823LikesWorld GT-R Rules and Discussion
02-10-2017, 08:21 AM
#976
Tech Regular
Setup
Is there a site that has current setup info for these cars? CRC's site is outdated and there aren't any on petit rc.
02-10-2017, 08:33 AM
#977
Tech Fanatic
iTrader: (8)
Dumper posted this a while back. Great starting point. Tune to track/driving style from there.
"Originally Posted by dumper View Post
As close to 5mm ride height as you can get
1/10th 45 front springs .590 kingpin length
1.5-2 degrees of camber
3/4 to full tire traction
5 degree caster blocks 2 or three shims forward
trailing axle, short wheelbase
red or white center spring
10k or less in the tubes
.45 or blue side springs just touching
200mm rear track width
rear ride height you can go up to 6mm if needed to get it to turn
Does your setup vary from this? What body are you running? Did you get all of the bump steer out? Any info you can provide will help......
Brian"
Hope that helps!
"Originally Posted by dumper View Post
As close to 5mm ride height as you can get
1/10th 45 front springs .590 kingpin length
1.5-2 degrees of camber
3/4 to full tire traction
5 degree caster blocks 2 or three shims forward
trailing axle, short wheelbase
red or white center spring
10k or less in the tubes
.45 or blue side springs just touching
200mm rear track width
rear ride height you can go up to 6mm if needed to get it to turn
Does your setup vary from this? What body are you running? Did you get all of the bump steer out? Any info you can provide will help......
Brian"
Hope that helps!
02-10-2017, 10:42 AM
#978
Tech Regular
Dumper posted this a while back. Great starting point. Tune to track/driving style from there.
"Originally Posted by dumper View Post
As close to 5mm ride height as you can get
1/10th 45 front springs .590 kingpin length
1.5-2 degrees of camber
3/4 to full tire traction
5 degree caster blocks 2 or three shims forward
trailing axle, short wheelbase
red or white center spring
10k or less in the tubes
.45 or blue side springs just touching
200mm rear track width
rear ride height you can go up to 6mm if needed to get it to turn
Does your setup vary from this? What body are you running? Did you get all of the bump steer out? Any info you can provide will help......
Brian"
Hope that helps!
"Originally Posted by dumper View Post
As close to 5mm ride height as you can get
1/10th 45 front springs .590 kingpin length
1.5-2 degrees of camber
3/4 to full tire traction
5 degree caster blocks 2 or three shims forward
trailing axle, short wheelbase
red or white center spring
10k or less in the tubes
.45 or blue side springs just touching
200mm rear track width
rear ride height you can go up to 6mm if needed to get it to turn
Does your setup vary from this? What body are you running? Did you get all of the bump steer out? Any info you can provide will help......
Brian"
Hope that helps!
02-10-2017, 03:14 PM
#980
I'm gonna raise my rear height and give that a go.
Quick question for those that switched to the new GTR chassis, did it make a really big difference? I have the Gen X SE chassis. I think I'm going to convert back to foam since that is what it is designed for.
There's a kit at the track that is calling me name LOL
Quick question for those that switched to the new GTR chassis, did it make a really big difference? I have the Gen X SE chassis. I think I'm going to convert back to foam since that is what it is designed for.
There's a kit at the track that is calling me name LOL
02-11-2017, 09:59 AM
#983
02-11-2017, 11:21 AM
#984
Tech Regular
02-11-2017, 02:10 PM
#989
Tech Regular
