Tamiya TB-Evolution III
11-22-2003, 10:12 AM
#4906
Tech Apprentice
And one more.
11-22-2003, 10:15 AM
#4907
Re: bevel gear?!?!
Originally posted by jeffreylin
With all the talk about the front one-way I thought for sure it stripped after the front started slipping. This morning I opened up the gearbox and found out it's the shaft notch of the bevel gear that stripped! Any suggestions on a fix other than keep replacing them (only 2 spares came with the kit...) THanks, Jeff
With all the talk about the front one-way I thought for sure it stripped after the front started slipping. This morning I opened up the gearbox and found out it's the shaft notch of the bevel gear that stripped! Any suggestions on a fix other than keep replacing them (only 2 spares came with the kit...) THanks, Jeff
11-22-2003, 10:22 AM
#4909
Re: Re: bevel gear?!?!
Originally posted by BigDogRacing
Drill it and pin it. You must accurately mark the driveshaft to be sure the pinion is in the correct place.
Drill it and pin it. You must accurately mark the driveshaft to be sure the pinion is in the correct place.
11-22-2003, 10:30 AM
#4910
Re: Re: Re: bevel gear?!?!
Originally posted by jeffreylin
Really? I don't know if I am capable of that kind of workmanship lol. Is there like a titanium or aluminum aftermarket bevel gear out there or is that a bad idea? thanks.
Really? I don't know if I am capable of that kind of workmanship lol. Is there like a titanium or aluminum aftermarket bevel gear out there or is that a bad idea? thanks.
11-22-2003, 10:43 AM
#4911
Re: Re: Re: Re: bevel gear?!?!
Originally posted by Randman
Adding titanium or aluminum will just make that already weak 1 way gear shred twice as fast...
Adding titanium or aluminum will just make that already weak 1 way gear shred twice as fast...
11-22-2003, 11:50 AM
#4912
Re: Re: Re: Re: Re: bevel gear?!?!
Originally posted by jeffreylin
Yeah you are probably right there. I also thought about replacing the one-way ring gear to a metal one as well but I guess the stress will now be transfered to the rear? But since the rear has a ball diff that's probably okay? Just wondering...
Yeah you are probably right there. I also thought about replacing the one-way ring gear to a metal one as well but I guess the stress will now be transfered to the rear? But since the rear has a ball diff that's probably okay? Just wondering...
11-22-2003, 03:23 PM
#4913
Tech Regular
guys
Carbon 1 piece prop shaft
or tech raceing 3 piece prop shaft
What would u recommend i get?
cheers
Carbon 1 piece prop shaft
or tech raceing 3 piece prop shaft
What would u recommend i get?
cheers
11-22-2003, 07:48 PM
#4914
Tech Apprentice
Originally posted by Randman
I've checked out those antenna mounts, but never tried one, have you ever run into interfierence problems?
I've checked out those antenna mounts, but never tried one, have you ever run into interfierence problems?
11-22-2003, 09:35 PM
#4916
Originally posted by ARC MotorSports
Nope. I race with a Futaba 3PDF and extend the antenna on the radio about 2/3 of the way, the car is setup as pictured. I have no glitching problems. Nice and tidy too.
Nope. I race with a Futaba 3PDF and extend the antenna on the radio about 2/3 of the way, the car is setup as pictured. I have no glitching problems. Nice and tidy too.
11-23-2003, 09:24 AM
#4920
Tech Regular
anyone try the tc3 gear. how dose it work? is the drive train free? any info would be helpful thanks