Speedmerchant Roadkill 10 235mm Pro10 Pancar
#376
Is the battery a 1s or 2s shorty? And what's around the battery?
#383
Tech Champion
iTrader: (34)
My RK235 is setup to run 1s 10.5 open
A normal 2s will "fit"
But you would have to mount it inline with electronics on either side, as far back as possible
This would likely have a poor balance, especially for asphalt
Would recommend adding more weight to rear in that config
A shorty 2s pack transverse would be much better than full 2s inline
Also, most pan car springs fit on the kit shock
Maybe start with something like an AE Gold or Red, 35wt oil
better pic attached
A normal 2s will "fit"
But you would have to mount it inline with electronics on either side, as far back as possible
This would likely have a poor balance, especially for asphalt
Would recommend adding more weight to rear in that config
A shorty 2s pack transverse would be much better than full 2s inline
Also, most pan car springs fit on the kit shock
Maybe start with something like an AE Gold or Red, 35wt oil
better pic attached
#384
Tech Elite
iTrader: (32)
We have a new track up north now that has a 240 back straight. I think this 235 would be sick on this track. Looking good Dave!
My RK235 is setup to run 1s 10.5 open
A normal 2s will "fit"
But you would have to mount it inline with electronics on either side, as far back as possible
This would likely have a poor balance, especially for asphalt
Would recommend adding more weight to rear in that config
A shorty 2s pack transverse would be much better than full 2s inline
Also, most pan car springs fit on the kit shock
Maybe start with something like an AE Gold or Red, 35wt oil
better pic attached
A normal 2s will "fit"
But you would have to mount it inline with electronics on either side, as far back as possible
This would likely have a poor balance, especially for asphalt
Would recommend adding more weight to rear in that config
A shorty 2s pack transverse would be much better than full 2s inline
Also, most pan car springs fit on the kit shock
Maybe start with something like an AE Gold or Red, 35wt oil
better pic attached
#385
Tech Regular
iTrader: (28)
Attached is a pic of my car that has been run on the super high bite Snowbird tracks and US Indoor Champs. The idea is to have a class with WGT tires, 1S, GTP bodies, and 10.5 motors. I ran 5.0 mod in this car, and on those tracks, you really cannot have more fun driving an RC car. Its literally glued to the carpet, and taking a sweeper near full speed with this car produces feelings that no anti-depressant in the world can create.
Set up is just about the same as my WGT car:
.18 front springs
.22 side springs
Red Spooge in the tubes
35 weight oil in the center spring
Wolf Motorsports Black Center 17 pound spring
4 degrees castor
.5 degree of camber for the high bite.
Set up is just about the same as my WGT car:
.18 front springs
.22 side springs
Red Spooge in the tubes
35 weight oil in the center spring
Wolf Motorsports Black Center 17 pound spring
4 degrees castor
.5 degree of camber for the high bite.
#386
Tech Champion
iTrader: (34)
Attached is a pic of my car that has been run on the super high bite Snowbird tracks and US Indoor Champs. The idea is to have a class with WGT tires, 1S, GTP bodies, and 10.5 motors. I ran 5.0 mod in this car, and on those tracks, you really cannot have more fun driving an RC car. Its literally glued to the carpet, and taking a sweeper near full speed with this car produces feelings that no anti-depressant in the world can create.
#387
Tech Regular
iTrader: (21)
My RK235 is setup to run 1s 10.5 open
A normal 2s will "fit"
But you would have to mount it inline with electronics on either side, as far back as possible
This would likely have a poor balance, especially for asphalt
Would recommend adding more weight to rear in that config
A shorty 2s pack transverse would be much better than full 2s inline
A normal 2s will "fit"
But you would have to mount it inline with electronics on either side, as far back as possible
This would likely have a poor balance, especially for asphalt
Would recommend adding more weight to rear in that config
A shorty 2s pack transverse would be much better than full 2s inline
Also sent email to speed merchant but haven't gotten response in a few days... I hope this isn't a sign for quality of customer service as the vbc lightning 235 kit looks pretty dreamy too. I'm on the fence...
#390