
3 front bellcrank bearings
2 pairs of front knuckles
3 pair front caster blocks (new and used)

2 sets of rear hub bearings
3 front wheel bearings
2 sets of motor mounts - used
2 header springs
1 54T spur gear
1 pr CVD retainer rings
1 thrust bearing assembly
1 pair diff rings
8 outer hinge pins
1 new inner air filter
new diff case, idler gear, slipper pads
1 pair of spare used CVD's (axles and CVD's)


RPM camber gauge
AE ride height gauge
RPM toe in gauge


Starter Box included
Multiple glow ignitors
fuel bottle
Shock oil
Tons of springs
5 spare glow plugs

Updated with pics. I did not list the tires before, but there are a lot of them!































Let me know if you want pics of anything else.

TRANSPONDER, SERVOS AND RECEIVER ARE NOT INCLUDED

$270 shipped in lower 48.

Thanks,
Casey

For sale is a Losi 2.4GHz 2ch Spektrum radio and receiver from a Losi MRC.

Asking $50 shipped

All my current ads:
http://www.rctech.net/forum/r-c-item...rum-radio.html
http://www.rctech.net/forum/r-c-item...ml#post6623668
http://www.rctech.net/forum/r-c-item...ted-sc200.html
http://www.rctech.net/forum/r-c-item...ooper-rtr.html
http://www.rctech.net/forum/r-c-item...kage-sale.html
http://www.rctech.net/forum/r-c-item...ml#post6598389
http://www.rctech.net/forum/r-c-item...-pro-comp.html
http://www.rctech.net/forum/r-c-item...mg-servos.html

Attached Thumbnails

 

For sale is a TowerHobbies(Tactic) 2.4GHz 2 channel radio and receiver.

Asking $55 shipped

All my current ads:
http://www.rctech.net/forum/r-c-item...rum-radio.html
http://www.rctech.net/forum/r-c-item...ml#post6623668
http://www.rctech.net/forum/r-c-item...ted-sc200.html
http://www.rctech.net/forum/r-c-item...ooper-rtr.html
http://www.rctech.net/forum/r-c-item...kage-sale.html
http://www.rctech.net/forum/r-c-item...ml#post6598389
http://www.rctech.net/forum/r-c-item...-pro-comp.html
http://www.rctech.net/forum/r-c-item...mg-servos.html

Attached Thumbnails

 

Associated Factory Team B44.Was only ran a handfull of times. Asking $250 shipped. Comes with everything shown.

I am selling my Truggy. Its a Losi 8 T. I have ran this thing 1 time since I bought from one of our local Pros. Set is perfect. Diffs are clean. Lunsford turnbuckles,just rebuild the shocks. Ready to go. This is a roller. Nevermind the pics. I did not have time to take the Ex-Tech out before pics. The roller is a little dirty sorry for that its been sitting in my RC room for about 6 months. You will also get 2 bodies. One has little use, 1 is brand new with the colors that I was going for this winter. 2 sets of wheels and tires(new) only mounted to start break in on Trinity but ran about half of tank. Brand new extra chassis, spare arms and turnbuckles.

$275 plus shipping


I also have a Trinity EX-Tech .21 II .I bought. It is the tuned one from the factory. I started break for about a 1/2 tank. It is new. Amain sells them for 279.99 heres the link
http://www.amainhobbies.com/product_...ine-Turbo-Plug

$250 plus shipping on that

Can take some more pics. I took those in a rush before work. I am not getting out of the hobby but want to downgrade... I have been into RC planes lately and need some cash for that.. Email of PM questions. I am in Texas for shipping reasons.

Trip

i have a decent shape losi 8ight 1.0 that has everything you need except a reciever and battery to run, has a nova p5 motor with 2 gallons through it with and extra P&S and rod, a few sets of tires, a parts tray of parts, chrome top starter box, the body is a little beat up from over scoring the body when i painted it.. 400 local or 450 shipped pics will be up when i get home

Hey all, up for sale is an Xray M18 Roller. It was used very lightly and briefly(less than 10 times, indoors). Its in excellent condition. It will come with ALL original manuals, tools, boxes, etc.

Extras include (These come with the car, they do not cost you extra):
-Atomic XR043 M18 Version II Motor Mount (Atomicmods.com, $25)
-Atomic XR048 M18 Durable Spur Gear Set 40T/42T/44T (Atomicmods.com, $15)
-Atomic XR037 M18 Option Spring Set (Atomicmods.com, $10)
-Complete Xray M18 mounting hardware set ($10), [Its a full set of the kit's screws, bolts, o-rings and what not]
-Hitec HS-82MG Micro Metal Gear servo ($20)
-DuraTrax 6C 7.2V 1600mAh NiMH Stick battery ($20) + Soldered TRX connector. I can exclude the battery if you want.

Asking $145 shipped via USPS
US & Paypal only please