nccattu

iTrader: (7)

My work schedule changed so I am selling my H4e. http://www.rctech.net/forum/r-c-item...-kit-body.html

scytherat

Has anyone put rear driveshafts in the front yet and run the car. I keep breaking the front cvd shafts (not broken one chub yet.btw) and was thinking of putting the steel rear shafts in the front and putting aluminium shafts in the rear

Dasmopar

Team green went 1 - 2 today. We had some rough races today and neither car ever broke as far as I know.

Emaculant

iTrader: (11)

So the other day I notice my diff was leaking so I took it apart cleaned it put it back together and it still leaks. My whole drivetrain is wet. Any thoughts on a proper diff build?

billdelong

iTrader: (33)

I'd bet it's a torn seal that backs the bearing and pin on the diff cup, happens every once in a while on many of my other cars. I'd replace the seal and apply a generous coat of green grease.

scytherat

Make sure the big o ring hasnt popped out of its seat when you screwed it bk together. They are a pain. But as said above put some green grease on all the seals/orings

http:// http://www.thercracer.com/2013/11/hobao-h4e-pro-touring-car-kit-build.html?m=0

Emaculant

iTrader: (11)

Thanks! I also noticed that the shims has o-ring marks from rubbing. I will see if I can get the slime today, I still ordererd o-rings just incase.

scytherat

Any news on these new dcjs yet?

-R2-

iTrader: (4)

Thay are in the works.

scytherat

Cool

-R2-

iTrader: (4)

Other option parts comming soon for the front steering, pretty trick looking also and a 3 gen steering knuckle is in the works, we are beefing up the pivot points on the top and bottom.

scytherat

Sweet. Hurry up with the shafts.lol i need to order some

-R2-

iTrader: (4)

More running tonite, checking the bend rate before they break the nipple.

jdeadman

iTrader: (41)

When those are ready I would love to test them Seeing as I have had soo much problems with the Gen1 and 2


Thanks

edonsohc

iTrader: (10)

finally got me an h4e coming. where's a good place to buy spare parts? I would rather have them and not need them compared to the other way around.