R/C Tech Live @ the 2005 US Indoor Championships
#647
The Evicerator
I wasn't missed???
#649
The Evicerator
A hunk-a hunk-a burnin' love?
#651
Tech Regular
No, they arent that fast. I think Dave ran a 7, not sure about Paul.
#652
Tech Adept
Bobby Flack
Bobby are you kidding? Why would you say such a thing.....
Paul lemieux ran the Cobalt 2 (tear-down and motor by True Speed) with the new brushes and compound, as well as Dave Johnson (4th), Ralph Burch (3rd and YOUR BOSS BOBBY), Matt Francis and Billy Easton
All in all....5 out of 10 in the Modified A......I would think it was a pretty good debut for their first race.....
Paul lemieux ran the Cobalt 2 (tear-down and motor by True Speed) with the new brushes and compound, as well as Dave Johnson (4th), Ralph Burch (3rd and YOUR BOSS BOBBY), Matt Francis and Billy Easton
All in all....5 out of 10 in the Modified A......I would think it was a pretty good debut for their first race.....
#654
Tech Adept
Bobby Flack
Bobby...if you want to quit Trinity that is your choice and I wish you the best with DC but I dont think you need to say stuff like this that you know is not true....
I dont think horsepower was your problem at Cleveland....it was just a bad race for you that weekend. Thats all.....
I dont think horsepower was your problem at Cleveland....it was just a bad race for you that weekend. Thats all.....
#655
Ernie, I think he was saying that they aren't that fast to make a 10 turn look like a 7......no motor is.....doesn't matter who makes it. I don't think he was saying the motor itself isn't fast.
Paul's stuff was a rocket, as was Ralph's......didn't pay much attention to the others, as I was watching Dumas try to reel in Paulie.........
The new motor performed well....the endbell looks much better with it colored in the gunmetal gray.....the new brushes seems to be pretty bitchin, very little wear on the comm...
Can't wait to get some.....tell dave to put that new brushhood in my shock endbells like we talked about! He thought I was BSing him when I told him!
Later EddieO
Paul's stuff was a rocket, as was Ralph's......didn't pay much attention to the others, as I was watching Dumas try to reel in Paulie.........
The new motor performed well....the endbell looks much better with it colored in the gunmetal gray.....the new brushes seems to be pretty bitchin, very little wear on the comm...
Can't wait to get some.....tell dave to put that new brushhood in my shock endbells like we talked about! He thought I was BSing him when I told him!
Later EddieO
#656
Tech Regular
ERNIE PROVETTI
I didnt mean to imply that the motors were not fast, just that they weren't outrunning the entire field with 10 turns. Sorry it came off that way. The motors ran great for me all weekend, and like you said I just had a bad weekend. Obviously the motors had to have run good to be able to have 5 in the a-main. Again, i'm sorry that is how it came off.
Last edited by Bobby Flack; 12-01-2005 at 03:25 PM.
#657
test
#659
Tech Elite
iTrader: (21)
Originally Posted by T. Hodge
Thanks....the car was really good.
Here is what I ran
Front suspension
Springs .020 with CRC blue lube on the king pin.
.5mm of uptravel
3mm ride height
Caster shims-Middle-Used 10 degree aluminum mounts.
CRC's new Delrin Upper arm (4277) and steering blocks (4275)
JACO DS Double Pinks with outer sidewall glued.42mm in size. Sauced 1/2 front tire.
Mid
Ride height- 3.5mm
Shock-Oil 30wt Team Losi with Red Spring
Batteries forward
Rear
Rear Tire JACO DS Double Pink rears - 45 mm
Damper Tube Fluid CRC White
Roll Center CRC Low roll centre
Ride Height 3.5 mm
Tire Dressing Full width soak
Side Springs White
Protoform Speed Body
Spur 100
Pinion 29
Motor Orion 10x1
Battery GP3700
Here is what I ran
Front suspension
Springs .020 with CRC blue lube on the king pin.
.5mm of uptravel
3mm ride height
Caster shims-Middle-Used 10 degree aluminum mounts.
CRC's new Delrin Upper arm (4277) and steering blocks (4275)
JACO DS Double Pinks with outer sidewall glued.42mm in size. Sauced 1/2 front tire.
Mid
Ride height- 3.5mm
Shock-Oil 30wt Team Losi with Red Spring
Batteries forward
Rear
Rear Tire JACO DS Double Pink rears - 45 mm
Damper Tube Fluid CRC White
Roll Center CRC Low roll centre
Ride Height 3.5 mm
Tire Dressing Full width soak
Side Springs White
Protoform Speed Body
Spur 100
Pinion 29
Motor Orion 10x1
Battery GP3700
did you wire the voltage regulator and li-po pack together and then just plug the whole deal into your reciever each time? or did you wire in a switch somwhere? i got the same pack and regulator sitting on my desk at work and im just wondering what you did?
what did you charge the pack at and how long before you had to recharge it, i have the VXR 2-cell 240mah pack too...
#660
I wanted to thank everyone for the nice words.
I wanted to take a minute and thank all my sponsors.
CRC - the v3.2r is a great car and the Track magnet high roller tires were awesome.
Hurrican Batteries - The IB3800's were great. Sticks like I've never seen before.
Parma/PSE - Bodies & Paint dialed as usual.
KO Propo - the VFS 1 speedo is great in stock.
Genuine Inovations - Great products.
and a Special thanks to Latif and Trinity for all the help with the handout motors. Latif - you can build some huge pull. Good work.
Finally thanks to Ian Ruggles who has done a fantastic job at announcing, and Eli Ezrow for growing your beard.
I had the best weekend at Cleveland ever, after all these years.
I wanted to take a minute and thank all my sponsors.
CRC - the v3.2r is a great car and the Track magnet high roller tires were awesome.
Hurrican Batteries - The IB3800's were great. Sticks like I've never seen before.
Parma/PSE - Bodies & Paint dialed as usual.
KO Propo - the VFS 1 speedo is great in stock.
Genuine Inovations - Great products.
and a Special thanks to Latif and Trinity for all the help with the handout motors. Latif - you can build some huge pull. Good work.
Finally thanks to Ian Ruggles who has done a fantastic job at announcing, and Eli Ezrow for growing your beard.
I had the best weekend at Cleveland ever, after all these years.