Serpent 747-e
12-30-2014, 03:13 AM
#123
Tech Adept
Found a kit. Had to remake the rear shock brace due to shorter dampers. The rest was kind of spot on.
The body is for a 220mm conversion but was parfect for this project. The chassie is 230mm wide at the rear end
The body is for a 220mm conversion but was parfect for this project. The chassie is 230mm wide at the rear end
12-30-2014, 03:27 AM
#124
Tech Adept
Nice, where did you get the floating body mount? I probably need one more.
What brand body is that and how wide mm is it 220 ore 230?
I been using Blitz P908 1/10 230mm GP body.
Yes its going to be a monster, first summer i have play whit mine. Started out 3cell and Tekin Rx8 gen2 and Pro 2 5100kw. Mid summer i got Pro 2 5900kw and whit that puni engine i was almost down to 1:8 nitro track lap times.
Late summer i got Lrp 4700kw long can. Only used Lrpix8 on it. Gen2 died bit before i got it(: But on those few test runs close to minus degree it was enough. I Might use tekin Pro4 4600 ore Prohd 4300 next summer, the weight and can length fits better balance 3 cell battery and its probably more than enough to park those 1:8 nitro track cars.
What brand body is that and how wide mm is it 220 ore 230?
I been using Blitz P908 1/10 230mm GP body.
Yes its going to be a monster, first summer i have play whit mine. Started out 3cell and Tekin Rx8 gen2 and Pro 2 5100kw. Mid summer i got Pro 2 5900kw and whit that puni engine i was almost down to 1:8 nitro track lap times.
Late summer i got Lrp 4700kw long can. Only used Lrpix8 on it. Gen2 died bit before i got it(: But on those few test runs close to minus degree it was enough. I Might use tekin Pro4 4600 ore Prohd 4300 next summer, the weight and can length fits better balance 3 cell battery and its probably more than enough to park those 1:8 nitro track cars.
12-30-2014, 05:38 AM
#125
Tech Rookie
Lrp Ix8 is probably the most shitty esc ever sold, only one i had to try the 4700kv.
Gen2 is probably the best esc use. Low weight compare to many other esc brands. Trying to wait, Gen2 have been on marked a while now. Was hoping Tekin make a Gen3 in some sexy alu housing bit dust proof would be cool soon!
Rx8 only big fault is housing soak dust, you get corrosion on the components.
I been using Viper VTX8 alot on the car, very smooth esc. Vtx8 113g no wires Gen2 76.5g.
Been drooling a bit on Orion Vortex R8.1 Pro 2-4S 180A but its so heavy 146g.
Gen2 is probably the best esc use. Low weight compare to many other esc brands. Trying to wait, Gen2 have been on marked a while now. Was hoping Tekin make a Gen3 in some sexy alu housing bit dust proof would be cool soon!
Rx8 only big fault is housing soak dust, you get corrosion on the components.
I been using Viper VTX8 alot on the car, very smooth esc. Vtx8 113g no wires Gen2 76.5g.
Been drooling a bit on Orion Vortex R8.1 Pro 2-4S 180A but its so heavy 146g.
Last edited by Yuppe; 12-30-2014 at 05:55 AM.
12-30-2014, 06:11 AM
#127
Tech Adept
Thx Evo. Like ur Porsche too....
12-30-2014, 06:32 AM
#128
Tech Rookie
puttekula
4 cell and Pro4 ore hd might be perfect if use not so heavy 4 cell pack.
I probably try that to, when i get bored of 3 cell
But for now on a track 3 cell is more than enough for me and hopefully enough to get better lap times than 1:8 Track. If not then i really hurry get 4 cell
4 cell and Pro4 ore hd might be perfect if use not so heavy 4 cell pack.
I probably try that to, when i get bored of 3 cell
But for now on a track 3 cell is more than enough for me and hopefully enough to get better lap times than 1:8 Track. If not then i really hurry get 4 cell
12-30-2014, 06:42 AM
#129
Tech Adept
I have Hyperion 3300mah 4s 45c packs. They are by a margin heavier than
2s 7200mah. Smaller in size but a little bit higher.
We have a small thread about this concept over here in Sweden. Something for you Yuppe to fill
in with?
http://rsb.se/arena/showthread.php?9...-den-att-bygga
2s 7200mah. Smaller in size but a little bit higher.
We have a small thread about this concept over here in Sweden. Something for you Yuppe to fill
in with?
http://rsb.se/arena/showthread.php?9...-den-att-bygga
12-30-2014, 07:35 AM
#130
Tech Adept
Heres the shop with the conversion kit in stock. Bodies as well...
http://www.tcmodels.net/index.php?pa...mart&Itemid=71
What kit do you have? Using the long rear shocks?
http://www.tcmodels.net/index.php?pa...mart&Itemid=71
What kit do you have? Using the long rear shocks?
12-30-2014, 07:58 AM
#131
Heres the shop with the conversion kit in stock. Bodies as well...
http://www.tcmodels.net/index.php?pa...mart&Itemid=71
What kit do you have? Using the long rear shocks?
http://www.tcmodels.net/index.php?pa...mart&Itemid=71
What kit do you have? Using the long rear shocks?
12-30-2014, 08:58 AM
#132
Tech Adept
Im not shure, but I have read somewhere that they are about 40mm wide. 5mm less than the tires I use.
01-24-2015, 12:22 AM
#135
Tech Rookie
hello,
can you tell me what shore you used ,front and rear wheels gt ?
thanks
can you tell me what shore you used ,front and rear wheels gt ?
thanks