Bruhsless and minipack reciver
#1
Bruhsless and minipack reciver
Hello!
I have a Matrix ESC with a bruhsless motor in my 1/12.
my question is:
Can I use the minipack in the reciver with a bruhsless motor??
If this is possible, I have that disconnect the red wire from ESC to reciver?
Sorry for my English!!
Thanks
I have a Matrix ESC with a bruhsless motor in my 1/12.
my question is:
Can I use the minipack in the reciver with a bruhsless motor??
If this is possible, I have that disconnect the red wire from ESC to reciver?
Sorry for my English!!
Thanks
Last edited by Caza Roedores; 12-05-2005 at 01:12 PM.
#2
Nobodie know??
#3
You can use a receiver pack, no problems.
- use a 5-cell pack.
- connect it to any free slot of your receiver.
- no need to cut any wire, simply leave the speed-controls switch turned off.
Have fun, it works fantastic in 1/12.
- use a 5-cell pack.
- connect it to any free slot of your receiver.
- no need to cut any wire, simply leave the speed-controls switch turned off.
Have fun, it works fantastic in 1/12.
#4
Many thanks Reto!!
I tested it in some weeks in the canary islands...
Greetings from Spain!!!
------------------------------------------------------
Ivan Mula
I tested it in some weeks in the canary islands...
Greetings from Spain!!!
------------------------------------------------------
Ivan Mula