R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 10-09-2006, 09:02 AM   #181
Tech Addict
 
bizkit1's Avatar
 
Join Date: May 2006
Posts: 743
Trader Rating: 27 (100%+)
Default

Quote:
Originally Posted by creamsodauk
any idea wher from??? im in the uk and have ebay etc?? can you buy the whole set ie the drive cups and so on??
The only thing the book say is: M21(inner cup) M22(outer cup) M23(axle)
I tried looking on Tamiya website and it doesn't have a hop-up listing for the axles or I'm overlooking it.

George
bizkit1 is offline   Reply With Quote
Old 10-09-2006, 11:17 AM   #182
Tech Adept
 
Join Date: Jun 2006
Location: Croydon/ London
Posts: 182
Exclamation

cheers well i will ask around!!

i just installed a 15 turn in my car as i thought a 13 was too low and the motor only cost me 12 and a 13 was 35

So all goes in sweet as a nut until!!!!!! i got it moving. i ran the motor on low speed for a min or 2 and then eased it up and it goes but when it reaches to end i get a real nasty cracky crunch sound

i think its the plastic drive shaft bending under the speed?? i have a gpm metal one coming tomoz so time will tell but is their anything else this could be??
creamsodauk is offline   Reply With Quote
Old 10-10-2006, 05:03 AM   #183
Tech Adept
 
Join Date: Jun 2006
Location: Croydon/ London
Posts: 182
Talking

ok !!!

ive recieved and installed my new GPM hop-ups!!!

So far installed:
Ball diff
Alloy drive shaft
Alloy front lower arms
Alloy rear lower arms
Alloy steering assembly
Turnbuckles
Alloy Front knuckles
Alloy rear knuckles
Gp 3000 battery
15x2 motor
Heatsink (in blue if anyone has a red to trade let me know)
Mtroniks forward only 11 turn limit esc

What next??? any ideas on other worth while hop-ups??

Oh and its got a lambo shell but im after a new, more moddified car look, like a supra in red or black or silver
Attached Thumbnails
TT-01 Forum-close-up.jpg   TT-01 Forum-over-view.jpg   TT-01 Forum-underside.jpg  

Last edited by creamsodauk; 10-10-2006 at 05:25 AM.
creamsodauk is offline   Reply With Quote
Old 10-10-2006, 06:49 AM   #184
Tech Master
 
nikkiesteban's Avatar
 
Join Date: Apr 2005
Posts: 1,649
Trader Rating: 5 (100%+)
Send a message via Yahoo to nikkiesteban
Default

Quote:
Originally Posted by creamsodauk
ok !!!

ive recieved and installed my new GPM hop-ups!!!

So far installed:
Ball diff
Alloy drive shaft
Alloy front lower arms
Alloy rear lower arms
Alloy steering assembly
Turnbuckles
Alloy Front knuckles
Alloy rear knuckles
Gp 3000 battery
15x2 motor
Heatsink (in blue if anyone has a red to trade let me know)
Mtroniks forward only 11 turn limit esc

What next??? any ideas on other worth while hop-ups??

Oh and its got a lambo shell but im after a new, more moddified car look, like a supra in red or black or silver
-install oiled shocks for better suspension, trf shocks are very good..
-get toe-in at the rear for stable & better running in stretch..
nikkiesteban is offline   Reply With Quote
Old 10-10-2006, 09:25 AM   #185
Tech Adept
 
Join Date: Jun 2006
Location: Croydon/ London
Posts: 182
Talking

he trf shocks u say hummm they wer on my list all though i love the looks of the red gpm alloy shocks jus to match lol!!

but i will def look into that....

toe in at the rear does that mean i need to get the adjustable upper arms?? as ive already got the alloy lower arm and ive got an alloy knuckle
creamsodauk is offline   Reply With Quote
Old 10-10-2006, 09:40 AM   #186
Tech Regular
 
asil's Avatar
 
Join Date: Sep 2005
Location: Istanbul, TURKEY
Posts: 281
Send a message via MSN to asil
Default

Quote:
Originally Posted by creamsodauk
he trf shocks u say hummm they wer on my list all though i love the looks of the red gpm alloy shocks jus to match lol!!

but i will def look into that....

toe in at the rear does that mean i need to get the adjustable upper arms?? as ive already got the alloy lower arm and ive got an alloy knuckle
rear toe-in can be changed by changing rear uprights. TT-01R kit has seperate rear uprights for toe-in but I don't know the case for TT-01..
asil is offline   Reply With Quote
Old 10-10-2006, 10:27 AM   #187
Tech Master
 
gijoe64's Avatar
 
Join Date: Apr 2003
Location: Corona, Ca
Posts: 1,406
Trader Rating: 25 (100%+)
Default

Quote:
Originally Posted by gijoe64
I am putting my tt01 up for sale, never run my son got a TAo5 it will include the Novak 4300 Brushless motor and esc. This car is loaded with hopups the only thing it needs is the Fr one-way. if interested e-mail me a gijoe1964@Insightbb.com.
Check it out TT-01 Forum
gijoe64 is offline   Reply With Quote
Old 10-10-2006, 06:40 PM   #188
Tech Regular
 
rays_tt's Avatar
 
Join Date: Apr 2005
Location: Melbourne
Posts: 483
Trader Rating: 26 (100%+)
Default

You can get toe-in rear uprights for the TT-01 in either plastic or alloy from Tamiya, prices differance is huge tho.

Since you havent got the upper alloy arms yet, I suggest getting the adjustable upper arms, so you can have camber.
__________________
www.melbRC.org
rays_tt is offline   Reply With Quote
Old 10-10-2006, 06:59 PM   #189
Tech Fanatic
 
rayman's Avatar
 
Join Date: Apr 2004
Location: Catch me if you can!
Posts: 741
Default

This thread is up so I'll post my current experiment

TT01r rallyweapon with dfo2 tires. Jumping capability unknown.
rayman is offline   Reply With Quote
Old 10-11-2006, 07:17 AM   #190
Tech Adept
 
Join Date: Jun 2006
Location: Croydon/ London
Posts: 182
Default

i will look into the upper adjustable arms altho dont they cause the dog bones to slip out??

more to the point what shell is that on the rally car??? i thenk the would look sweet sitting low with some bling tires!!!

where did u get it??
creamsodauk is offline   Reply With Quote
Old 10-11-2006, 05:48 PM   #191
Tech Fanatic
 
rayman's Avatar
 
Join Date: Apr 2004
Location: Catch me if you can!
Posts: 741
Default

Quote:
Originally Posted by creamsodauk
i will look into the upper adjustable arms altho dont they cause the dog bones to slip out??

more to the point what shell is that on the rally car??? i thenk the would look sweet sitting low with some bling tires!!!

where did u get it??
That's a tamiya m01 body I had lying around. The wheelbase is off so some trimming is necessary.
rayman is offline   Reply With Quote
Old 10-11-2006, 08:40 PM   #192
Registered User
 
UltegraSTI's Avatar
 
Join Date: Jul 2005
Posts: 7,171
Trader Rating: 20 (100%+)
Default

few pages back, some1 mentioned droop on the new lower arms. do the new lower arms (Dspec) have droop control???

-ult
UltegraSTI is offline   Reply With Quote
Old 10-19-2006, 05:47 PM   #193
Tech Initiate
 
Join Date: Oct 2006
Posts: 40
Trader Rating: 1 (100%+)
Default FXX TT01

Tower list this kit as having CVA shocks and full bearings:
http://www2.towerhobbies.com/cgi-bin...?&I=LXNUD8&P=7
Is this true? Getting ready to order one, but need to know if I need to order shocks and bearings.
Thanks
rslca is offline   Reply With Quote
Old 10-19-2006, 07:01 PM   #194
Tech Regular
 
flying G.E.O.'s Avatar
 
Join Date: Oct 2006
Location: Flight Academy
Posts: 404
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by ultegrasti
few pages back, some1 mentioned droop on the new lower arms. do the new lower arms (Dspec) have droop control???

-ult
yes they do. they're the same as the tt01r lower arms.
__________________
www.3dgallery.co.nr
flying G.E.O. is offline   Reply With Quote
Old 10-22-2006, 08:28 AM   #195
Tech Adept
 
Join Date: Jun 2006
Location: Croydon/ London
Posts: 182
Unhappy tt-01 please help me out

OK, unfortunately due to poor health and on going hospital costs ( i.e. train fairs and so on) and not having a job i am having to sell my be-loved TT01.

I have recently spent 48 alone in aloy hop ups including:
Alloy front and rear knuckles
Alloy front and rear lower arms
Alloy dive shaft
Ball diff

They are just the latest of a history of mods to the car, the rest of the hop ups are as follows:

Alloy steering assembly
Alloy turnbuckle (for steering assembly)
Ball bearings through out
Speed tuned gears (22/58 currently installed)
Adjustable Steering turn buckles
Alloy heatsink (for motor)

For the electronic i have moddified the car to race spec, for competetive racing. These include:
Acoms steering servo
15x2 Modified motor (run once)
11 turn limit, water proof esc
futaba 2 ch reciever
Acoms 2 ch controller
Yellow crystals

For the exterior i have purchased and installed:
Lamborgini shell (extra holes in the shell for diffrent car types)
Chrome rims with slicks (glued as they expand on straights and come off)

The following spares are also included:
Rear differential
Original rear knuckles
Original right side front knuckle (as i threaded the left)
Original lower arms (front and rear)
lots of srews and washers
Tyre pins
Original nylon bearings
Spare reciever (used but never by me)
Spare servo (again used but by me)

The following tools will be included:
Alloy wheels wrench
Adjustment spanner for steering turn buckles

The car has never been raced due to the build finishing as the wetather got bad, The car has been run inddors to test the new alloy parts and the motor. (and outside on a basket ball court, when the other motor was insalled)
The car shows signs of very little use and is in as new condition. And has been well greades with officail tamiya grease.

Sensible offers please!!

im after a quickish sale as my funds are extremely low, and im struggling to pay fairs and perscriptions as it is.

Their is my photo bucket account with pictures of the car:'
http://s86.photobucket.com/albums/k1...sc=3?sc=3?sc=3
creamsodauk is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM


Tags
drift


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 05:55 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0