AIRTRONICS M11
#1
AIRTRONICS M11
is this a good radio to use with the KO PROPO ESC VFS 1,KO PROPO SEFVO-2364,and the RECEIVER that cOMES with the M11?
We were gonna use it on the tamiya 415....kitty
We were gonna use it on the tamiya 415....kitty
#2
This is a great radio to use. I went from an M8 to the M11 and I am very happy with it. I am using the Spektrum or my Novak Switch with JR310 recievers and I am having great luck with it. It can be a little difficult to set up the first time as there is a bunch of new stuff but read the instructions and you'll be fine.
#3
Originally Posted by Scottmisfits
This is a great radio to use. I went from an M8 to the M11 and I am very happy with it. I am using the Spektrum or my Novak Switch with JR310 recievers and I am having great luck with it. It can be a little difficult to set up the first time as there is a bunch of new stuff but read the instructions and you'll be fine.
#4
I second that. Upgraded from a Airtronics MX3-S, and have been happy ever since. I am also running the Spektrum on 5 cars with no problems. Had to get a minor repair done to it from a slight accident I had, and Airtronics had it repaired the following day :-) They have great customer service.
#5
Originally Posted by HELLOkitty
is this a good radio to use with the KO PROPO ESC VFS 1,KO PROPO SEFVO-2364,and the RECEIVER that cOMES with the M11?
We were gonna use it on the tamiya 415....kitty
We were gonna use it on the tamiya 415....kitty
It's easier to put just KO sticker as a sponsor on your bodyshell LOL
#6
Originally Posted by daniz24
If you already have KO ESC and KO Servo why not choose KO Helios?
It's easier to put just KO sticker as a sponsor on your bodyshell LOL
It's easier to put just KO sticker as a sponsor on your bodyshell LOL
#7
Tech Adept
I used the M11 FM receiver briefly before switching to Spektrum. It worked well with my KO 2123 though I did need to wire up an FET line since my cheap LRP A.I. didn't have one.
The M11 also works very nicely with my Spektrum set up with the KO 2123 and a Tekin G10+ ESC.
Ira
The M11 also works very nicely with my Spektrum set up with the KO 2123 and a Tekin G10+ ESC.
Ira
#8
Originally Posted by iblumberg
I used the M11 FM receiver briefly before switching to Spektrum. It worked well with my KO 2123 though I did need to wire up an FET line since my cheap LRP A.I. didn't have one.
The M11 also works very nicely with my Spektrum set up with the KO 2123 and a Tekin G10+ ESC.
Ira
The M11 also works very nicely with my Spektrum set up with the KO 2123 and a Tekin G10+ ESC.
Ira
#9
Originally Posted by HELLOkitty
so the M11 receiver is decent?
#10
Originally Posted by koabich
Yes, the M11 reciever is great. It's the same receiver that they have been using for years. The only issue I have with it is its size. Their 2 channel model receiver is much smaller. But unless you want a smaller receiver or want to use the Spektrum unit, there is NO NEED AT all to use a different receiver.
#11
Originally Posted by HELLOkitty
the receiver i got with the M11 is very small...i think that is a good thing...it will be sitting next to the ko propo servo i just got....
#12
will the M11 work on Futaba receivers using Airtronics crystals
#13
Ive got a Rx211 receiver new in packet (unopened), 40mghz, Sanwa sticker..same item as Airtronics.
been trying to sell it for months as I no longer need it as a spare...they are great receivers, and super small.
P.M me if anyone is looking for one.
been trying to sell it for months as I no longer need it as a spare...they are great receivers, and super small.
P.M me if anyone is looking for one.
Last edited by King-G; 10-31-2005 at 04:22 PM.