Mi1 / Viper VXT setup help please
#1
Mi1 / Viper VXT setup help please
Just getting into touring car racing. I have a Schumacher Mi1 that I got used. Checked it over and set it up as suggested for carpet racing with foam tires.
Race Info:
Open TC - boost allowed / foam tires
Spec TC - Blinky mode, 17.5, and rubber tires
Until I get a 17.5 I will be running this with a 10.5 in Open TC. When the 17.5 arrives (2-4 weeks) I will be running two classes using same motor.
Track conditions:
Indoor/ Carpet
Traction compound allowed
Small layout / tight turns - Chicanes, 90s, and 180s + 1 full length straight away maybe 50-70 yrds
Traction comes up throughout race night
Suggestions for Viper VXT10-BE ESC setup please
I have the pro-gauge so adjusting settings is no problem. I can store a profile for each motor/ race combination.
Thanks in advance
Race Info:
Open TC - boost allowed / foam tires
Spec TC - Blinky mode, 17.5, and rubber tires
Until I get a 17.5 I will be running this with a 10.5 in Open TC. When the 17.5 arrives (2-4 weeks) I will be running two classes using same motor.
Track conditions:
Indoor/ Carpet
Traction compound allowed
Small layout / tight turns - Chicanes, 90s, and 180s + 1 full length straight away maybe 50-70 yrds
Traction comes up throughout race night
Suggestions for Viper VXT10-BE ESC setup please
I have the pro-gauge so adjusting settings is no problem. I can store a profile for each motor/ race combination.
Thanks in advance