Themelisfactor1

iTrader: (1)

It's a bit stiffer than the destiny chassis and it's also narrower to prevent rubbing.

bertrandsv87

iTrader: (2)

Very good results out of this chassis so far....

phatboislim

iTrader: (26)

the roche site carries replacement parts now as well just an FYI

phatboislim

iTrader: (26)

Ok, i'm about 2 meaningful races in with this car and 5 total race/practice days and the consistency in laps that i'm putting down with this car is mind blowing for me. i'm loving the car itself. I dont know if it's an elevation of my driving finally or the car being that awesome, but i'm loving it. hope the parts support will improve with it, i'd like to stick with it.

antlockyer

I've just bought a Destiny. My first real attempt at touring cars. I had a Yokomo back in the 90s but only used it a couple of times and never really had a clue what I was doing. I've been racing 12th scale for about a year so have a little more knowledge now but not much

phatboislim

iTrader: (26)

where are yall running your rear sway bar links? to the outer or inner balls on the rear arms on high grip carpet?

also anyone hear of a stiffer carbon chassis for destiny?

antlockyer

Guys any clue on what way round the centre pully goes. the instructions are hard to work out there (and it seems to fit perfectly well either way).

Thanks

EDIT
If this is the right way round I've done it correctly.

http://www.redrc.net/wp-content/uplo...inyRX10S-4.jpg

Mach10_shooter

iTrader: (40)

Per the instructions...

antlockyer

That is not obvious to me at all.

Mach10_shooter

iTrader: (40)

It says to install short belt on the screw head side of the pulley not the side with the threads... You can only install it one direction!

antlockyer

Thank you, I just cant see it on that picture at all for some reason.

phatboislim

iTrader: (26)

there's a lack of setups for this car especially on carpet on the petit website. i'm far from the fastest, but i put up my setup so others can have something to look to. anyone else going to do the same?

Mach10_shooter

iTrader: (40)

I have a very good light to medium grip gray carpet setup I'll post soon.

Mach10_shooter

iTrader: (40)

Check this out! Bad timing with the factory Destiny weight coming out but this one is only 35g. The Destiny part is 50g, far too heavy if you are running aluminum chassis. Pricing is comparable at around $20 Questions and orders can be placed if you contact [email protected]

There are other items in the works for the Destiny and I'll post those as soon as information is available.

bertrandsv87

iTrader: (2)

Great....