3LikesThe Kyosho Inferno GT/GT2 VE Race Spec ELECTRIC on road 1/8th thread
03-25-2016, 08:08 PM
#301
I'm not sure if it has been asked in this thread (read all 20 pages tonight), but I wanted to know what the biggest motor you could install with the factory motor mount is. Could I put in a Castle 2200kv [Motor Diameter: 39.98mm (1.6")
41.78mm (1.6") with fins Motor Length: 75.18mm (3")] motor without purchasing one of the mounts on eBay. I don't have any notions of racing in any form of competitive league, just the competitiveness of friends (I could be racing a nitro stadium truck and a Monster Beetle all at once).
-c
41.78mm (1.6") with fins Motor Length: 75.18mm (3")] motor without purchasing one of the mounts on eBay. I don't have any notions of racing in any form of competitive league, just the competitiveness of friends (I could be racing a nitro stadium truck and a Monster Beetle all at once).
-c
04-03-2016, 01:26 PM
#302
My GT2e
04-04-2016, 07:45 AM
#304
Tech Regular
I'm not sure if it has been asked in this thread (read all 20 pages tonight), but I wanted to know what the biggest motor you could install with the factory motor mount is. Could I put in a Castle 2200kv [Motor Diameter: 39.98mm (1.6")
41.78mm (1.6") with fins Motor Length: 75.18mm (3")] motor without purchasing one of the mounts on eBay. I don't have any notions of racing in any form of competitive league, just the competitiveness of friends (I could be racing a nitro stadium truck and a Monster Beetle all at once).
-c
41.78mm (1.6") with fins Motor Length: 75.18mm (3")] motor without purchasing one of the mounts on eBay. I don't have any notions of racing in any form of competitive league, just the competitiveness of friends (I could be racing a nitro stadium truck and a Monster Beetle all at once).
-c
04-04-2016, 07:52 AM
#305
Thanks Dragonfueled. I just got my GT2 over the weekend. I haven't taken it out yet because I'm waiting on some parts and paintjob stuff. I grabbed a 1258tg servo for the steering too. Looking forward to it being pretty zippy. I had an XO-1 and liked it, but it didn't handle well. Everybody said these are really agile (along with an Ofna and Mugen - but they were way more) so I had to try it.
-c
-c
04-10-2016, 05:07 AM
#306
Tech Rookie
04-10-2016, 05:40 AM
#307
Tech Regular
04-15-2016, 12:54 PM
#308
Tech Rookie
Mud sideguards
Hi, I try to find and order sideguards for the GT2 VE. Can anyone help me with the article# or a link?
Thanks!
Thanks!
04-15-2016, 12:59 PM
#309
Tech Apprentice
iTrader: (4)
04-17-2016, 08:43 AM
#310
Tech Rookie
Hi All Im new to this forum as of today! Great thread
05-22-2016, 07:50 AM
#311
Tech Rookie
05-24-2016, 08:42 PM
#312
Just got mine up and running this past weekend and took it out for a little shakedown in a big parking lot up the road. After 10 or so minutes of hard running with a 4100mah 4s LiPo and a 17 tooth pinion, the motor was only slightly warm to the touch. This thing has a stupid amount of torque with the existing setup, I can break all four wheels loose even at speed. I have a set of the GRP treaded tires on order, which is what folks are using at my local track, in hopes of getting a little more grip.
- Tekin RX8 Gen 2 w/ Tekin T8 1900kv
- Hitec HS-7940TH servo
- Audi R8 LMS shell (paint still in progress)
05-24-2016, 09:12 PM
#313
Tech Regular
The grps getting more grip are an understatement. I'm using the #2 compound slicks and they damn near dead hook. Forward traction is insane. I went 90.3 mph with them last weekend and the were perfect. Great tires
05-25-2016, 12:43 PM
#314
Tech Addict
05-27-2016, 03:03 PM
#315
That is amazing! In Awe.
-c
-c