Speed Passion brand new Spec Racing LeMans car - The LM1
#1051
Tech Master
iTrader: (1)
Just a suggestion regarding reinforcing bodies, DO NOT use the open mesh fiberglass from Home Depot or Lowe's. That stuff does very little. Try "wing joining tape" in the aircraft section of the hobby shop. That stuff is intended to be structural. I put Shoe Goo (or E6000) down first and then use a body filler blade to squeegee the fiberglass on top.
#1052
Any ETA on the Lemans as a rtr or rolling chassis style?
Last edited by Schs2013; 01-12-2015 at 01:32 AM.
#1053
Greetings Lincolnrc001. Thank you for that link. The track seen in that Blog is awesome.And the info in the blog is informative.
#1054
Tech Rookie
do any one knows if there is a carbon fiber a rear link arm made for this car thanks
#1057
Tech Addict
Heck, I'll sell you mine. Built and practiced twice, never raced. $100 plus shipping...
Just haven't had time to post it.
Just haven't had time to post it.
#1058
I thought you all might like to see the promo I did for the LM-1 spec class at Premier RC.
http://youtu.be/85es-fe-A_w
Alternative music version: http://youtu.be/QPQb6IvNYW8
Regarding the body, the front has taken quite a beating and has lost a few bits; but other than that it's holding up well. I'll post a picture later.
-Frank
http://youtu.be/85es-fe-A_w
Alternative music version: http://youtu.be/QPQb6IvNYW8
Regarding the body, the front has taken quite a beating and has lost a few bits; but other than that it's holding up well. I'll post a picture later.
-Frank
#1062
Tech Champion
iTrader: (42)
In regards to bodies, all the Speed Passion bodies will hold up welll just like any other touring car body. Any of the parts that instruct you to use double sided tape to affix to the body you can substitute screws. The best bodies I've seen worked up use the little Tamiya body screws/nuts that come with their kits. Built with those they hold up like champs.
Someone mentioned a RTR version. At this point it's been talked about, but nothing final. A lot is going on with the new V4 modifieds just released, V4 spec motors about to drop, and other new things...
#1063
Tech Addict
Link to listing in classifieds:
http://www.rctech.net/forum/r-c-item...l#post13869305
UPDATE: Sold pending funds
Last edited by .crispy; 02-27-2015 at 04:28 AM.
#1064
Tech Master
iTrader: (1)
Whistler Mustang
Hey guys,
Here is my Whistler Mustang for our Xfinity LM-1 class. It still needs it's numbers, but for the most part it's complete
The body is a McCallister Mustang Nascar using Duratrax body posts with a VBC Wildfire foam bumper. Everything fits without modification.
Here is my Whistler Mustang for our Xfinity LM-1 class. It still needs it's numbers, but for the most part it's complete
The body is a McCallister Mustang Nascar using Duratrax body posts with a VBC Wildfire foam bumper. Everything fits without modification.