First F201....
12-14-2005, 08:38 AM
#17
F201ST1: kit …………MSRP $ 50.00
Ray this is the lower chassis part that you need to replace only your lower plastic from Tamiya. This is the easiest conversion from plastic to Carbon.
I recommend full carbon upper and lower as torsional stiffness gets alot better. Either way the nice part of adding the MLP lower is you can drill the lower arms for droop screws. You still need to make a small carbon piece for the front but it takes about 5 mins and some scrap Carbon.
Ray this is the lower chassis part that you need to replace only your lower plastic from Tamiya. This is the easiest conversion from plastic to Carbon.
I recommend full carbon upper and lower as torsional stiffness gets alot better. Either way the nice part of adding the MLP lower is you can drill the lower arms for droop screws. You still need to make a small carbon piece for the front but it takes about 5 mins and some scrap Carbon.
12-14-2005, 12:46 PM
#19
All of our chassis and parts are listed under MLP hopups parts @ MLP F1 logo red black and white making a lil better ok
We do offer drilled lower arms for droop screws as well.
And are awaiting Aluminum ones as well.
check it out!!
We do offer drilled lower arms for droop screws as well.
And are awaiting Aluminum ones as well.
check it out!!
Last edited by Marty Peterson; 12-14-2005 at 04:36 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
