Xray t4'15
#1756
Tech Master
I'm trying to reduce the rear toe-in but no matter what combination of hinge pin inserts I use I can't get less than 3* Do I have to purchase the optional front hinge pin mount? I'm looking to get about 1.5 to 2* of rear toe in.
Thanks for any help.
Thanks for any help.
#1757
Tech Fanatic
iTrader: (7)
One thing that can happen, if you are using a setup station is that the plastic piece on top can hit the body posts, so it doesn't seem like things are moving. Remove or just push aside the body posts.
#1759
Tech Master
Yup, that did it, it didn't occur to me to turn the 1* block side ways Duh!
Can you answer another question? The manual shows an optional rear 1 piece suspension holder, #303711-0 that takes the place of the two stock ones. The manual says it increases steering, how does it do that? Thanks again for your help.
Can you answer another question? The manual shows an optional rear 1 piece suspension holder, #303711-0 that takes the place of the two stock ones. The manual says it increases steering, how does it do that? Thanks again for your help.
#1760
Suspended
Yup, that did it, it didn't occur to me to turn the 1* block side ways Duh!
Can you answer another question? The manual shows an optional rear 1 piece suspension holder, #303711-0 that takes the place of the two stock ones. The manual says it increases steering, how does it do that? Thanks again for your help.
Can you answer another question? The manual shows an optional rear 1 piece suspension holder, #303711-0 that takes the place of the two stock ones. The manual says it increases steering, how does it do that? Thanks again for your help.
#1761
Tech Master
#1762
#1763
Tech Master
I think I'll find another way to get more steering, I just saw it in the manual and was curious about it. Ya never know unless you ask
#1764
Remember you can also use the different combinations to reduce rear track width whilst reducing the toe as well which can help with steering and rotation
#1765
Tech Master
Hey guys, I was just on the Xray site trying to find a good low to mid grip asphalt setup any suggestions?
#1766
Tech Master
iTrader: (10)
#1767
Tech Master
Thanks for the link.
#1768
Can I use the hiro seiko t4 2016 screw kit on my 2015? Or are a lot of screws different sizes? Or does anyone know where I can get a 2015 set? Anyone used those Twork's brand screws on eBay? Any good?
#1769
#1770