flysti

iTrader: (3)

thats a very good price if correct din, i also found a store selling for 720 singapore dollars, the store is madaboutrc.com

bender

iTrader: (4)

Just checked that shop out. Not sure if it's the latest Atlas but boy those prices (when converted)are expensive

If Jet Hobby do have them for US$309 then that's a very good price for a modern tc

bender

iTrader: (4)

I just received a reply from Jet hobby, their price was HKD$3290 which equates to roughly US$420+

A little too rich for me!

Din Viesel

I too re-recieved an e-mail for a price quote, I thought that the price was in Japanese Yen....which with the current exchange rates was $329.00 USD. I did not realize that Jet was in Hong Kong. That is alittle steep but the sad thing is I will probably pay that! Does any one have the new Manual and parts list for this car downloaded to there PC that could e-mail it??

Thanks

flysti

iTrader: (3)

still a good price!!! if you go to http://www.miwahobby.co.jp/ you can download the manual in pdf form.

Din Viesel

Unfortunately my PC will not open or respond to 90% of Miwa's web site. Thats why I was hoping some one here might have it.

flysti

iTrader: (3)

well after running the car for the first time on sunday i can happily say good things about the car.

mid corner entry exist speed is awsome, the strenght of the car is also a good point! i found this out by being a bit rusty in the driving department having not drivin a car for about 4-5 months.

hey din forget that pm i sent you hey!! i might keep this one

overall i would highly recommend this car. good performance & bling to match

BillyCaldwell

iTrader: (32)

What all parts came aluminum on it from the kit?

bender

iTrader: (4)

Did you get the 2005 version?

flysti

iTrader: (3)

alloy parts a plenty

flysti

iTrader: (3)

it is the si type II not the 2005 version. i could easily update the car to 05 spec though.

Din Viesel

I was wondering if any one (who still reads this) can tell me if they know of anyone who cuts custom chasis's?..... I race 90% carpet and the stock chasis is a little to flexible for my comfort. Or is there some one on the other side of the pond that sells an after market thicker chasis for the SI??

flysti

iTrader: (3)

hey,

how thick is the one thats on the car? on the siII it's 2.5mm i pretty sure of this.

btw the offer still apply's

THE_REAL_FROBOY

i had a type t and i ran 2 top decks. it mad the car tons stiffer than before. if i were you i would try that.

flysti

iTrader: (3)

can i also say that getting a custom chassis made up is going to cost you. you could look at a thicker top deck, this would save you some penny.