161LikesTamiya TB Evo 6
07-21-2016, 09:21 PM
#2101
Speed Passion 1/10 Mazda Furai #168MF69
http://www.rcmart.com/speed-passion-...?cPath=438_875
http://www.rcmart.com/speed-passion-...?cPath=438_875
07-21-2016, 09:54 PM
#2102
Looking forward to getting the front hubs for my 418. Was great racing with you Mike a few weeks ago!
07-22-2016, 12:35 AM
#2103
Mike Rydwell, congrats on the win. Unforunatly back markers got me. Looking forward to next year and by the way it's a Warpspeed Tc3 .. Thanks for the mention... Hi All,
Great results with the Tamiya/EXO-SIX! TQ'd and won USGT class at the packed 8th annual Time Zone Grand Prix.
On the big open track the EXO SIX drive shaft really shown through as it out powered the belted cars quite visibly. The only car that could match the top speeds were a carbon fiber TC4 car but thats where the Tamiyas infield handling took over. Really loving this car even if I say so myself lol
Note, alloy chassis was used simply because of the 1450gr weight rule. I still had to add many blocks of lead.
Great results with the Tamiya/EXO-SIX! TQ'd and won USGT class at the packed 8th annual Time Zone Grand Prix.
On the big open track the EXO SIX drive shaft really shown through as it out powered the belted cars quite visibly. The only car that could match the top speeds were a carbon fiber TC4 car but thats where the Tamiyas infield handling took over. Really loving this car even if I say so myself lol
Note, alloy chassis was used simply because of the 1450gr weight rule. I still had to add many blocks of lead.
07-22-2016, 12:47 AM
#2104
Tech Rookie
nice. gonna buy it.
07-22-2016, 06:21 AM
#2106
Looks like CRC aluminum pinion.
07-22-2016, 12:38 PM
#2107
07-22-2016, 12:46 PM
#2108
Irs spool on that tc3, with lots of other drivetrain lightening mods....Sure helped it keep up with the exo6 on the straight...
07-22-2016, 12:56 PM
#2109
Mike's car is very well done. Was nice seeing another Driveshaft car racing. That Tamiya car looked good.
Driveshaft is the way to go. I think if you have a smooth throttle finger it will suit you.
We were both clicking fast laps , hard work pushing a Caddilac down that long straight.
07-22-2016, 01:24 PM
#2110
You got the right combination of available parts to run the lightest drivetrain possible, and it works... I am going to add aluminum axles(custom made)/input shafts to that combo, and give it a go on the black carpet 17.5t blinky...Cheers....
07-22-2016, 03:12 PM
#2111
Bert your driving needs more help, not those parts.
07-22-2016, 05:12 PM
#2112
Yes, and I got a hudy setup station to help that too...Zero steel in my car: that's my goal.... It should all come together in the winter... See you guys at the track, and I hope to find a few exo6 cars there too...
07-23-2016, 03:43 AM
#2114
