2015 and 2017 T4 Part Compatability
11-03-2019, 06:02 PM
#1
2015 and 2017 T4 Part Compatability
Does anyone have an idea how many of the parts are interchangeable with each other? Thanks
11-03-2019, 07:21 PM
#2
Only parts that are not compatible off the top of head is the chassis, servo mount, bulkheads, motor mount, and sway bars.
11-04-2019, 02:47 AM
#3
Bulkheads and anti-roll bars are also the same.
The motor mount will also fit, and you can even fit a '17 chassis onto a '15.
It's only really the motor mount plate that's different; it has more holes on the 17. But the important holes are in the same place.
The motor mount will also fit, and you can even fit a '17 chassis onto a '15.
It's only really the motor mount plate that's different; it has more holes on the 17. But the important holes are in the same place.
11-04-2019, 01:30 PM
#4
You are correct, I thought the 15 didn't have the bearing supported anti roll bar. I did not know that about the motor mount and chassis!
11-04-2019, 02:12 PM
#5
Compatibility spreadsheets are available on Xray's site...
T1/T2/T3/T4
XLS - https://www.teamxray.com/teamxray/sh...?file_id=13331
PDF - https://www.teamxray.com/teamxray/sh...?file_id=13332
T1/T2/T3/T4
XLS - https://www.teamxray.com/teamxray/sh...?file_id=13331
PDF - https://www.teamxray.com/teamxray/sh...?file_id=13332
11-04-2019, 04:18 PM
#6
Great. Thank you everyone for the replies
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
