Tamiya TB-Evolution III
#5851
Tech Fanatic
I have been running a shim in each diff case(front, and rear), mostly for crash protection at SoCal(yes, even in Sportsman Stock there is some crashing). It has not seemed to make my drivetrain bind at all...
It is my understanding that the longer shaft just seats into the pinion gear a little bit better. It is not pushing the pinion into the case any harder, it just has more of a surface contact with the pinion. Thus, it should not cause any binding, and the inside of the pinion will/should not strip out.
I think I am learning the EVOIII REAL well now! *claps**pats on own back* hahahaha
It is my understanding that the longer shaft just seats into the pinion gear a little bit better. It is not pushing the pinion into the case any harder, it just has more of a surface contact with the pinion. Thus, it should not cause any binding, and the inside of the pinion will/should not strip out.
I think I am learning the EVOIII REAL well now! *claps**pats on own back* hahahaha
#5852
Originally posted by V12
Got my lightweight shaft today. Maybe trying this weekend.
Do I have to change the shims with the oneway using this shaft or keeping the same shims?
What if using the Square aluminium gearbox?
Got my lightweight shaft today. Maybe trying this weekend.
Do I have to change the shims with the oneway using this shaft or keeping the same shims?
What if using the Square aluminium gearbox?
#5853
Originally posted by Bubblestc3
I have been running a shim in each diff case(front, and rear), mostly for crash protection at SoCal(yes, even in Sportsman Stock there is some crashing). It has not seemed to make my drivetrain bind at all...
It is my understanding that the longer shaft just seats into the pinion gear a little bit better. It is not pushing the pinion into the case any harder, it just has more of a surface contact with the pinion. Thus, it should not cause any binding, and the inside of the pinion will/should not strip out.
I think I am learning the EVOIII REAL well now! *claps**pats on own back* hahahaha
I have been running a shim in each diff case(front, and rear), mostly for crash protection at SoCal(yes, even in Sportsman Stock there is some crashing). It has not seemed to make my drivetrain bind at all...
It is my understanding that the longer shaft just seats into the pinion gear a little bit better. It is not pushing the pinion into the case any harder, it just has more of a surface contact with the pinion. Thus, it should not cause any binding, and the inside of the pinion will/should not strip out.
I think I am learning the EVOIII REAL well now! *claps**pats on own back* hahahaha
#5854
Originally posted by markp27
Did you order it from Asia?
Did you order it from Asia?
#5855
Mark
But maybe I´m ordering some stuff from Asia in the next two weeks. I´m waiting for a friend maybe he needs something also. As costs are a little high it´s better ordering more stuff. Do you need anything? If so please send me PM regarding this.
But maybe I´m ordering some stuff from Asia in the next two weeks. I´m waiting for a friend maybe he needs something also. As costs are a little high it´s better ordering more stuff. Do you need anything? If so please send me PM regarding this.
#5856
Tech Fanatic
Originally posted by jeffreylin
Hey Bubbles, who are you teaming up with for the enduro? Will you be going to Tamiya and SoCal this Saturday?
Hey Bubbles, who are you teaming up with for the enduro? Will you be going to Tamiya and SoCal this Saturday?
So far, the "SoCal teams" are...
SoCal Team #1(aka. the Roof Riders)(say this name fast, and it sounds like Ruff Riders, something in music I think)
1. Erik
2. Me
3. Jason E.
4. Alex Navrette(sp?)
SoCal Team #2(aka. team Really Extra Super Fast Racing)
1. Mark DeRosa
2. Minh Ngyuen
3. Chad Miller
4. TBA(I might have forgotten who is thier fourth member...)
As for this weekend, Tamiya Track for sure, and 95% sure of going to SoCal afterwards. You get REALLY tired after both though .
I have to talk to you, I'll send you a PM after school today...
Chris
#5857
Originally posted by Bubblestc3
Hey Jeff, what's up?
So far, the "SoCal teams" are...
SoCal Team #1(aka. the Roof Riders)(say this name fast, and it sounds like Ruff Riders, something in music I think)
1. Erik
2. Me
3. Jason E.
4. Alex Navrette(sp?)
SoCal Team #2(aka. team Really Extra Super Fast Racing)
1. Mark DeRosa
2. Minh Ngyuen
3. Chad Miller
4. TBA(I might have forgotten who is thier fourth member...)
As for this weekend, Tamiya Track for sure, and 95% sure of going to SoCal afterwards. You get REALLY tired after both though .
I have to talk to you, I'll send you a PM after school today...
Chris
Hey Jeff, what's up?
So far, the "SoCal teams" are...
SoCal Team #1(aka. the Roof Riders)(say this name fast, and it sounds like Ruff Riders, something in music I think)
1. Erik
2. Me
3. Jason E.
4. Alex Navrette(sp?)
SoCal Team #2(aka. team Really Extra Super Fast Racing)
1. Mark DeRosa
2. Minh Ngyuen
3. Chad Miller
4. TBA(I might have forgotten who is thier fourth member...)
As for this weekend, Tamiya Track for sure, and 95% sure of going to SoCal afterwards. You get REALLY tired after both though .
I have to talk to you, I'll send you a PM after school today...
Chris
#5859
Originally posted by Hebiki
jeff
you want to jump into an enduro team? we may have some room if you wanna jump in. or if you just wanna help. PM Me..and we'll chat.
- chris
jeff
you want to jump into an enduro team? we may have some room if you wanna jump in. or if you just wanna help. PM Me..and we'll chat.
- chris
#5861
Tech Regular
Rick mate, or anyone, have you had chance to compare the Lightweight evo3 prop and the team bombers carbon prop yet?
thanks
Tarnjit
thanks
Tarnjit
#5862
Tech Fanatic
iTrader: (6)
jurgen one way
Just a couple of pics of the Jurgen one way and his spool. Just installed tonight along with the new lightweight shaft. Too bad it doesn't come in red! Now I have a gunmetal shaft and E block!!
Oh well, if it solves the stripping problems, I'll be happy!
vic
Oh well, if it solves the stripping problems, I'll be happy!
vic
#5864
Re: jurgen one way
Originally posted by hierog
Just a couple of pics of the Jurgen one way and his spool. Just installed tonight along with the new lightweight shaft. Too bad it doesn't come in red! Now I have a gunmetal shaft and E block!!
Oh well, if it solves the stripping problems, I'll be happy!
vic
Just a couple of pics of the Jurgen one way and his spool. Just installed tonight along with the new lightweight shaft. Too bad it doesn't come in red! Now I have a gunmetal shaft and E block!!
Oh well, if it solves the stripping problems, I'll be happy!
vic
I never heard any bad of these parts.
Tomorrow I also will use the lightweight shaft. But I don´t have a red car. My EVO3 is titaniumgrey and blue.
#5865
Tech Master
iTrader: (28)
Re: jurgen one way
Originally posted by hierog
Just a couple of pics of the Jurgen one way and his spool. Just installed tonight along with the new lightweight shaft. Too bad it doesn't come in red! Now I have a gunmetal shaft and E block!!
Oh well, if it solves the stripping problems, I'll be happy!
vic
Just a couple of pics of the Jurgen one way and his spool. Just installed tonight along with the new lightweight shaft. Too bad it doesn't come in red! Now I have a gunmetal shaft and E block!!
Oh well, if it solves the stripping problems, I'll be happy!
vic
They look to be great quality, and sadly I'm a bit under caffinated this morning to review all the threads to find the contact info.
Your help is appreciated
John