Glitching when I turn the wheel
I have a QC2, Airtronics 3-ch receiver, and a JR 4750, and whenever I twitch the wheel really fast, or let go of it and the wheel bounces back and forth a little bit, the motor jumps and sometimes the servo goes screwy. I've noticed on my Hitec receiver that the power light dims a bit when the glitching happens.
I've tried the 945MG servo with the same results, and it happens with or without the personal transponder.
I can move the wheel slowly no problem, it's just with sudden movements, or sometimes when I take a hit on the boards.
Now, I've had to replace the servo lead on my servo and QC2, but I've made sure the connections are solid and the wires touch directly.
Is it the ESC not supplying enough power to prevent glitching, or the servo for taking too much current?
Thanks for your time,
-=≡ Tamiya TA05 · TRF415MSX · F103R · M-03R · M-04 · M-05 ≡=-
-=≡ CRC Carpet Knife 3.2 · OFNA LD3 Pro · Fastcats · Spektrum ׀ווlı ≡=-