creamsodauk

well in the 5 mins i have had since the last post i have nocked up a new chrome centre exit exhaust!!

what do you think???

i quiet like it

creamsodauk

Well i forgot to post the pic so here she is

in2deep

iTrader: (13)

this is my TT-01 and some of my other cars.

surrealmaterial

iTrader: (4)

thanks heaps mate...it worked!

creamsodauk

hi will this part fit my tt01?? i have the alloy steering set installed, and think i set of tie-rods would be better than the satndard plastic parts

cheers

Tamiya 4WD/FWD Touring & Rally Car Turnbuckle Tie-Rod Set, Part No's. 53191

creamsodauk

hi i just took my new built tt01 out for a drive and, i cant say im impressed

i have put a 22t pinion on with standard gearing and added my 19x2 motor, but it seems slower all round as compared with my tl01?? my tl seemed faster in acceleration and top speed(i was using a 19t pinion on my tl01 with standard gearing)

should i install my speed tuned gear that i have purchased or go back down to a 19t pinion as i dont think my motor is fast enough for these tuned gears and the 22t pinion??

any advice you can give me??

19t pinion with standard gears, or 22t pinion with speed tuned gears?? remembering that its running a 19x2 modified motor and a gp3000 battery

please help me

pininfarina

iTrader: (16)

maybe you should just change the motor...

I am using novak 5.5.R brushless with stock gear setup, 19/61..

and this thing really moves!

pininfarina

iTrader: (16)

picture of my ride...



very bright LEDs

mailboxck

iTrader: (9)

Buy the speed tuned gear set. It's a must.

The touring car turbucle set will not fit your tt01. There is a turnbucle set solely for the steering of the tt01 and an adjustable upper arm set as well.

creamsodauk

right my car decided to stop today!! i started to drive away car seemed fine, then stop!!! nothing

esc still lights up and you can see the lights changing indicating the car is recieving signals. but the motor wont spin. i put a stock motor in and away she goes, so why did my motor just stop??

could it need new brushes or somthing??

please help as i jus ordered a load of gpm parts (waiting for delivery) and i just installed a new esc to take a bigger motor.

p.s my esc is forward only and came with a resisitor to stop the esc going bang if it goes backwards from a crash as im still accelerating. is this a must to install or not??

hdsport82

Check to see if one of your brushes are hung up. Not making contact with the com.

creamsodauk

yep that was it the wires the brushs are attached to wer all tight and scrunched up so i un tightend them jus pulled them apart a little and the motor kicked in again!!!!

happy days lol

how long should a set of brushs last?? and do u think i should have mine changed for peace of mind??

oh and any ideas about the resistor on the motor for a forward only esc?? should i get it done??

creamsodauk

oh another thing!! will a set of tl01 dogbones fit in my tt01?? because the tl uses steel ones and the tt's are plastic with metal nibs??

bizkit1

iTrader: (27)

Just get a set of TT01R ones. They're the way to go.

creamsodauk

any idea wher from??? im in the uk and have ebay etc?? can you buy the whole set ie the drive cups and so on??