phatboislim

iTrader: (26)

random...but those the gear diff is interchangeable both front and rear right? it's not a different part number?

http://www.destinyracing.jp/index.ph...product_id=104

RBLove

iTrader: (90)

Yes - the diffs are internchangeable front and rear.

phatboislim

iTrader: (26)

cool thanks

phatboislim

iTrader: (26)

is there any brands that have interchangeable bladders with this chassis' shocks? i really dont want to drill a hole in the caps just to get rebound when i was able to do that with my TC7 shocks with a simple bladder swap

LloydLoar

iTrader: (20)

Yokomo bladders will fit well.

hobbs

iTrader: (32)

What bladder you use for TC7 shocks??

phatboislim

iTrader: (26)

i tried those in my TC7 and they didnt allow me to set my rebound either

i used TC6.1 bladders

RBLove

iTrader: (90)

phatboislim, what are you trying to accomplish? Full rebound, partial, or none? I only race on carpet and typically build my shocks with little to no rebound. I have been able to accomplish with the kit bladders. It took some time, but was able to do it. Building them with rebound I found very easy.

phatboislim

iTrader: (26)

i'm trying to get zero to little rebound, but when i go to try to set it as such the shaft always extends out once i get the cap closed. i'd like to see the method (youtube/some kind of video) yall do in order to get zero/little rebound with the kit bladders because i couldnt get it. i sat on my couch working at my table trying time and again with no ability to get them built as such.

i race on the new black crc carpet

zaraz

iTrader: (38)

just drill the cap

RBLove

iTrader: (90)

Drilling the cap does work, but you need to keep the shaft moved in while screwing on the cap extremely slow. Alexander Hagberg has a youtube video on building Xray shocks with zero rebound and they are basically the same thing. I will see if I can find it.

phatboislim

iTrader: (26)

To be honest after being able to do shocks with the rebound i want without drilling i really dont want to drill my shock caps.

I'll look for the video too thanks for a direction to at least look

zaraz

iTrader: (38)

if xray caps are the same then xray sell the option caps with the holes already in them which will get you 0 rebound, I have tried building without the hole in the cap and never got 0 rebound, good luck hope it works for you.

phatboislim

iTrader: (26)

Found alexander vid...followed it and reduced my rebound but not by much... from full rebound to maybe 30- 40%

Racermac73

iTrader: (3)

Your putting to much thought into this.. push the shaft 75% in, shove the bladder in until it pushes out fluid and seals itself to the shock body, screw the cap on.. all this other nonsense is just brainfukin it and wasting your time.