TT-01 Forum
#1726
Hello , Where do you all play ??
i playing tt01
i playing tt01
#1727
hey guys.
just curious, wat do you guys think bout my tto1
oh and i had that p7 ball issue too. replaced the ball. i was the one at that one past weekend i think stichy lent me a p7 ball," thanks sticthy you saved my day)
just curious, wat do you guys think bout my tto1
oh and i had that p7 ball issue too. replaced the ball. i was the one at that one past weekend i think stichy lent me a p7 ball," thanks sticthy you saved my day)
#1728
to those using the 3racing conversion kit, did the conversion eliminate the propeller shaft wobble?
thanks
thanks
#1729
Tech Rookie
which brushless?
hi all. i'm building up a tt-01r and needed help with which brushless system to get. i'm not gonna be racing this thing, just parking lot bashing. I've been doing some research and noticed that a lot of people are running the ezrun combo. I was originally gonna go with the novak havoc system, but had read all sorts of horror stories on this forum. I am looking for something comparable to a modified stock brushed motor (19t i believe). I've been told that the 13t brushless is equivalent. So which system should i get? the 13t ezrun combo or the 13.5t ezrun combo? OR if there is any other brushless systems you'd recommend, that'd be great. My budget is around 150. Thanks in advance!
Last edited by atrain62; 01-08-2010 at 05:31 PM.
#1731
Tech Initiate
get the 13.5t for sure, you'll wanna get the systems with .5 because they have full 540 rotors rather than 380. more torque. i am VERY happy with my system. hey mytt01, whats with the different tyres on each side?
i just got a castle sidewinder system 4600kv, very quick, but the brake and the drag brake are seriously poor, i don't have a PC, only mac, so i am unable to update it.
i just got a castle sidewinder system 4600kv, very quick, but the brake and the drag brake are seriously poor, i don't have a PC, only mac, so i am unable to update it.
#1732
get the 13.5t for sure, you'll wanna get the systems with .5 because they have full 540 rotors rather than 380. more torque. i am VERY happy with my system. hey mytt01, whats with the different tyres on each side?
i just got a castle sidewinder system 4600kv, very quick, but the brake and the drag brake are seriously poor, i don't have a PC, only mac, so i am unable to update it.
i just got a castle sidewinder system 4600kv, very quick, but the brake and the drag brake are seriously poor, i don't have a PC, only mac, so i am unable to update it.
#1733
Does anyone have a decent set-up for a TT01 type E ?
I just bought a TT01R type E and wanted a baseline set-up to start.
It will have a 27 turns motor.
Thanks
I just bought a TT01R type E and wanted a baseline set-up to start.
It will have a 27 turns motor.
Thanks
#1734
I have a question i just want to know if the 3racing m chassis makes the tt01 have a smaller wheel base?
#1735
#1736
Tech Initiate
#1737
#1738
Tech Champion
iTrader: (136)
Starteur - I ran my TT01E all summer in parking lot races with the 25/55 gear ratio, Tamiya yellow springs all around, HPI X-pattern pro compound tires, Tamiya plastic oil shocks ( I'll have to check my notes for the oil I used), the shock position in the front was the inside position, and the shock position in the rear was the outside position. It handled very well. The X-pattern pro's were great.
#1739
A question about LIPO conversion
A friend of mine suggests that I cut the "ribs" of the place where the battery would go (to flat it out).He says that the vibrations caused by those ribs could damage the battery. I have a normal 7,4 LIPO (not hardcase)
Do you think this is necessary?
A friend of mine suggests that I cut the "ribs" of the place where the battery would go (to flat it out).He says that the vibrations caused by those ribs could damage the battery. I have a normal 7,4 LIPO (not hardcase)
Do you think this is necessary?
#1740
Tech Fanatic
iTrader: (18)
A question about LIPO conversion
A friend of mine suggests that I cut the "ribs" of the place where the battery would go (to flat it out).He says that the vibrations caused by those ribs could damage the battery. I have a normal 7,4 LIPO (not hardcase)
Do you think this is necessary?
A friend of mine suggests that I cut the "ribs" of the place where the battery would go (to flat it out).He says that the vibrations caused by those ribs could damage the battery. I have a normal 7,4 LIPO (not hardcase)
Do you think this is necessary?