40LikesSpeedmerchant Rev 8
07-01-2014, 02:11 PM
#377
07-02-2014, 03:01 AM
#381
07-02-2014, 07:10 AM
#382
The biggest thing that stands out to me is the 5 degree castor blocks. I've had the Xenon front end on my mod car for testing, and I can tell you that there would be only extraordinary circumstances where 5 degrees would work (super high bite where super glue on front and rear tires arent working). Ten degrees is the standard, adjust camber to .5 degrees and your car should be money.
07-02-2014, 09:08 AM
#383
The biggest thing that stands out to me is the 5 degree castor blocks. I've had the Xenon front end on my mod car for testing, and I can tell you that there would be only extraordinary circumstances where 5 degrees would work (super high bite where super glue on front and rear tires arent working). Ten degrees is the standard, adjust camber to .5 degrees and your car should be money.
07-02-2014, 08:46 PM
#384
Tech Adept
New black anodized lowered 12th only pod plates are now available for the Rev8. Teamtamale.com.
07-03-2014, 09:40 AM
#385
Tech Master
07-05-2014, 12:26 AM
#386
Out testing some new R1 power tonite
Also, Bruce sent me a softer set of A-arms to test
Surprising how noticeable a difference they make, not sharp enough of a feel for our conditions at TQ, but on a high grip track, they may be a very useful tuning option
Oh, and, the AE front foam bumper fits well with the new front end too
Also, Bruce sent me a softer set of A-arms to test
Surprising how noticeable a difference they make, not sharp enough of a feel for our conditions at TQ, but on a high grip track, they may be a very useful tuning option
Oh, and, the AE front foam bumper fits well with the new front end too
07-05-2014, 08:57 AM
#388
Out testing some new R1 power tonite
Also, Bruce sent me a softer set of A-arms to test
Surprising how noticeable a difference they make, not sharp enough of a feel for our conditions at TQ, but on a high grip track, they may be a very useful tuning option
Oh, and, the AE front foam bumper fits well with the new front end too
Also, Bruce sent me a softer set of A-arms to test
Surprising how noticeable a difference they make, not sharp enough of a feel for our conditions at TQ, but on a high grip track, they may be a very useful tuning option
Oh, and, the AE front foam bumper fits well with the new front end too
07-05-2014, 11:58 AM
#390
Tech Master
iTrader: (41)
My Setup is
Blue Asso centre
30wt oil
Green Spooge
Side springs I think are kit 020
Front end is Xenon which is basically Associated
5deg blocks
020 springs
Tyres pink rear, magenta front 10.5t motor
I know the front end is different to what most run but it shouldnt make that much difference.
Blue Asso centre
30wt oil
Green Spooge
Side springs I think are kit 020
Front end is Xenon which is basically Associated
5deg blocks
020 springs
Tyres pink rear, magenta front 10.5t motor
I know the front end is different to what most run but it shouldnt make that much difference.
So Tim, do you run the Speedmerchant or the CRC car?