VXR Li-Po battery
#1
VXR Li-Po battery
Do I have to use the regulator in order to use the Li-Po reciver battery?
(LVR-1000) 1A Low Dropout Regulator or (LVR-5000) 5A Switching Regulator (6.7V) for Li-Po RX packs ?
Is the 5A one ONLY for using on spektrum and PCM? or it can still be using on other brand, ie. KO or use of 1/12?
Thanks
(LVR-1000) 1A Low Dropout Regulator or (LVR-5000) 5A Switching Regulator (6.7V) for Li-Po RX packs ?
Is the 5A one ONLY for using on spektrum and PCM? or it can still be using on other brand, ie. KO or use of 1/12?
Thanks
#2
the regulator you need cause your rcvr won't take over 6.0 volts. plus you need it to tell you yourbatt is low voltage. be safe and use it.
#3
thanks a lot.
then 5A or 1A?
then 5A or 1A?
#4
Tech Elite
iTrader: (9)
Originally Posted by Miu Miu
thanks a lot.
then 5A or 1A?
then 5A or 1A?
I would use this....
http://www2.towerhobbies.com/cgi-bin...?&I=LXJJF6&P=7
It does the job perfect.
I use the VXR receiver pack in my Jammin CRT with a regulator...Works flawlessly.
Hope that helps.
-Shookie <><