Tamiya TA05-VDF2 Official Thread
#1
Tamiya TA05-VDF2 Official Thread
This is an evolved version of Item 84132 TA05-VDF chassis. The original VDF's basic layout has been kept, but the vertical double frame has been changed to a single frame to offer greater chassis roll flexibility. The carbon fiber lower deck has also been redesigned with more roll flexibility. The 3-belt drivetrain features a new aluminum motor bulkhead which has a lower spur gear position. In addition, the parallel geometry steering setup enables a wider range of setting possibilities. Just like its predecessor, the new VDF II chassis also comes with high-spec parts such as TRF dampers, short reversible suspension arms, front ball differential, and rear direct coupling.
Scale: 1/10 scale
Construction type: assembly kit
Terrain: use on-road
Drive-train: 4WD
Drive type: belt
Drive line: universal
Differential type: direct coupling (spool) & ball differential
Suspension: fully independent double wishbone
Steering mechanism: bell-crank
Shock damper: oil-filled damper
Shock damper material: aluminum
Tire type: not inluded
Tire tread: n/a
Body material: n/a
ESC: not included
ESC type: N/A
LED Light buckets: no
LED lights: no
Motor type: not included
Bearings: shielded ball bearing
Chassis material: carbon fiber plate
Sticker material: n/a
Internal gear ratio :
Adjustable camber: yes
Adjustable toe angles: front and rear
Adjustable ride height: yes
Adjustable gear ratio: yes
Adjustable wheelbase: yes
Adjustable track width: yes
Adjustable shock angle: yes
Anti-squat adjustment: yes
Droop adjustment: yes
Special features: triple belt drive-train, short reversible suspension from TRF416-417, TA05V2 & TB-03
Requires: 7.2 battery & charger
Requires: radio gear, servo, receiver
Requires: wheels, tires, body set, motor, esc
Requires: polycarbonate paint
This description was taken from:
http://banzaihobby.com/RC-Drift-Tamiya-84294-TA05-VDF2
This is the official thread for the Tamiya TA05-VDF 2! Please share all comments and setups for this chassis here! Please share links to videos if made by you or found on youtube!
Scale: 1/10 scale
Construction type: assembly kit
Terrain: use on-road
Drive-train: 4WD
Drive type: belt
Drive line: universal
Differential type: direct coupling (spool) & ball differential
Suspension: fully independent double wishbone
Steering mechanism: bell-crank
Shock damper: oil-filled damper
Shock damper material: aluminum
Tire type: not inluded
Tire tread: n/a
Body material: n/a
ESC: not included
ESC type: N/A
LED Light buckets: no
LED lights: no
Motor type: not included
Bearings: shielded ball bearing
Chassis material: carbon fiber plate
Sticker material: n/a
Internal gear ratio :
Adjustable camber: yes
Adjustable toe angles: front and rear
Adjustable ride height: yes
Adjustable gear ratio: yes
Adjustable wheelbase: yes
Adjustable track width: yes
Adjustable shock angle: yes
Anti-squat adjustment: yes
Droop adjustment: yes
Special features: triple belt drive-train, short reversible suspension from TRF416-417, TA05V2 & TB-03
Requires: 7.2 battery & charger
Requires: radio gear, servo, receiver
Requires: wheels, tires, body set, motor, esc
Requires: polycarbonate paint
This description was taken from:
http://banzaihobby.com/RC-Drift-Tamiya-84294-TA05-VDF2
This is the official thread for the Tamiya TA05-VDF 2! Please share all comments and setups for this chassis here! Please share links to videos if made by you or found on youtube!
#3
Tech Initiate
Fantastic...
#4
Im excited to see what its like and am interested in selling my rc8be for that car!
#6
whats the deal with the drift scene in the US
you cant find stuff, Ive looked into the TC-FD and the VDF2 and I havent bought either one for the lack of spare parts or info about the chassis.
the E4D MF pro is the only thing I can find spare parts for. even something as simple as belts.
you cant find stuff, Ive looked into the TC-FD and the VDF2 and I havent bought either one for the lack of spare parts or info about the chassis.
the E4D MF pro is the only thing I can find spare parts for. even something as simple as belts.
#7
whats the deal with the drift scene in the US
you cant find stuff, Ive looked into the TC-FD and the VDF2 and I havent bought either one for the lack of spare parts or info about the chassis.
the E4D MF pro is the only thing I can find spare parts for. even something as simple as belts.
you cant find stuff, Ive looked into the TC-FD and the VDF2 and I havent bought either one for the lack of spare parts or info about the chassis.
the E4D MF pro is the only thing I can find spare parts for. even something as simple as belts.
Iv done a bunch to it within the month iv had it and yesterday just picked up some universal dogbons so i can shave the Chub / buckle for more steering angle.
Im going to start with the easiest CS 53% to start. and then mess with getting more weight into the front of chassis and softer springs for weight shifting.
#8
Tech Rookie
ordered one of these beasties online last week, completly new gear going in. this is my first drift car so will just be learning as i go any way heres my set up
ta05 vdf v2 chassis
drift spec novak 13t motor and esc combo
spektrum dx3s and sr3300t receiver
couple of turningy 5200mAh lipo's
Savox SC-1251MG servo
this is the first time i have used any of this gear so am interested to see what the whole project turs out like, any comments on what you guys think of the set up will be appreciated.
also would like to know what kind of mods you guys have been using and work best etc
ta05 vdf v2 chassis
drift spec novak 13t motor and esc combo
spektrum dx3s and sr3300t receiver
couple of turningy 5200mAh lipo's
Savox SC-1251MG servo
this is the first time i have used any of this gear so am interested to see what the whole project turs out like, any comments on what you guys think of the set up will be appreciated.
also would like to know what kind of mods you guys have been using and work best etc
#9
Tech Master
iTrader: (18)
hey guys i own both vdf 1 and 2 and the ver2 is so much better then ver1
as like other chassis you get what you pay for and i will be upgrading mine
i just got it 3 weeks ago so ill let you guys know what i end up doing
im building and running 4 chassis
MST fs-01d red
Team magic E4D MF pro
3racing Sakura D3
Tamiya VDF ver2
the gear i run in all my chassis
Servo
Savox 1257tg or 1251mg and spektrum 6040
Radio
Spektrum Dx3r pro rx sr3100
motor
10.5 sensor
as like other chassis you get what you pay for and i will be upgrading mine
i just got it 3 weeks ago so ill let you guys know what i end up doing
im building and running 4 chassis
MST fs-01d red
Team magic E4D MF pro
3racing Sakura D3
Tamiya VDF ver2
the gear i run in all my chassis
Servo
Savox 1257tg or 1251mg and spektrum 6040
Radio
Spektrum Dx3r pro rx sr3100
motor
10.5 sensor
#10
What would be a good motor setup for the Tamiya VDF2 and also what lipos are you guys running? Would really help me out! I wanna get a nice motor..preferred Brushless system. Thanks guys in advance !
#11
seems most people just throw what they already have in it and drive it.
I have an 8.5 in my sprint 2 drift right now but my VDF2 shipped today.
im thinking of going with something between 8.5-13 for the vdf2
can someone post a link or a part number for all the belts that are in the car, I wanna order at least one spare of each belt but I dont have part numbers or know any places that sell them.
for a battery im sure any 5000mah lipo will fit fine, i may go with one in some kind of carbon wrapping to match the chassis
I have an 8.5 in my sprint 2 drift right now but my VDF2 shipped today.
im thinking of going with something between 8.5-13 for the vdf2
can someone post a link or a part number for all the belts that are in the car, I wanna order at least one spare of each belt but I dont have part numbers or know any places that sell them.
for a battery im sure any 5000mah lipo will fit fine, i may go with one in some kind of carbon wrapping to match the chassis
#12
anyone got any links or part numbers for all three belts on the VDF2?
I wanna order some spares
I wanna order some spares
#13
I found the part numbers for the belts in case anyone else is needing them also.
medium & short belt: 6244027
Long belt: 6244026
medium & short belt: 6244027
Long belt: 6244026
#14
Finally got everything together and drove the car for the first time with a xern 10.5t motor which is considered a competiton motor for drifting snd i am pretty excited to do some drifting with this kit!
#15
Is anyone still drifting the VDF2 at all? I can't seem to find a lot of people who have the chassis!