R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Like Tree9Likes
Reply
 
Thread Tools Search this Thread
Old 08-28-2015, 01:21 PM   #1
Tech Fanatic
 
Join Date: Nov 2003
Location: CRC Raceway
Posts: 983
Trader Rating: 1 (100%+)
Default The Official World GT-R Rules and Discussion

World GT-R Rules - Updated 9/2

- Chassis – 200mm pan car chassis (WGT car)

-Minimum Ride Height – 5mm

-Minimum Weight – 1025 grams

-Maximum Track Width - 200mm

- Tire and Wheel Rules – For the 2015-2016 season, Team CRC GTR rims will be the only rims allowed (Part #2310). The only front tires that will be allowed are Team CRC RT-1 (Part#2311), Team CRC Mounted RT-1 (Part#2314), and TCS fronts (Part#1031). The only rear tires that will be allowed are Team CRC RT-1 (Part#2312), Team CRC Mounted RT-1 (Part#2316), and TCS (Part#1032). Tires can be mounted “F1/Nascar” or “GT” style. If mounted “GT” style, the inner lip can be trimmed for clearance, however the molded letters (either CRC or TCS) must not be removed. The is no performance advantage to either mounting style, it is just for scale appearance. Stock inserts only. No Modifying inserts or “double stuffing” of inserts will be allowed.

-Battery – ROAR approved 1 cell (3.7v) hard case lipo. Voltage limit to be set by track (4.20-4.22)

-Motor – Any ROAR approved 17.5 turn brushless motor (Smaller tracks are encouraged to use 21.5)

-Rotor – ROAR approved tuning rotors are allowed

-Speed Control – Any ROAR approved spec class (blinky) speed control in “blinky” mode. NO RECEIVER PACKS. You may use a specific 1 cell speed control, or a two cell speed control with an external booster. Stock 2 or 4 cap banks that come with the ESC's only. There will be a limit of 10,000 micro farad on cap banks.

-Bodies – Bodies must be cut on the mold lines. No excessive cutting or lowering of the body is permitted. No lightening of the body is permitted. Wings and spoilers that are included with the body kits are ok if cut on one of the mold lines (if multiple mold lines are present). No additional aerodynamic aids are allowed. Backs of the bodies (including rear bumpers) are to be left in. No bodies that were designed for pan cars, no GTP, Daytona Prototype, IMSA, or bodies that look like 1/12th or 1/8th on road bodies with an integrated rear wing. Tires cannot stick outside the body.

-Race Length- Have fun with this. If 5 minute qualifiers and 5 minute mains fit in your race program, do that. If you want to do 8 minute races, do that. If you want to do shorter qualifiers and longer mains, do that. We have run 15 minutes with ease. Work with your race director to fit into the program. Run time and traction are not an issue for longer races.

-Fun- 100% Mandatory!

Approved Body list:

- Any body currently on the USVTA approved body list
- Protoform 1543-00 Cadillac ATS-V.R
- Protoform 1544-30 Chevy Camaro Z28
- Protoform 1548-30 Cadillac ATS-V.R (200mm version)
- Protoform 1532-30 Chevy Camaro ZL1
- Protoform 1542-30 PFM-10
- Protoform 1549-30 Ford GT
- McAllister 307 MX Stang GT
- McAllister 233 Lexus IS
- McAllister 211 Jaguar XKR
- McAllister 282 Mercedes DTM
- McAllister 311 WGT-R LeMans C6
- HPI Racing 103886 Nissan 350z Hankook
- HPI Racing 106108 2011 Ford Mustang
- HPI Racing 106940 2011 Scion TC
- HPI Racing 108064 Scion FR-S
- HPI Racing 108370 2012 Porsche 911 GT3
- HPI Racing 109385 Nissan S13
- HPI Racing 109930 1969 Ford Mustang
- HPI Racing 17502 De Tomaso Pantera
- HPI Racing 17503 Chevrolet Corvette C6
- HPI Racing 17504 Ford Mustang GT-R
- HPI Racing 17505 Subaru Impreza WRC
- HPI Racing 17506 2004 Honda S2000
- HPI Racing 17515 Nissan Skyline R32 GT-R
- HPI Racing 17518 Nissan 350z Greddy
- HPI Racing 17524 Vertex Ridge Toyota Soarer
- HPI Racing 17525 Prova HPI Impreza
- HPI Racing 17526 1967 Chevrolet Corvette
- HPI Racing 17527 Porsche 911 Turbo
- HPI Racing 17530 Nissan Silvia
- HPI Racing 17537 Saleen Limited Edition
- HPI Racing 17538 Nissan GT-R (R35)
- HPI Racing 17539 Toyota Supra Aero
- HPI Racing 17540 BMW M3 E30
- HPI Racing 17541 Porsche 911 GT3 RS
- HPI Racing 17542 Lexus IS F
- HPI Racing 17543 2010 Chevy Caramo
- HPI Racing 17544 Alfa Romeo 8C
- HPI Racing 17548 BMW M3 GT2
- HPI Racing 30717 Weld JZX100 Toyota Mark II
- HPI Racing 30721 T&E Vertex Ridge JZX100 Toyota
- HPI Racing 30727 Weld X HPI Racing JZX100 Toyota
- HPI Racing 30730 Lexus LS430
- HPI Racing 30732 Lexus LS460
- HPI Racing 7038 Porsche 911 GT1
- HPI Racing 7039 Chevrolet Corvette
- HPI Racing 7049 Subaru Impreza WRC ‘98
- HPI Racing 7409 Nissan Skyline R34 25GT
- HPI Racing 7418 Porsche 911 GT3
- HPI Racing 7419 Dodge Viper GTS-R
- HPI Racing 7424 Toyota Supra
- HPI Racing 7427 Nissan Skyline R34 GT-R
- HPI Racing 7431 Mitsubishi Eclipse
- HPI Racing 7435 Porsche 911 Turbo
- HPI Racing 7438 Honda Civic Coupe SI
- HPI Racing 7440 Toyota Celica
- HPI Racing 7447 Pontiac Firebird Trans Am
- HPI Racing 7448 Mitsubishi Lancer
- HPI Racing 7449 Honda Prelude
- HPI Racing 7450 BMW M5
- HPI Racing 7452 BMW M3 GT
- HPI Racing 7455 Lexus GS400
- HPI Racing 7458 Subaru Impreza WRC 2001
- HPI Racing 7460 Chevrolet Camaro SS
- HPI Racing 7466 Toyota MR-S GT
- HPI Racing 7467 Nissan Skyline R34 GT-R
- HPI Racing 7473 2003 Dodge GTS-R
- HPI Racing 7475 Acura RSX
- HPI Racing 7478 Lexus LS430
- HPI Racing 7479 Nissan Silvia GT
- HPI Racing 7482 Mazda RX-7
- HPI Racing 7485 Nissan 350z Nismo GT
- HPI Racing 7486 Toyota Supra GT
- HPI Racing 7487 Porsche Carrera GT
- HPI Racing 7488 Mazda RX-8
- HPI Racing 7495 Ford GT
- HPI Racing 7499 HPI Racing Impreza
- Tamiya 51450 Raybrig Honda HSV-010
- Tamiya 51200 Xanavi NISMO GT-R
- Tamiya 51195 Raybrig NSX 2004
- Delta Plastik 0034 Subaru
- Delta Plastik 0037 Porsche 911
- Delta Plastik 0040 F50
- Delta Plastik 0049 Viper
- Delta Plastik 0050 Lotus Elise
- Delta Plastik 0052 CLK
- Delta Plastik 0055 Ferrari Enzo
- Delta Plastik 0056 Diablo
- Delta Plastik 0058 BMW M Coupe
- Delta Plastik 0402 Panoz Esp. GTR-1
- Delta Plastik 0405 Mustang
- Delta Plastik 0417 Ferrari F355 Challenge
__________________
www.teamcrc.com, www.teamscreamracing.com, Outlaw RC Motorsports, KO Propo USA, www.crcraceway.com, Dumper's Speedshop, FB/FX Paint. 38.4mm>38mm, 9 degrees does not = Zero end of story. Vice-President of the F1 Pink Flame Posse

Last edited by dumper; 08-25-2016 at 12:09 PM. Reason: Update Body List
dumper is offline   Reply With Quote
Old 08-28-2015, 01:27 PM   #2
Tech Fanatic
 
Join Date: Nov 2003
Location: CRC Raceway
Posts: 983
Trader Rating: 1 (100%+)
Default

No disrespect to the people that had started or posted in the prior WGT-R thread, but I needed a thread that I could update the first post to keep things current.

If you have any questions, feel free to ask!
__________________
www.teamcrc.com, www.teamscreamracing.com, Outlaw RC Motorsports, KO Propo USA, www.crcraceway.com, Dumper's Speedshop, FB/FX Paint. 38.4mm>38mm, 9 degrees does not = Zero end of story. Vice-President of the F1 Pink Flame Posse
dumper is offline   Reply With Quote
Old 08-28-2015, 02:22 PM   #3
Tech Elite
 
howardcano's Avatar
 
Join Date: Jan 2012
Location: Olathe, KS
Posts: 3,450
Trader Rating: 35 (100%+)
Default

How about the HPI Pagani Zonda #17523?
__________________
Howard Cano
When race results are re-calculated using the IOF (Index Of Fun), I always win.
1993 ROAR 1/8 Pan National Champion
howardcano is offline   Reply With Quote
Old 08-28-2015, 03:23 PM   #4
Tech Master
 
Nego's Avatar
 
Join Date: Aug 2012
Location: FL
Posts: 1,289
Trader Rating: 71 (100%+)
Default

I'm digging it man! Very similar to spec 17.5GT,especially the esc rules u guys knock it out the park on that one ! Can't wait to buy the tires and get it going!
__________________
Project X 1/10 pancar,17.5GT,1/12 BMI Copper head.
Nego is offline   Reply With Quote
Old 08-28-2015, 03:26 PM   #5
Tech Champion
 
hanulec's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2007
Location: @ the post office
Posts: 8,265
Trader Rating: 24 (100%+)
Default

Dumper- when will premounts be available?
__________________
FJ / ROAR #2-122945 / MaxRotation FPV Drone Racing / Shop@ Awesomatix USA / Wild Turbo Fan / Mon-Tech Racing / RocheRC USA / Side Piece /
LRP / John's BSR Tires / TeamEAM / TQ Wire / R1 / Team Scream / PCR / MIX
RacerLog wiki Awesomatix A700 / 2wd offroad 4 life
hanulec is offline   Reply With Quote
Old 08-28-2015, 03:56 PM   #6
Tech Elite
 
R3VoLuTiOn's Avatar
 
Join Date: Jan 2004
Location: Vancouver, Canada
Posts: 2,273
Trader Rating: 26 (100%+)
Default

no tamiya bodies?
__________________
John Tsang 🏁 VBC Racing 🚗 ORCA RC 🚗 GripworksRC 🚗 MotivRC 🚗 GravityRC 🚗 RC America

http://www.facebook.com/VancouverRRR 🏁 http://www.facebook.com/OvergearedRacing
R3VoLuTiOn is offline   Reply With Quote
Old 08-28-2015, 06:48 PM   #7
Suspended
 
Join Date: Jul 2013
Location: VALKARIA AIRPORT
Posts: 106
Thumbs up

How are these tires on black top asphalt ??? Very interested to know we are looking for a spec tire for a up coming race .
__________________
www.valkariarc.com
valkariarc@cfl.rr.com
VALKARIA RC is offline   Reply With Quote
Old 08-28-2015, 07:30 PM   #8
Tech Master
 
vivo quevas's Avatar
 
Join Date: Oct 2009
Location: Central, Ca.
Posts: 1,093
Trader Rating: 18 (100%+)
Default

Quote:
Originally Posted by R3VoLuTiOn View Post
no tamiya bodies?
+1
__________________
Tamiya/Exotek EXO6 USGT, Tamiya TB03 GT3, Exotek FR1V2
Roche Rapid 1/12, XRay Speed Merchant WGT
http://localrcracing.freeforums.org/
HobbyTown Fresno, Ca. McAllister Racing, Visa/MasterCard's
"Take an early lead and extend it".(Fast Eddie Janis)
vivo quevas is offline   Reply With Quote
Old 08-29-2015, 05:11 AM   #9
Tech Addict
 
bigcracing's Avatar
 
Join Date: Oct 2012
Location: Detroit
Posts: 589
Trader Rating: 32 (100%+)
Default

Are we going to run this class in holloween classic or start it up at the cleveland nationals
bigcracing is offline   Reply With Quote
Old 08-29-2015, 07:07 AM   #10
Tech Master
 
vivo quevas's Avatar
 
Join Date: Oct 2009
Location: Central, Ca.
Posts: 1,093
Trader Rating: 18 (100%+)
Default

What about the Protoform LFA?
It is a 200mm body.
__________________
Tamiya/Exotek EXO6 USGT, Tamiya TB03 GT3, Exotek FR1V2
Roche Rapid 1/12, XRay Speed Merchant WGT
http://localrcracing.freeforums.org/
HobbyTown Fresno, Ca. McAllister Racing, Visa/MasterCard's
"Take an early lead and extend it".(Fast Eddie Janis)
vivo quevas is offline   Reply With Quote
Old 08-29-2015, 08:27 AM   #11
Tech Regular
 
scirocco14's Avatar
 
Join Date: Dec 2013
Posts: 457
Trader Rating: 2 (100%+)
Default

I was going to convert my F103 F1 car to WGT-R specs but seeing as the mandatory CRC rims won't fit it, I guess I'm out.

The key to any class growth is low barriers to entry. The are a lot of old F103's and F104's out there in closets, not being run. Make the TIRE mandatory, but not the rims, IMHO. Let the guys bolt up the F1 wheels w/ the spec tire and boom. You have a lot of cheap potential WGT-R cars. All they need is the body mount adapter kit.

Mark
__________________
Mark C. USVTA #115 TC4 & TC5, USGT #115 Xray T4 '13
USVTA-F1 #115 F103.5 & F1R3
Tamiya M05 M06
Bush River RC, The RUG at King, Ho B Max Raceway

Last edited by scirocco14; 08-29-2015 at 10:24 AM.
scirocco14 is offline   Reply With Quote
Old 08-29-2015, 08:45 AM   #12
Tech Master
 
JustWill75's Avatar
 
Join Date: Aug 2008
Location: DOUGLASVILLE GA.
Posts: 1,778
Send a message via AIM to JustWill75
Default

I like how this is looking you guys. I havent ran my RC10R5.1 in over a year. It woul be nice to get this back on the track.
__________________
TEAM ASSOCIATED // REEDY POWER // BLAST RC
JustWill75 is offline   Reply With Quote
Old 08-31-2015, 07:39 AM   #13
Tech Fanatic
 
Join Date: Nov 2003
Location: CRC Raceway
Posts: 983
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by howardcano View Post
How about the HPI Pagani Zonda #17523?
That body looks too much like a GTP style car.
__________________
www.teamcrc.com, www.teamscreamracing.com, Outlaw RC Motorsports, KO Propo USA, www.crcraceway.com, Dumper's Speedshop, FB/FX Paint. 38.4mm>38mm, 9 degrees does not = Zero end of story. Vice-President of the F1 Pink Flame Posse
dumper is offline   Reply With Quote
Old 08-31-2015, 07:40 AM   #14
Tech Fanatic
 
Join Date: Nov 2003
Location: CRC Raceway
Posts: 983
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by hanulec View Post
Dumper- when will premounts be available?
I would suspect around November time.
__________________
www.teamcrc.com, www.teamscreamracing.com, Outlaw RC Motorsports, KO Propo USA, www.crcraceway.com, Dumper's Speedshop, FB/FX Paint. 38.4mm>38mm, 9 degrees does not = Zero end of story. Vice-President of the F1 Pink Flame Posse
dumper is offline   Reply With Quote
Old 08-31-2015, 07:40 AM   #15
Tech Fanatic
 
Join Date: Nov 2003
Location: CRC Raceway
Posts: 983
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by vivo quevas View Post
What about the Protoform LFA?
It is a 200mm body.
That body has been discontinued.
__________________
www.teamcrc.com, www.teamscreamracing.com, Outlaw RC Motorsports, KO Propo USA, www.crcraceway.com, Dumper's Speedshop, FB/FX Paint. 38.4mm>38mm, 9 degrees does not = Zero end of story. Vice-President of the F1 Pink Flame Posse
dumper is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 08:20 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net