New body release- Daytona Prototype
11-26-2013, 02:46 PM
#31
Got my body done and I can't wait to run it.
11-26-2013, 05:16 PM
#33
12-02-2013, 10:05 AM
#34
Well got my chance on running the body, and man its corner speed is good, the first night I took it to TQ Raceway in Chino and it really had some downforce so much that the chassis was bobbing up and down off and on power when I did a spring change on the rear. I had a really bad traction roll going into the sweeper and lost the side winglets and from there the body was losing the rear end side bite. I went on Sat to Cal Raceway for some asphalt running and without the winglets it was fishtailing, I was working on suspension grip most of the time and didn't work on the wing when I should have but on Sun I finnaly worked on a wicker and side wings and the car tracked a whole lot better out of the corners and the corner speed was back, but I also got the push when I worked on getting that rear grip so I need to go back on my setup to get the better balance on the body but man it was fast on high speed corners and I pan cars get out of my way as I was closing in on them hard. I raced it GT10 and won but there were some debaters about the body in the class.
12-02-2013, 11:46 AM
#35
Well got my chance on running the body, and man its corner speed is good, the first night I took it to TQ Raceway in Chino and it really had some downforce so much that the chassis was bobbing up and down off and on power when I did a spring change on the rear. I had a really bad traction roll going into the sweeper and lost the side winglets and from there the body was losing the rear end side bite. I went on Sat to Cal Raceway for some asphalt running and without the winglets it was fishtailing, I was working on suspension grip most of the time and didn't work on the wing when I should have but on Sun I finnaly worked on a wicker and side wings and the car tracked a whole lot better out of the corners and the corner speed was back, but I also got the push when I worked on getting that rear grip so I need to go back on my setup to get the better balance on the body but man it was fast on high speed corners and I pan cars get out of my way as I was closing in on them hard. I raced it GT10 and won but there were some debaters about the body in the class.
12-02-2013, 12:32 PM
#36
it's the pink body on this page.
12-02-2013, 12:34 PM
#37
[/YOUTUBE]http://youtu.be/XgArFhdgn2o
12-02-2013, 06:22 PM
#40
That looks awesome, will have to change my plans to paint it like the real one, ordered mine here http://racevta.com/product_info.php?...mblbel9kodgrp2
12-03-2013, 09:46 AM
#41
Nice track...cool paint...great run!!!
12-08-2013, 10:27 AM
#42
Got mine painted up! Such a good looking body, with a scale looking paint scheme I think it may fit into USGT! It would be a perfect body for TC mod if it were legal, it looks good with dish wheels too.
12-08-2013, 11:01 AM
#44
Thanx! i dont think that its going to go over to well in USGT although with Scale schemes and if you had a few together on the track it can be passed off like 1:1 as in they run them both on the track at the same time.
12-08-2013, 02:05 PM
#45
Can we vote R2 or Mantis in as president of a USDP Series? !!!!
It would be nice to have a USDP Series...an actual current U.S. road racing series.
It would be nice to have a USDP Series...an actual current U.S. road racing series.