New Pro-trak graph software
#1
New Pro-trak graph software
A racer has written new graph software for the pro-trak that will work in windows, i know alot of people have had problems with the DOS software including me. Download from
http://pro-trak.ckdesigns.net/software.zip
This is a direct link to the file as there is no website yet..
Additiontional files may be needed in order for the software to work, download these from
http://pro-trak.ckdesigns.net/MDAC_TYP.EXE
screen shot of the charge graph
http://pro-trak.ckdesigns.net/software.zip
This is a direct link to the file as there is no website yet..
Additiontional files may be needed in order for the software to work, download these from
http://pro-trak.ckdesigns.net/MDAC_TYP.EXE
screen shot of the charge graph
#2
screen shot of discharge graph (theres nothing wrong with the numbers, my cells really are that bad! LOL)
#4
nnick - I dont know the person who wrote the program personally but i will get in touch with him and ask him about the code.
#6
what is protrack?
#7
Shop Owner
iTrader: (1)
Protrak is a charger/discharger made in England by an RC enthousiast!
To my opinion one of the best in the market
http://www.users.zetnet.co.uk/pro-trak/
Nick
To my opinion one of the best in the market
http://www.users.zetnet.co.uk/pro-trak/
Nick
#8
Pro-Trak
I agree Pro-trak is one of the best chargers out there today. Phil is an awesome guy to deal with. Thanks for the link for the new graph software, I will give it a try.
Later
Later
#9
Pro-Trak to computer ?????
I'm having trouble making the charger talk to the computer. I don't know what I'm doing wrong. Can someone help me with some suggestions??????
#10
Tech Regular
Hmm....hire them a translator? hehe....I know...bad...very bad.
Make sure the connections are good.
Has this particular PC and charger worked together before???
Make sure the connections are good.
Has this particular PC and charger worked together before???
#11
No the charger and the pc have never worked together. With my turbo 35, I configure the hyperterminal to work with com1 the serial port. I just plug it in and it sends the data to the hyperterminal and i have all of my numbers. With the pro trak, I don't know if I'm suppose to use hyperterminal. But with hyperterminal, i can set the baud rate, the parity, the stop bits and etc. I hope i can get this thing working, i'm afraid to call Phil since my bill last month was almost triple the amount it costs us per month to have a phone. I would appreciate the help.
#12
I managed to get it to work ok...it was a long time ago. I had to make sure the charger was on the main menu screen-- (charge, discharge etc) before I opened the program on the PC...it would then work.
Also I think I had to have everything plugged into the PC and charger and charger switched on before I switched the PC on...it was some weird sequence but thats what you get for DOS based and not USB!! Never had to play with hyperterminal though!
Also I think I had to have everything plugged into the PC and charger and charger switched on before I switched the PC on...it was some weird sequence but thats what you get for DOS based and not USB!! Never had to play with hyperterminal though!
#13
picco007 - What software are you using?? if your using the old DOS based software it can be hard to get to work. If you are using the DOS software download the new software from the link at the top of the thread. If your allready using the new software it should be pretty easy. This is what i do with the new software
1. plug the serial cable into com port 1 or 2
2. turn on the PC
3. conect Pro-trak to power supply
4. plug the other end of the serial cable into the pro-trak (plug on left)
5. plug the individual cell leads into the pro-trak and conect them to the cells along with the main red and black wires
6. Open the new software and choose which com port you are using (top right of the screen)
7. press the button in the software for whatever you want to do
8. choose where on the PC you what to save the data (it will be a spreadsheet file)
9. choose what to call the spreadsheet data
10. within a few seconds start what you want to do on the pro-trak
11. the graph should now start to draw and the data will be saved to the spreadsheet file
12. when the pro-trak has finished take a screen print of the graph and save.
thats it, no hyperterminal stuff at all, if you still want to use the DOS software ill post instructions for that aswell
1. plug the serial cable into com port 1 or 2
2. turn on the PC
3. conect Pro-trak to power supply
4. plug the other end of the serial cable into the pro-trak (plug on left)
5. plug the individual cell leads into the pro-trak and conect them to the cells along with the main red and black wires
6. Open the new software and choose which com port you are using (top right of the screen)
7. press the button in the software for whatever you want to do
8. choose where on the PC you what to save the data (it will be a spreadsheet file)
9. choose what to call the spreadsheet data
10. within a few seconds start what you want to do on the pro-trak
11. the graph should now start to draw and the data will be saved to the spreadsheet file
12. when the pro-trak has finished take a screen print of the graph and save.
thats it, no hyperterminal stuff at all, if you still want to use the DOS software ill post instructions for that aswell
#14
Ian,
I'm trying it now with your instructions. I hope it works and it seems like it is. Thanks for your help but I will let you know for sure what happened. Thanks again for everyone's help.
I'm trying it now with your instructions. I hope it works and it seems like it is. Thanks for your help but I will let you know for sure what happened. Thanks again for everyone's help.